CUED Publications database

Controlling the optical fiber output beam profile by focused ion beam machining of a phase hologram on fiber tip.

Han, J and Sparkes, M and O'Neill, W (2015) Controlling the optical fiber output beam profile by focused ion beam machining of a phase hologram on fiber tip. Appl Opt, 54. pp. 890-894.

Full text not available from this repository.

Abstract

A phase hologram was machined on an optical fiber tip using a focused ion beam (FIB) system so that a ring-shaped beam emerges from the fiber tip. The fiber used for this work was a commercial single-mode optical fiber patch cable for a design wavelength of 633 nm with a germanosilicate core. The ring-shaped beam was chosen to ensure a simple geometry in the required phase hologram, though the Gerchberg-Saxton algorithm can be used to calculate a hologram for an arbitrary beam shape. The FIB machining took approximately 45 min at 30 kV and 200 pA. The radius of the resulting ring beam was 0.083 m at 1 m standoff, as compared to 0.1 m as was initially desired. Results suggest that this imaging technique may provide a basis for a beam-shaping method with several advantages over the current commercial solutions, having permanent alignment, compactness, and mechanical robustness. However, it would appear that minimizing the speckle pattern will remain a critical challenge for this technique to become widely implemented.

Item Type: Article
Subjects: UNSPECIFIED
Divisions: Div E > Production Processes
Depositing User: Cron Job
Date Deposited: 17 Jul 2017 19:21
Last Modified: 21 Sep 2017 01:36
DOI: