CUED Publications database

Winglets for improved aerothermal performance of high pressure turbines

Coull, JD and Atkins, NR and Hodson, HP (2014) Winglets for improved aerothermal performance of high pressure turbines. Journal of Turbomachinery, 136. ISSN 0889-504X

Full text not available from this repository.


© 2014 by ASME. This paper investigates the design of winglet tips for unshrouded high pressure turbine rotors considering aerodynamic and thermal performance simultaneously. A novel parameterization method has been developed to alter the tip geometry of a rotor blade. A design survey of uncooled, flat-tipped winglets is performed using Reynolds-averaged Navier-Stokes (RANS) calculations for a single rotor at engine representative operating conditions. Compared to a plain tip, large efficiency gains can be realized by employing an overhang around the full perimeter of the blade, but the overall heat load rises significantly. By employing an overhang on only the early suction surface, significant efficiency improvements can be obtained without increasing the overall heat transfer to the blade. The flow physics are explored in detail to explain the results. For a plain tip, the leakage and passage vortices interact to create a three-dimensional impingement onto the blade suction surface, causing high heat transfer. The addition of an overhang on the early suction surface displaces the tip leakage vortex away from the blade, weakening the impingement effect and reducing the heat transfer on the blade. The winglets reduce the aerodynamic losses by unloading the tip section, reducing the leakage flow rate, turning the leakage flow in a more streamwise direction, and reducing the interaction between the leakage fluid and end wall flows. Generally, these effects are most effective close to the leading edge of the tip where the leakage flow is subsonic.

Item Type: Article
Divisions: Div A > Turbomachinery
Depositing User: Cron Job
Date Deposited: 17 Jul 2017 19:45
Last Modified: 07 Dec 2017 01:36