Burton, DMF and Burton, DMF and Babinsky, H and Bruce, PJK (2010) Experimental investigation into parameters governing corner interactions for transonic shock wave/ boundary layer interactions. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition.Full text not available from this repository.
Experiments were conducted investigating the interaction between a normal shock wave and a corner boundary layer in a constant area rectangular duct. Active corner suction and passive blowing were applied to manipulate the natural corner flows developing in the working section of the Cambridge University supersonic wind tunnel. In addition robust vane micro-vortex generators were applied to the corners of the working section. Experiments were conducted at Mach numbers of M∞=1.4 and 1.5. Flow visualisation was carried out through schlieren and surface oil flow, while static pressures were recorded via floor tappings. The results indicate that an interplay occurs between the corner flow and the centre line flow. It is believed that corner flow separation acts to induce a shock bifurcation, which in turn leads to a smearing of the adverse pressure gradient elsewhere. In addition the blockage effect from the corners was seen to result in a reacceleration of the subsonic post-shock flow. As a result manipulation of the corner regions allows a separated or attached centre line flow to be observed at the same Mach number. Copyright © 2010 by Babinsky, Burton, Bruce.
|Divisions:||Div A > Fluid Mechanics|
|Depositing User:||Cron job|
|Date Deposited:||16 Jul 2015 14:12|
|Last Modified:||04 Sep 2015 01:52|