Giannopoulos, IP and Burgoyne, CJ (2012) Accelerated and real-time creep and creep-rupture results for aramid fibers. Journal of Applied Polymer Science, 125. pp. 3856-3870. ISSN 0021-8995Full text not available from this repository.
This article presents results from conventional creep tests (CCT) and two accelerated test methods (the stepped isothermal method (SIM) and the stepped isostress method (SSM)) to determine the creep and creep-rupture behavior of two different aramid fibers, Kevlar 49 and Technora. CCT are regarded as the true behavior of the yarn, but they are impractical for long-term use where failures are expected only after many years. All the tests were carried out on the same batches of yarns, and using the same clamping arrangements, so the tests should be directly comparable. For both materials, SIM testing gives good agreement with CCT and gave stress-rupture lifetimes that followed the same trend. However, there was significant variation for SSM testing, especially when testing Technora fibers. The results indicate that Kevlar has a creep strain capacity that is almost independent of stress, whereas Technora shows a creep strain capacity that depends on stress. Its creep strain capacity is approximately two to three times that of Kevlar 49. The accelerated test methods give indirect estimates for the activation energy and the activation volume of the fibers. The activation energy for Technora is about 20% higher than that for Kevlar, meaning that it is less sensitive to the effects of increasing temperature. The activation volume for both materials was similar, and in both cases, stress dependent. Copyright © 2012 Wiley Periodicals, Inc.
|Uncontrolled Keywords:||accelerated testing creep creep rupture Kevlar 49 stepped isostress method stepped isothermal method Technora|
|Divisions:||Div D > Structures|
|Depositing User:||Cron job|
|Date Deposited:||04 Feb 2015 22:52|
|Last Modified:||05 Feb 2015 08:15|