CUED Publications database

Items where Division is "Div A > Fluid Mechanics" and Year is 1993

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: B | D | G | H | K | M | R | S | T
Number of items: 19.

B

Babinsky, H and Edwards, JA (1993) The application and analysis of liquid crystal thermographs in short duration hypersonic flow. In: 31st Aerospace Sciences Meeting and Exhibit, 1993-1-11 to 1993-1-14, Reno, Nevada, U.S.A..

Britter, RE (1993) The evaluation of technical models used for major-accident hazard installations. Technical Report. Commission of the European Communities, DG XII/E-1.

D

Davidson, PA (1993) Pressure forces in the MHD propulsion of submersibles. Magnitnaja Gidrodinamika, 29. p. 49-.

Davidson, PA (1993) Similarities in the structure of swirling and buoyancy-driven flows. Journal of Fluid Mechanics, 252. pp. 357-382. ISSN 0022-1120

G

Graham, WR (1993) Evaluation of a model for boundary-layer induced noise in aircraft. NOISE CON, 1993. P.145-. ISSN 0736-2935

Graham, WR (1993) Vibration and acoustic radiation of fluid-loaded plates. In: Proceedings of NOISE, 1993-5- to 1993-6-, St Petersburg, Russia.

Grobelbauer, HP and Fannelop, TK and Britter, RE (1993) The propagation of intrusion fronts of high density ratios. Journal of Fluid Mechanics, 250. pp. 669-687. ISSN 0022-1120

H

Hunt, GR (1993) The Aaberg bench exhaust hood - a comparison of free and wall jet models. In: UNSPECIFIED pp. 91-96..

Hunt, GR and Ingham, DB (1993) 03 O 03 A 3-dimensional axisymmetric model of the air flow pattern created by a local exhaust ventilation system reinforced by a turbulent radial jet flow. Journal of Aerosol Science, 24. S15-S16. ISSN 0021-8502

Hunt, GR and Ingham, DB (1993) Pollutant control using an Aaberg exhaust hood. In: Institute of Chemical Engineers Research Event, -- to -- pp. 230-232..

Hunt, GR and Ingham, DB (1993) A mathematical model of the fluid flow of a slot exhaust hood reinforced by a two-dimensional jet flow. Journal of Mathematical Engineering, 4. pp. 227-247.

K

Kwong, AHM and Dowling, AP (1993) Active boundary-layer control in diffusers. In: UNSPECIFIED.

M

MACQUISTEN, MA and DOWLING, AP (1993) LOW-FREQUENCY COMBUSTION OSCILLATIONS IN A MODEL AFTERBURNER. COMBUST FLAME, 94. pp. 253-264. ISSN 0010-2180

R

Ramsay, SR and Britter, RE (1993) An advanced box model to address some outstanding problems in dense gas dispersion. In: Air Pollution Modeling And Its Application IX. Plenum Publishing Corporation, USA, -.

S

Slepian, RM and Davidson, PA and Keeton, AR (1993) Electromagnetic modulation of molten metal flow. Progress in Astronautics and Aeronautics, 148. pp. 50-65. ISSN 0079-6050

Stollery, JL and Kumar, D and Atcliffe, PA and Babinsky, H (1993) Control effectiveness at hypersonic speeds. In: UNSPECIFIED 5.1-5.10..

T

Tucker, PG (1993) The Influence of Rotational Reynolds Number on the Fluid Flow in a Rotating Cavity with an Axial Throughflow of Cooling Air. Technical Report. UNSPECIFIED.

Tucker, PG (1993) Numerical and Experimental Investigation of Flow Structure and Heat Transfer in a Rotating Cavity With an Axial Throughflow of Cooling Air. PhD thesis, UNSPECIFIED.

Tucker, PG (1993) Prediction of Shroud Heat Transfer in a Rotating Cavity with an Axial Throughflow of Air. Technical Report. UNSPECIFIED.

This list was generated on Tue Jan 18 23:02:32 2022 GMT.