Yuan, W and Coombs, TA and Kim, JH and Han Kim, C and Kvitkovic, J and Pamidi, S (2011) Measurements and calculations of transport AC loss in second generation high temperature superconducting pancake coils. Journal of Applied Physics, 110. ISSN 0021-8979Full text not available from this repository.
Theoretical and experimental AC loss data on a superconducting pancake coil wound using second generation (2 G) conductors are presented. An anisotropic critical state model is used to calculate critical current and the AC losses of a superconducting pancake coil. In the coil there are two regions, the critical state region and the subcritical region. The model assumes that in the subcritical region the flux lines are parallel to the tape wide face. AC losses of the superconducting pancake coil are calculated using this model. Both calorimetric and electrical techniques were used to measure AC losses in the coil. The calorimetric method is based on measuring the boil-off rate of liquid nitrogen. The electric method used a compensation circuit to eliminate the inductive component to measure the loss voltage of the coil. The experimental results are consistent with the theoretical calculations thus validating the anisotropic critical state model for loss estimations in the superconducting pancake coil. © 2011 American Institute of Physics.
|Divisions:||Div B > Electronics, Power & Energy Conversion|
|Depositing User:||Unnamed user with email firstname.lastname@example.org|
|Date Deposited:||18 May 2016 17:49|
|Last Modified:||30 Jun 2016 05:22|