CUED Publications database

Plastic limit solution for the response of plate anchors under combined translational and torsional undrained loading

Nouri, H and Biscontin, G and Aubeny, C (2011) Plastic limit solution for the response of plate anchors under combined translational and torsional undrained loading. In: UNSPECIFIED pp. 455-462..

Full text not available from this repository.

Abstract

Plate anchors are increasingly being used to moor large floating offshore structures in deep and ultradeep water. These facilities impart substantial vertical uplift loading to plate anchors. However, extreme operating conditions such as hurricane loading often result in partial system failures, with significant change in the orientation of the remaining intact mooring lines. The purpose of this study is to investigate the undrained pure translational (parallel to plate) and torsional bearing capacity of anchor plates idealized as square and rectangular shaped plates. Moreover, the interaction response of plate anchors under combined translational and torsional loading is studied using a modified plastic limit analysis (PLA) approach. The previous PLA formulation which did not account for shear-normal force interaction on the vertical end faces of the plate provides an exact solution to the idealized problem of an infinitely thin plate but only an approximate solution to the problem of a plate of finite thickness. This is also confirmed by the three-dimensional finite element (FE) results, since the PLA values exceed FE results as the thickness of the plate increases. By incorporating the shear-normal interaction relationship in the modified solution, the torsional bearing capacity factors, as well as the plate interaction responses are enhanced as they show satisfactory agreement with the FE results. The interaction relationship is then obtained for square and rectangular plates of different aspect ratios and thicknesses. The new interaction relationships could also be used as an associated plastic failure locus for combined shear and torsional loading to predict plastic displacements and rotations in translational and torsional loading modes as well. Copyright © 2011 by the International Society of Offshore and Polar Engineers (ISOPE).

Item Type: Conference or Workshop Item (UNSPECIFIED)
Uncontrolled Keywords: Finite element analysis Interaction curve Plastic limit analysis Plate anchor Torsional and translational bearing capacity
Subjects: UNSPECIFIED
Divisions: Div D > Geotechnical and Environmental
Depositing User: Cron Job
Date Deposited: 07 Mar 2014 12:10
Last Modified: 08 Dec 2014 02:19
DOI: