CUED Publications database

Low order modeling for fan and outlet guide vanes in aero-engines

Cui, J and Watson, R and Ma, Y and Tucker, P (2019) Low order modeling for fan and outlet guide vanes in aero-engines. Journal of Turbomachinery, 141. ISSN 0889-504X

Full text not available from this repository.

Abstract

Intakes of reduced length have been proposed with the aim of producing aero-engines with higher efficiency and reduced weight. As the intake length decreases, it is expected that stronger effects of the fan on the flow over the intake lip will be seen. If the effects of the fan cannot be ignored, a low-cost but still accurate fan model is of great importance for designing a short-intake. In this paper, a low order rotor/stator model, the immersed boundary method with smeared geometry (IBMSG), has been further developed and validated on a rig test case. The improved IBMSG is more robust than the original. The rig test case used for validation features a low-pressure compression system with a nonaxisymmetric inflow, which is representative of the inlet condition of an aero-engine at its cruise condition. Both the fan and the outlet guide vanes (OGVs) are modeled using IBMSG. A detailed analysis is carried out on the flow both upstream and downstream of the fan. After validating the IBMSG method against the rig test case, a short-intake case, coupled with a fan designed for the next generation of aero-engines, is further investigated. It is found that compared with the intake-alone case, the inflow distortion at the fan face is significantly reduced by the presence of fan. Due to this increased interaction between the fan and the flow over the intake lip, accounting for the effects of the downstream fan is shown to be essential when designing a short intake.

Item Type: Article
Subjects: UNSPECIFIED
Divisions: Div A > Fluid Mechanics
Depositing User: Unnamed user with email sms67@cam.ac.uk
Date Deposited: 27 Nov 2020 20:12
Last Modified: 09 Sep 2021 01:57
DOI: 10.1115/1.4042202