CUED Publications database

Flame imaging of gas-turbine relight

Read, RW and Rogerson, JW and Hochgreb, S (2010) Flame imaging of gas-turbine relight. AIAA Journal, 48. pp. 1919-1927. ISSN 0001-1452

Full text not available from this repository.


High-altitude relight inside a lean-direct-injection gas-turbine combustor is investigated experimentally by highspeed imaging. Realistic operating conditions are simulated in a ground-based test facility, with two conditions being studied: one inside and one outside the combustor ignition loop. The motion of hot gases during the early stages of relight is recorded using a high-speed camera. An algorithm is developed to track the flame movement and breakup, revealing important characteristics of the flame development process, including stabilization timescales, spatial trajectories, and typical velocities of hot gas motion. Although the observed patterns of ignition failure are in broad agreement with results from laboratory-scale studies, other aspects of relight behavior are not reproduced in laboratory experiments employing simplified flow geometries and operating conditions. For example, when the spark discharge occurs, the air velocity below the igniter in a real combustor is much less strongly correlated to ignition outcome than laboratory studies would suggest. Nevertheless, later flame development and stabilization are largely controlled by the cold flowfield, implying that the location of the igniter may, in the first instance, be selected based on the combustor cold flow. Copyright © 2010.

Item Type: Article
Divisions: Div A > Energy
Depositing User: Cron Job
Date Deposited: 17 Jul 2017 19:36
Last Modified: 16 Mar 2021 07:29
DOI: 10.2514/1.J050105