CUED Publications database

Items where Year is 2001

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | X | Y | Z
Number of items: 975.

A

Abu Khaizaran, MS and Rajamani, HS and Palmer, PR (2001) The high power IGBT current source inverter. In: IEEE Industry Applications Conference, 2001, 2001-9-30 to 2001-10-4, Chicago, IL, USA pp. 879-888..

Adhikari, S and Woodhouse, J (2001) Identification of damping: part 1, viscous damping. Journal of Sound and Vibration, 243. pp. 43-62. ISSN 0022-460X

Adhikari, S and Woodhouse, J (2001) Identification of damping: part 2, non-viscous damping. Journal of Sound and Vibration, 243. pp. 63-88. ISSN 0022-460X

Ahmed, R and Sutcliffe, MPF (2001) An experimental investigation of surface pit evolution during cold-rolling or drawing of stainless steel strip. Transactions of the ASME: Journal of Tribology, 123. pp. 1-7. ISSN 0742-4787

Ahmed, S (2001) Understanding the use and reuse of experience in engineering design. PhD thesis, UNSPECIFIED.

Ahmed, S and Wallace, KM (2001) Developing a support system for novice designers in industry. In: Design Management-Process and Information Issues. John Wiley and Sons Limited, pp. 75-82.

Ahmed, S and Wallace, KM and Langdon, PM (2001) Identifying the strategic knowledge of experienced designers. In: Strategic Knowledge and Concept Formation III. Key Centre of Design Computing and Cognitions, Sydney, Australia, pp. 31-53.

Aji, S and Jin, H and Khandekar, A and MacKay, DJC and McEliece, RJ (2001) BSC thresholds for code ensembles based on "typical pairs" decoding. In: UNSPECIFIED pp. 195-210..

Akamatsu, S and Dowling, AP (2001) Three-dimensional thermoacoustic oscillation in a premix combustor. In: ASME Turbo Expo 2001, 2001-6-4 to 2001-6-7, New Orleans, LA, US.

Akiyama, M and Alexandrou, I and Chhowalla, M and Amaratunga, GAJ (2001) Optimizing hardness of CNx thin films by dc magnetron sputtering and a statistical approach. J MATER SCI, 36. pp. 5397-5401. ISSN 0022-2461

Al Tabbaa, A (2001) Stabilisation/modification technologies. CIWM: The Journal for Waste & Resource Management Professionals. pp. 37-41. ISSN 0263-8126

Al Tabbaa, A and Chitambira, B and Kan, I (2001) Recent research into innovative and sustainable in-ground reactive barriers. In: The 15th International Conference Soil Mechanics Geotechnical Engineering (XVth ICSMGE) v.3, 2001-8- to -- pp. 1951-1954..

Al Tabbaa, A and Waterfall, PW and Chitambira, B (2001) Geoenvironmental applications of low permeability soil-shredded tyre mixtures. In: The International Symposium on the Recycling and Reuse of Used Tyres, 2001-3-19 to 2001-3-20 pp. 175-186..

Alexander, KL and Clarkson, PJ and Bishop, D and Fox, S (2001) Good design practice for medical devices and equipment - a framework. Institute for Manufacturing.

Alexandro, I and Papworth, AJ and Rafferty, B and Amaratunga GAJ, and Kiely, CJ and Brown, LM (2001) Calculation of the electronic structure of carbon films using electron energy loss spectroscopy. Ultramicroscopy, 90. pp. 39-45. ISSN 0304-3991

Alfaiate, J and Wells, GN and Sluys, LJ (2001) Strong embedded discontinuities for simulating fracture in quasi-brittle materials. In: 4th International Conference on Fracture Mechanics of Concrete Structures (FRAMCOS4), 2001-5-28 to 2001-6-1, Cachan, France pp. 749-756..

Allsopp, DN and Hutchings, IM (2001) Micro-scale abrasion and scratch response of PVD coatings at elevated temperatures. Wear, 250. pp. 1308-1314. ISSN 0043-1648

Allwood, JM and Cox, BM and Latif, SS (2001) The structured development of simulation-based learning tools with an example for the Taguchi method. IEEE Transactions on Education, 44. pp. 347-354. ISSN 0018-9359

Allwood, JM and Cox, BM and Latif, SS (2001) The structured development of simulation-based learning tools with an example for the Taguchi method. IEEE Transactions on Education, 44. pp. 347-354.

Amaratunga, GAJ and Udrea, F (2001) Power devices for high voltage integrated circuits: new device and technology concepts. In: The 24th International Semiconductor Conference; CAS 2001, 2001-10- to --, Sinaia, Romania pp. 441-448..

Andrieu, A and Doucet, A and Fitzgerald, WJ (2001) An introduction to Monte Carlo methods for Baeysian data analysis. In: Nonlinear Dynamics and Statistics. Birkhäuser Boston, pp. 169-218.

Andrieu, A and Doucet, A and Fitzgerald, WJ and Perez, JM (2001) Bayesian models selection approaches to model selection. In: Nonlinear and Nonstationary Signal Processing. Cambridge University Press, Cambridge, UK, pp. 1-41.

Annaswamy, AM and Evesque, S and Dowling, AP and Niculescu, S (2001) Adaptive control of a class of time-delay systems in the presence of saturation. In: Adaptive Control of Nonsmooth Dynamic Systems. Springer-Verlag, New York, -.

Ashby, MF and Bréchet, Y and Salvo, L (2001) Sélection des matériaux et des procédés. Traité des Matériaux, 20 . Presses Polytechniques et Universitaires Romandes.

Ashcroft, ADC and Keates, S and Clarkson, PJ (2001) User capabilities and computer access. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Aurisicchio, M (2001) The capture and structure of engineering design knowledge.

Austin, S and Steele, J and MacMillan, S and Kirby, P and Spence, R (2001) Mapping the conceptual design activity of interdisciplinary teams. Design Studies, 22. pp. 211-232. ISSN 0142-694X

B

Babinsky, H (2001) Paraglider and kite aerodynamics.

Babinsky, H and Kuschel, U and Hodson, HP and Moore, DF and Welland, ME (2001) Geometries for five-hole-type probes with planar sensor arrays. AIAA Journal, 39. pp. 2414-2416. ISSN 0001-1452

Babu, HN and Kambara, N and McCrone, JE and Cooper, JR and Tallon, JL and Cardwell, DA (2001) Fabrication of Ca-doped large grain Y-Ba-Cu-O superconductors. IEEE Transactions on Applied Superconductivity, 11. pp. 3521-3524. ISSN 1051-8223

Babu, NH and Kambara, M and McCrone, J and Cooper, JR and Tallon, JL and Cardwell, DA (2001) Fabrication of Ca-doped large grain Y-Ba-Cu-O superconductors. In: UNSPECIFIED pp. 3521-3524..

Bachmann, P and Van Elsbergen, V and Weichert, DU and Zhong, G and Robertson, J (2001) CVD diamond: a novel high γ-coating for plasma display panels? Diamond and Related Materials, 10. pp. 809-817. ISSN 0925-9635

Baker, RC and Gimson, C (2001) The effects of manufacturing methods on the precision of insertion and in-line thermal mass flowmeters. Flow Measurement and Instrumentation, 12. pp. 113-121. ISSN 0955-5986

Baker, RC and Gregory, MJ (2001) Special issue of the journal focusing on flowmeter manufacture - Guest joint editors Roger C. Baker and Michael J. Gregory. FLOW MEAS INSTRUM, 12. pp. 85-87. ISSN 0955-5986

Baker, RC and Gregory, MJ (2001) Flowmeter manufacture. Flow Measurement and Instrumentation: Special Issue, 12. pp. 85-87. ISSN 0955-5986

Baker, RC and Gregory, MJ and Lucas, JW (2001) East of England manufacturing: a consultation and implications for policy.

Baker, RC and Sorbie, I (2001) A review of the impact of component variation in the manufacturing process on variable area (VA) flowmeter performance. Flow Measurement and Instrumentation, 12. pp. 101-112. ISSN 0955-5986

Balazs, ME and Clarkson, PJ and Parks, GT (2001) Mapping the design optimization landscape. In: The 13th International Conference on Engineering Design (ICED): Design Methods for Performance and Sustainability, -- to -- pp. 211-218..

Balazs, ME and Li, J and Clarkson, PJ and Parks, GT (2001) Multimodal function optimization using species conservation. In: 5th International Conference on Artificial Neural Networks and Genetic Algorithms, 2001-4-22 to 2001-4-25, Prague, Czech Republic pp. 252-255..

Balazs, ME and Li, JP and Parks, GT and Clarkson, PJ (2001) The effect of distance measure in a GA with species conservation. In: Proceedings of the 2001 Congress on Evolutionary Computation (CEC2001), 2001-5-27 to 2001-5-30, Seoul, Korea pp. 67-74..

Balazs, ME and Parks, GT and Clarkson, PJ (2001) Optimization in industry - what does industry really need? In: 3rd Optimization in Industry Conference (Optimisation in Industry III), 2001-6-17 to 2001-6-22, Il Ciocco Resort, Tuscany, Italy pp. 15-24..

Ball, JK and Bove, MJ and Stone, RJ and Collings, N (2001) Validation of a cyclic NO formation model with fast NO measurements. SAE Transactions, 110. pp. 854-867. ISSN 0096-736X

Barr, G and Sims williams, J and Burgess, S and Clarkson, PJ (2001) The organisation and management of engineering tenders. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 497-504..

Barrett, M (2001) Expert commentaries. European Management Journal, 19. pp. 438-442.

Barrett, M (2001) Professionalization in action: accountants' attempt at building a network of support for the webtrust e-commerce seal of assurance. In: UNSPECIFIED.

Barrett, M and Cooper, DJ and Jamal, K (2001) Managing across the 'friction of space' in auditing. In: UNSPECIFIED.

Barrett, M and Sahay, S and Walsham, G (2001) Information technology and social transformation: GIS for forestry management in India. The Information Society, 17. pp. 5-20. ISSN 0197-2243

Barrett, M and Scott, S (2001) Electronic trading and the transformation of futures exchanges in global work times. In: UNSPECIFIED.

Batten, CF and Holburn, DM and Breton, BC and Caldwell, NHM (2001) Sharpness search algorithms for automatic focusing in the scanning electron microscope. Scanning, 23. pp. 112-113. ISSN 0161-0457

Bauerle, D and Pedarnig, JD and Rossler, R and Stockinger, W and Lang, W and Durrell, JH and Evetts, JE (2001) Pulsed-laser deposition and characterization of high-temperature superconducting films. In: 9th International Conference on Laser-Assisted Microtechnology, -- to --, 23-25 Aug. 2000 pp. 220-227..

Bavidge, NG and Boero, M and Migliorato, P and Shimoda, T (2001) Switch-on transient behavior in low-temperature polysilicon thin film transistors. Proceedings of SPIE, Flat P. pp. 76-84. ISSN 0361-0748

Bavidge, NG and Boero, M and Migliorato, P and Shimoda, T (2001) The kink effect: transient measurements of low temperature polysilicon thin film transistors. In: International Workshop on Active Matrix Liquid Crystal Displays (AM-LCD'01), 2001-7-11 to 2001-7-13, Tokyo, Japan p.163-..

Beghi, MG and Bottani, CE and Bassi, AL and Tanner, BK and Ferrari, AC and Teo, KBK and Robertson, J (2001) Measurement of the elastic constants of nanometric films. Proceedings of SPIE - The International Society for Optical Engineering, 4449. pp. 119-130. ISSN 0277-786X

Bennett, EM and Al Tabbaa, A (2001) Immobilisation of contaminated soil using ordinary Portland cement and hydrofoam. In: The 3rd BGA Geoenvironmental Engineering Conference: Geoenvironmental Impact Management, 2001-9- to -- pp. 165-170..

Berenov, A and Lockman, Z and Qi, X and Bugoslavsky, Y and Cohen, LF and Jo, MH and Stelmashenko, NA and Tsaneva, VN and Kambara, VN and Babu, NH and Cardwell, DA and Blamire, MG and Macmanus Driscoll, JL (2001) Growth of strongly biaxially aligned MgB2 thin films on sapphire by postannealing of amorphous precursors. Applied Physics Letters, 79. pp. 4001-4003. ISSN 0003-6951

Berenov, A and Lockman, Z and Qi, X and MacManus-Driscoll, JL and Bugoslavsky, Y and Cohen, LF and Jo, MH and Stelmashenko, NA and Tsaneva, VN and Kambara, M and Babu, NH and Cardwell, DA and Blamire, MG (2001) Growth of strongly biaxially aligned MgB2 thin films on sapphire by postannealing of amorphous precursors. APPL PHYS LETT, 79. pp. 4001-4003. ISSN 0003-6951

Berghi, MG and Bottani, CE and LiBassi, A and Pastorelli, A and Tanner, BK and Ferrari, AC and Robertson, J (2001) Elastic constants of nanometer thick diamond-like carbon films. Materials Research Society Symposium Proceedings, 675. W11.6-W11.8. ISSN 1526-2421

Bermell garcia, P and Li, G and Fan, I and Porter, R (2001) Effective abstraction of engineering knowledge for KBE implementation. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 99-106..

Bewick, CL and Adams, MJ and Schwaller, PJG and Xu, L (2001) Noise and aerodynamic design and the test of a low tip speed fan. In: 7th AIAA/CEAS Aeroacoustics Conference, 2001-5-28 to 2001-5-30, Maastricht, Netherlands.

Biscontin, G and Pestana, JM (2001) Influence of Peripheral Velocity on Vane Shear Strength of an Artificial Clay. Geotechnical Testing Journal, 24. pp. 423-429. ISSN 0149-6115

Blackburn, C and Young, SJ (2001) Enhanced speech recognition using an articulatory production model trained on X-ray data. Computer Speech and Language, 15. pp. 195-216. ISSN 0885-2308

Blakemore, SJ and Frith, CD and Wolpert, DM (2001) The cerebellum is involved in predicting the sensory consequences of action. Neuroreport, 12. pp. 1879-1884. ISSN 0959-4965

Blessing, LTM and Baumgaertner, CE (2001) Establishing casual links between success characteristics and project outcome. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 189-196..

Boes, N and Al Tabbaa, A (2001) Long-term durability of in-situ auger-mixed stabilised/solidified contaminated made ground. In: The 3rd BGA Geoenviromental Engineering Conference: Geoenvironmental Impact Management, 2001-9- to -- pp. 171-176..

Bolton, MD and Cheng, YP (2001) Micro-geomechanics. In: International Workshop on Constitutive and Centrifuge Modelling: Two Extremes, 2001-7-8 to 2001-7-13, Monte Verita, Switzerland pp. 59-74..

Borghi, X and White, DJ and Bolton, MD and Springman, SM (2001) Empirical pile design based on CPT data: an explanation for the reduction of unit base resistance between CPTs and piles. In: 5th International Conference on Deep Foundation Practice, 2001-4- to --, Singapore pp. 125-132..

Bourne, MC and Neely, A and Mills, JF (2001) Why performance measurement initiatives succeed and fail, the perceptions of participating managers. In: What Really Matters in Operation Management, the 8th EuroMA Conference, 2001-6- to -- pp. 1174-1185..

Bowman, ET and Soga, K (2001) Time effects in creep of sands. In: Constitutive and Centrifuge Modelling : Two Extremes; the Workshop on Constitutive and Centrifuge Modelling: Two Extremes, 2001-7-8 to 2001-7-13 pp. 259-265..

Bowman, ET and Soga, K and Drummond, TW (2001) Particle shape characterisation using Fourier descriptor analysis. Geotechnique, 51. pp. 545-554. ISSN 0016-8505

Bracewell, RH and Shea, K (2001) CaeDRe: A product platform to support creation and evaluation of advanced computer aided engineering tools. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 539-546..

Bracewell, RH and Shea, K and Langdon, PM and Blessing, LTM and Clarkson, PJ (2001) A methodology for computational design tool research. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 181-188..

Bracewell, RH and Wallace, KM (2001) Designing a representation to support function; means based synthesis of mechanical design solutions. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 275-282..

Bradley, AD and Lo, W and Mironova, M and Babu, NH and Cardwell, DA and Campbell, AM and Salama, K (2001) Microstructure and growth of joins in melt-textured YBa2Cu3O7-δ. Journal of Materials Research, 16. pp. 2298-2305. ISSN 0884-2914

Brezeanu, G and Badila, M and Godignon, P and Millan, J and Udrea, F and Mihaila, A and Amaratunga, GAJ (2001) UV detection properties of epitaxial 6H-SiC diodes with oxide ramp termination. In: The 24th International Semiconductor Conference, CAS 2001, 2001-10- to --, Sinaia, Romania pp. 345-348..

Brezeanu, G and Badila, M and Godignon, P and Millan, J and Udrea, F and Mihaila, A and Amaratunga, GAJ (2001) An effective high-voltage termination for SiC planar pn junctions for use in high-voltage devices and UV detectors. In: The 9th International Conference on Silicon Carbide and Related Materials ( ICSCRM2001), 2001-10- to --, Tsukuba, Japan pp. 1301-1304..

Brezeanu, M and Badila, M and Tudor, B and Milan, J and Godignon, SJ and Udrea, F and Amaratunga, GAJ and Mihaila, A (2001) Accurate modeling and parameter extraction for 6H-SiC Schottky barrier diodes (SBDs) with nearly ideal breakdown voltage. IEEE Transactions on Electron Devices, 48. pp. 2148-2153. ISSN 0018-9383

Briggs, GA and Britter, RE and Hanna, SR and Havens, JA and Robins, AG and Snyder, WH (2001) Dense gas vertical diffusion over rough surfaces: results of wind-tunnel studies. Atmospheric Environment, 35. pp. 2265-2284. ISSN 1352-2310

Brilakis, I (2001) Standardization of Construction Documentation. Other thesis, UNSPECIFIED.

Britter, RE and Caton, F and Cooke, K and Di Sabatino, S and Nickless, G and Simmonds, P (2001) Analysis of measurement from three tracer experiments in the city of Birmingham. In: NERC/URGENT Annual Conference, 2001-4-4 to 2001-4-6, Birmingham, UK.

Britter, RE and Caton, F and Cooke, KE and Di Sabatino, S and Simmonds, PG and Nickless, G (2001) Results from three field tracer experiments at the neighbourhood scale in the city of Birmingham, UK. In: 3rd International Conference on Urban Air Quality: Measurement Modeling and Management, 2001-3-19 to 2001-3-23, Loutraki, Greece pp. 79-90..

Britter, RE and Hanna, S (2001) Flow and dispersion in urban canopies. In: American Physical Society: 54th Annual Meeting of the Division of Fluid Dynamics, 2001-11-18 to 2001-11-20, San Diego, CA, USA.

Britter, RE and Hanna, SR and Bentham, T (2001) Flow and dispersion in urban and industrial areas. In: 3rd International Symposium on Environmental Hydraulics, 2001-12-5 to 2001-12-8, Tempe, AZ, USA.

Broadhurst, A and Drummond, TW and Cipolla, R (2001) A probabilistic framework for space carving. In: The 8th IEEE International Conference on Computer Vision (ICCV'01), 2001-7- to --, Vancouver, Cananda pp. 388-393..

Brookes, SJ and Cant, RS and Dupere, IDJ and Dowling, AP (2001) Computational modelling of self-excited combustion instabilities. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 123. pp. 322-326. ISSN 0742-4795

Brough, MJ and Al Tabbaa, A and Martin, RJ (2001) Laboratory investigation of optimum conditions for sub-surface biofilm barriers. In: The 3rd BGA Geoenvironmental Engineering Conference: Geoenvironmental Impact Management, 2001-9- to -- pp. 177-182..

Brown, PJ and Sirringhaus, H and Harrison, M and Shkunov, M and Friend, RH (2001) Optical spectroscopy of field-induced charge in self-organized high mobility poly(3-hexylthiophene). PHYS REV B, 63. -. ISSN 1098-0121

Brown, R and Phaal, R (2001) The use of technology roadmapping as a tool to manage technology developments and maximise the value of research activity. In: International Conference on Mail Technology, 2001-4-24 to 2001-4-25, Brighton, UK.

Brown, R and Phaal, R (2001) The use of technology roadmapping as a tool to manage technology developments and maximize the value of research activity. In: UNSPECIFIED pp. 3-11..

Burdet, E and Osu, R and Franklin, DW and Milner, TE and Kawato, M (2001) The central nervous system stabilizes unstable dynamics by learning optimal impedance. NATURE, 414. pp. 446-449. ISSN 0028-0836

Burgoyne, C (2001) Non-metallic reinforcement for concrete. Concrete (London), 35. p. 14. ISSN 0010-5317

Burgoyne, C (2001) Professor Sir Alan Harris 1916-2000 - Obituary. MAG CONCRETE RES, 53. pp. 71-72. ISSN 0024-9831

Burgoyne, CJ (2001) Ductility and deformability in beams prestressed with FRP tendons. In: The International Conference on FRP Composites in Civil Engineering, 2001-12- to --, Hong Kong, China pp. 15-26..

Burgoyne, CJ (2001) Obituary: Professor Sir Alan Harris 1916-2000. Magazine of Concrete Research, 53. pp. 71-72. ISSN 0024-9831

Burgoyne, CJ (2001) Rational use of advanced composites in concrete. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 146. pp. 253-262. ISSN 0965-0911

Burgoyne, CJ and Stratford, TJ (2001) Lateral instability of long-span prestressed concrete beams on flexible bearings. The Structural Engineer, 79. pp. 23-26. ISSN 0039-2553

C

C, J and Yuliang, L and Yunsheng, L and Dongfang, L and C, Y (2001) Experimental study of steady concentration fields in turbulent wakes. Experiments in Fluids, 31. pp. 269-276. ISSN 0723-4864

Cakmak, B and Penty, RV and White, IH (2001) Scanning electron and atomic force microscopy measurements of ion beam etched InP samples using Ar/H2 chemistry. In: 4th Conference on Optical Manufacturing and Testing, 2001-8- to --, San Diego, CA, USA pp. 306-312..

Cakmak, B and Penty, RV and White, IH (2001) Surface assessment of a chemically assisted ion beam etched InP sample using scanning electron microscopy and atomic force microscopy techniques. In: 4th Pacific Rim Conference on Lasers and Electro-Optics, CLEO' 01, 2001-7- to --, Chiba, Japan pp. 224-225..

Caldwell, NHM and Breton, BC and Holburn, DM (2001) Prolog knowledge base supplies embedded and web remote control: intelligence for microscopes. PC -AI Magazine, 15. pp. 25-29. ISSN 0894-0711

Caldwell, NHM and Breton, BC and Holburn, DM (2001) XpertEze: developing embedded intelligence for the scanning electron microscope. Microscopy and Microanalysis, 7. pp. 966-967. ISSN 1431-9276

Calladine, CR (2001) A shell-buckling paradox resolved. In: Advances in the Mechanics of Plates and Shells, The Avinoam Libai Anniversary Volume. Solid Mechanics and its Applications . Kluwer Academic Publishers, Netherlands, pp. 119-134.

Calladine, CR and Sharff, A and Luisi, BF (2001) How to untwist an a-helix: structural principles of an a-helical barrel. Journal of Molecular Biology, 305. pp. 603-618. ISSN 0022-2836

Campos, CMO and Guimaraes, GB and Burgoyne, CJ (2001) Rotation capacity of beams prestressed with synthetic external tendons. In: The 5th International Conference on Fibre-Reinforced Plastics for Reinforced Concrete Structures, FRPRCS-5, Cambridge, 16-18 July 2001 (vol.2), 2001-7-16 to 2001-7-18, Cambridge, UK pp. 711-720..

Canez, LE and Platts, KW and Probert, DR (2001) Make-or-Buy: a practical guide to industrial sourcing decisions. University of Cambridge, Cambridge, UK, -.

Canillas, A and Polo, MC and Andujar, JL and Sancho, J and Bosch, S and Robertson, J and Milne, WI (2001) Spectroscopic ellipsometric study of tetrahedral amorphous carbon films: optical properties and modelling. Diamond and Related Materials, 10. pp. 1132-1136. ISSN 0925-9635

Cant, RS (2001) S. B. Pope, Turbulent Flows, Cambridge University Press, Cambridge, U.K. Combustion and Flame, 125. pp. 1361-1362. ISSN 0010-2180

Cant, RS and Dawes, WN and Savill, AM (2001) Combustion instability mechanisms in a lean premixed gas turbine combustor. In: 2nd Joint Meeting of the U.S. Sections of the Combustion Institute, 2001-3-25 to 2001-3-28, Oakland Marriott City Center Hotel, Oakland, California.

Cardoso, C and Clarkson, PJ and Harrison, LJ and Langdon, PM and Keates, S (2001) Assessing the accessibility of everyday products. In: International Conference on Inclusive Design and Communications (INCLUDE 2001), 2001-4-18 to 2001-4-20, London, UK 56-..

Cardoso, C and Keates, S and Clarkson, PJ (2001) Results of a workshop on assessing accessibility of everyday products. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Cardwell, DA and Kambara, M and Babu, NH and Smith, PJ and Shi, Y (2001) Fabrication of large grain Nd-Ba-Cu-O by self-seeded melt growth. IEEE Transactions on Applied Superconductivity, 11. pp. 3712-3715. ISSN 1051-8223

Cardwell, DA and Kambara, M and Babu, NH and Smith, PJ and Shi, Y (2001) Fabrication of large grain Nd-Ba-Cu-O by self-seeded melt growth. In: UNSPECIFIED pp. 3712-3715..

Carmo, B and Gee, A and Prager, R and Berman, L (2001) Speckle detection for 3D ultrasound.

Carmo, B and Gee, A and Prager, R and Berman, L (2001) Speckle detection for 3D ultrasound. In: Ultrasonics International, 2001-7- to --, Delft, Netherlands.

Catney, SF and Lynch, RJ (2001) Experimental investigations of air sparging to control contaminated groundwater. Proceedings of ICE: Geotechnical Engineering, 149. pp. 253-258. ISSN 1353-2618

Caton, F and Britter, RE and Dalziel, S (2001) Flow field, dispersion and transfer in a street canyon: a process study. In: 3rd International Conference on Urban Air Quality: Measurements Modeling and Management, 2001-3-19 to 2001-3-23, Loutraki, Greece -..

Cerasi, P and Ladva, HK and Bradbury, AJ and M-I, LLC and Soga, K (2001) Measurement of the Mechanical Properties of Filtercakes. In: UNSPECIFIED pp. 251-262..

Cerasi, P and Soga, K (2001) Failure models of drilling fluid filter cake. Geotechnique, 51. pp. 777-786. ISSN 0016-8505

Cerasi, P and ladva, HK and Bradbury, AJ and Soga, K (2001) Measurement of the mechanical properties of filtercakes. In: SPE European Formation Damage Conference, 2001-5-21 to 2001-5-22, The Hague, The Netherlands 68948-..

Chai, YJ and Khrushchev, IH and Penty, RV and White, IH (2001) Quality enhancement of a WDM signal using dispersion imbalanced loop mirror. In: Optical Fiber Communication Conference and Exhibit, 2001, OFC 2001, 2001-3- to --, Anaheim, CA, USA.

Chai, YJ and Khrushchev, IY and Penty, RV and White, IH (2001) Quality enhancement of a WDM signal using dispersion-imbalanced loop mirror. Conference on Optical Fiber Communication, Technical Digest Series, 54. WI4/1-WI4/3.

Chai, YJ and Penty, RV and White, IH (2001) Interferometric noise suppression for WDM applications using a dispersion-imbalanced loop mirror. In: Conference on Lasers and Electro-Optics, CLEO 01, 2001-5-6 to 2001-5-11, Baltimore, MD, USA pp. 381-382..

Chakrabarti, A (2001) Sharing in design: categories, importance and issues. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 563-570..

Chakrabarti, A (2001) Towards hybrid methods for synthesis. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 379-386..

Chakrabarti, A and Bligh, TP (2001) A scheme for functional reasoning in conceptual design. Design Studies, 22. pp. 493-517. ISSN 0142-694X

Chakrabarti, A and Regno, R (2001) A new approach to structure sharing. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 155-162..

Chaluvadi, VSP and Kalfas, AI and Banieghbal, MR and Hodson, HP and Denton, JD (2001) Blade row interaction in a high pressure turbine. AIAA Journal of Propulsion and Power, 17. pp. 892-901. ISSN 0748-4658

Chan, MSM and Lynch, RJ and Ilett, DJ (2001) Use of cation-selective membrane and acid addition for pH control in two-dimensional electrokinetic remediation of copper. In: EREM 2001, 3rd Symposium on Electrokinetic Remediation, 2001-- to -- 33.1-33.12..

Chang, M and Parks, GT and Lewins, JD (2001) Estimation of system reliability by variationally processed Monte Carlo simulation. In: Recent Advances in Reliability and Quality Engineering. Series on Quality, Reliability and Engineering Statistics, 2 . World Scientific, River Edge, NJ, USA, pp. 93-122.

Chen, B and Shi, Y (2001) Generating and appropriating value: the case of aerospace systems integrators. In: The 6th Research Symposium on International Manufacturing: Global Integration, 2001-9-9 to 2001-9-11 pp. 24-43..

Chen, C and Fleck, NA and Ashby, MF (2001) Numerical predictions of the creep response of sandwich beams with a metallic foam core. In: Metfoam 2001: The International Conference on Cellular Metals and Metal Foaming Technology, 2001-6- to --, Bremen, Germany pp. 369-374..

Chen, C and Fleck, NA and Lu, TJ (2001) Mode I crack growth resistance of metallic foams. Journal of the Mechanics and Physics of Solids, 49. pp. 231-259. ISSN 0022-5096

Chen, C and Fleck, NA and Lu, TJ (2001) The mode I crack growth resistance of metallic foams. Journal of the Mechanics and Physics of Solids, 49. pp. 231-259. ISSN 0022-5096

Chen, C and Harte, A-M and Fleck, NA (2001) Plastic collapse of sandwich beams with a metallic foam core. International Journal of Mechanical Sciences, 43. pp. 1483-1506. ISSN 0020-7403

Chen, C and Harte, AM and Fleck, NA (2001) The plastic collapse of sandwich beams with a metallic foam core. International Journal of Mechanical Sciences, 43. pp. 1483-1506. ISSN 0020-7403

Chen, C and Lu, TJ and Fleck, NA (2001) Effect of inclusions and holes on the stiffness and strength of honeycombs. International Journal of Mechanical Sciences, 43. pp. 487-504. ISSN 0020-7403

Chen, C and Lu, TJ and Fleck, NA (2001) Effect of inclusions and holes on the stiffness and strength of honeycombs. International Journal of Mechanical Sciences, 43. pp. 487-504. ISSN 0020-7403

Chen, CH and Travis, ARL (2001) Strategies for 3D video with wide fields-of-view. IEE Proceedings: Optoelectronics, 148. pp. 85-90. ISSN 1350-2433

Cheng, YP and White, DJ and Bowman, ET and Bolton, MD and Soga, K (2001) The observation of soil microstructure under load. In: 4th International Conference on Micromechanics of Granular Media Powders and Grains, 2001-5-21 to 2001-5-25, Sendai, Japan pp. 69-72..

Chhowalla, M and Amaratunga, GAJ (2001) Strongly adhering and thick highly tetrahedral amorphous carbon (ta-C) thin films via surface modification by implantation. J MATER RES, 16. pp. 5-8. ISSN 0884-2914

Chhowalla, M and Ducati, C and Rupesinghe, NL and Teo, KBK and Amaratunga, GAJ (2001) Field emission from short and stubby vertically aligned carbon nanotubes. APPL PHYS LETT, 79. pp. 2079-2081. ISSN 0003-6951

Chhowalla, M and Ducati, C and Rupesinghe, NL and Teo, KBK and Amaratunga, GAJ (2001) Field emission from short and stubby vertically aligned carbon nanotubes. Applied Physics Letters, 79. pp. 2079-2081. ISSN 0003-6951

Chhowalla, M and Teo, KBK and Ducati, C and Rupesinghe, NL and Amaratunga, GAJ and Ferrari, AC and Roy, D and Robertson, J and Milne, WI (2001) Growth process conditions of vertically aligned carbon nanotubes using plasma enhanced chemical vapor deposition. J APPL PHYS, 90. pp. 5308-5317. ISSN 0021-8979

Chhowalla, M and Teo, KBK and Ducati, C and Rupesinghe, NL and Amaratunga, GAJ and Ferrari, AC and Roy, D and Robertson, J and Milne, WI (2001) Growth process conditions of vertically aligned carbon nanotubes using plasma enhanced chemical vapor deposition. Journal of Applied Physics, 90. pp. 5308-5317. ISSN 0021-8979

Childs, AM and Patterson, RB and MacKay, DJC (2001) Exact sampling from nonattractive distributions using summary states. PHYS REV E, 6303. -. ISSN 1063-651X

Chitambira, B and Al Tabbaa, A and Evans, CW (2001) Laboratory and full-scale behaviour of soil-mixed columns. In: The 3rd BGA Geoenvironmental Engineering Conference: Geoenvironmental Impact Management, 2001-9- to -- pp. 183-188..

Choi, SH and Song, BG and Kang, KJ and Fleck, NA (2001) Fracture of a ductile layer constrained by stiff substrates. Fatigue and Fracture of Engineering Materials and Structures, 24. pp. 1-13. ISSN 8756-758X

Chokshi, NN and Matson, JB and McFarlane, DC (2001) Distributed coordination of steel-making operations for reduced production stoppages. In: The 2nd Management and Control of Production and Logistics Conference (MCPL 2000), 2000-7- to -- -..

Chokshi, NN and McFarlane, DC (2001) Rationales for holonic manufacturing systems in chemical process industries. In: 2nd International Workshop on Industrial Applications of Holonic and Multi-Agent Systems (HoloMAS 2001), 2001-9-6 to --, Munich, Germany pp. 616-622..

Choudhary, R and Malkawi, A (2001) A methodology for micro-level building thermal analysis: combining CFD and experimental set-ups. Seventh International IBPSA Conference. pp. 1275-1282.

Christen, U and Vantine, KJ and Collings, N (2001) Event-based mean-value modeling of DI diesel engines for controller design. SAE Transactions, 110. pp. 1472-1482. ISSN 0096-736X

Chu, DP and McGregor, BM and Migliorato, P and Durkan, C and Welland, ME and Hasegawa, K and Shimoda, T (2001) Ohmic conductivity and activation energy of Pb1+y (Zr0.3Ti0.7)O3 thin films. In: The 1st International Semiconductor Technology Conference, 2001-5- to --, Shanghai, China pp. 416-421..

Chu, DP and McGregor, BM and Migliorato, P and Durkan, C and Welland, ME and Hasegawa, K and Shmioda, T (2001) Temperature dependence of the ohmic conductivity and activation energy of Pb1+y(Zr0.3Ti0.7)O3 thin films. Applied Physics Letters, 79. pp. 518-520. ISSN 0003-6951

Chu, DP and McGregor, BM and Migliorato, P and Wendler, E and Hasegawa, K and Shimoda, T (2001) Effects of excess Pb level on the grain growth speed and composition of Pb1+y (Zr0.3Ti0.7)O3 thin films. In: 10th International Meeting on Ferroelectricity (IMF-10), 2001-9- to --, Madrid, Spain.

Chung, YM and Tucker, PG and Luo, KH (2001) Large eddy simulation of complex internal flows. In: The Direct and Large-Eddy Simulation IV on Ercoftac Series, 2001-7-18 to 2001-7-21 pp. 373-380..

Cipolla, R (2001) Real-time visual tracking and 3D model acquisition. In: Conference on New Frontiers of Intelligent Robotics, 2001-7- to --, Tokyo, Japan.

Cipolla, R and Wong, K (2001) Reconstruction of sculpture from uncalibrated image profiles. In: The International Conference on Image Processing (ICIP'01), 2001-10- to --, Thessaloniki, Greece pp. 570-573..

Cirak, F and Ortiz, M (2001) Fully C1-conforming subdivision elements for finite deformation thin-shell analysis. International Journal for Numerical Methods in Engineering, 51. pp. 813-834. ISSN 0029-5981

Clarkson, PJ and Harrison, LJ and Keates, S (2001) How to assess whether new technology is necessarily better technology. In: International Conference on Inclusive Design and Communications (INCLUDE 2001), 2001-4-18 to 2001-4-20, London, UK 94-..

Clarkson, PJ and Keates, S (2001) Towards an inclusive design approach - a case study of exclusion. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 355-362..

Clarkson, PJ and Keates, S (2001) A practical inclusive design approach. In: International Conference on Inclusive Design and Communications (INCLUDE 2001), 2001-4-18 to 2001-4-20, London, UK pp. 72-73..

Clarkson, PJ and Melo, AF and Eckert, CM (2001) Visualization techniques to assist design process planning. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 321-327..

Clarkson, PJ and Simons, CS and Eckert, CM (2001) Change prediction for product redesign. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 577-584..

Clarkson, PJ and Simons, CS and Eckert, CM (2001) Predicting change propagation in complex design. In: 2001 ASME Design Engineering Technical Conferences (DETC'01), 2001-9-9 to 2001-9-12, Pittsburgh, PA, US pp. 155-164..

Cleaver, RP and Britter, RE (2001) A workbook approach to estimating the flammable volume produced by a gas release. FABIG Newsletter, 30.

Cole, DJ (2001) Fundamental issues in suspension design for heavy road vehicles. Vehicle System Dynamics, 35. pp. 319-360. ISSN 0042-3114

Cole, DJ (2001) Fundamental issues in suspension design for heavy road vehicles. Vehicle System Dynamics, 35. pp. 319-360. ISSN 0042-3114

Cole, DJ and Khoo, YH (2001) Prediction of vehicle stability using a `back to back' tyre test method. International Journal of Vehicle Design, 26. pp. 573-582. ISSN 0143-3369

Cole, DJ and Khoo, YH (2001) Prediction of vehicle stability using a `back to back' tyre test method. International Journal of Vehicle Design, 26. pp. 573-582. ISSN 0143-3369

Coles, HJ and Musgrave, B and Coles, MJ and Willmott, J (2001) The effect of the molecular structure on flexoelectric coupling in the chiral nematic phase. JOURNAL OF MATERIALS CHEMISTRY, 11. pp. 2709-2716. ISSN 0959-9428

Collings, N and Mias, A and Chittick, RC and Wilkinson, TD and Travis, ARL and Crossland, WA (2001) Optically addressed spatial light modulators and their applications. In: 5th Mediteranian Workshop and Topical Meeting on Novel Optical Materials and Applications, 2001-5- to --, NOMA, Cetraro, Italy.

Cooke, KM and Di Sabatino, S and Britter, RE and Caton, F and Simmonds, PG and Nickless, G (2001) Tracers and dispersion of gaseous pollutants in urban areas. Technical Report. University of Cambridge, Department of Engineering, Cambridge, UK.

Coombs, TA and Campbell, AM and Murphy, A and Emmens, M (2001) A fast algorithm for calculating the critical state in superconductors. Compel: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 20. pp. 240-252. ISSN 0332-1649

Cooper, AJ and Peake, N (2001) Propagation of unsteady disturbances in a slowly varying duct with mean swirling flow. Journal of Fluid Mechanics, 445. pp. 201-234. ISSN 0022-1120

Cooper, AJ and Peake, N (2001) Propagation of unsteady disturbances in a slowly varying duct with mean swirling flow. J FLUID MECH, 445. pp. 207-234. ISSN 0022-1120

Cooper, AJ and Peake, N (2001) Wave propagation in a slowly-varying duct with mean vortical swirling flow. 7th AIAA/CEAS Aeroacoustics Conference and Exhibit.

Cornelius, SJ and Collings, N and Glover, K (2001) The role of oxygen storage in NO conversion in automotive catalysts. Topics in Catalysis, 16/17. pp. 57-62. ISSN 1022-5528

Cornelius, SJ and Collings, N and Glover, K (2001) The role of oxygen storage in NO Conversion in automotive catalysts. Topics in Catalysis, 16-17. pp. 57-62. ISSN 1022-5528

Cornelius, SJ and Collings, N and Glover, K (2001) The role of oxygen storage in NO conversion in automotive catalysts. In: UNSPECIFIED pp. 57-62..

Cornelius, SJ and Davison, DE and Collings, N and Glover, K (2001) Air-to-fuel ratio modulation experiments over a Pd/Rh three-way catalyst. In: The SAE International Fall Fuels and Lubricants Meeting: Sessions on General Emissions and Gasoline Emission Control Systems, 2001-9- to --, San Antonio, TX, US pp. 123-134..

Correia, A and Welland, ME and Serena, PA (2001) Preface. Nanotechnology, 12. ISSN 0957-4484

Cosh, A and Cox, M and Hughes, A (2001) Evaluation of the golden key package component of the Small Business Initiative. Technical Report. British Bankers Association Enterprises Ltd, London.

Cosh, A and Guest, P (2001) The long-run performance of hostile takeovers: U.K. evidence. ESRC Centre for Business Research Working Papers.

Cosh, A and Hughes, A and Guest, P (2001) Managerial discretion and takeover performance. ESRC Centre for Business Research Working Papers.

Couliard, PY and Langley, RS (2001) Nonlinear dynamics of deep-water moorings. In: 20th International Conference on Offshore Mechanics and Arctic Engineering; OMAE 2001; Vol. 1: Offshore Technology, 2001-6- to --, Rio de Janeiro, Brazil pp. 47-56..

Court, RS and Sutcliffe, MPF and Tavakoli, SM (2001) Ageing of adhesively bonded joints-fracture and failure analysis using video imaging techniques. International Journal of Adhesion and Adhesives, 21. pp. 455-463. ISSN 0143-7496

Cowin, MA and Varazza, R and Morgan, CN and Penty, RV and White, IH and McDonagh, AM and Bayly, S and Riley, J and Ward, MD and McCleverty, JA (2001) Low power electrochromic variable optical attenuator with 50dB attenuation range. In: Optical Fiber Communication Conference and Exhibit, 2001, OFC 2001, 2001-3- to --, Anaheim, CA, USA WR6.1-WR6.3..

Coy, J and Keates, S and Clarkson, PJ (2001) Improving accessibility in the workplace: manual data entry in video coding. In: IMechE Mail Technology Evolution to E-Revolution, 2001-4-24 to 2001-4-25, Brighton, UK pp. 201-210..

Coy, J and Keates, S and Harrison, LJ and Clarkson, PJ and Robinson, P (2001) Design for accessibility: the personal information point. In: IMechE Mail Technology: Evolution to E-Revolution, 2001-4-24 to 2001-4-25, Brighton, UK pp. 159-168..

Creighton, CJ and Sutcliffe, MPF and Clyne, TW (2001) A multiple field image analysis procedure for characterisation of fibre alignment in composites. Composites Part A: Applied Science and Manufacturing, 32. pp. 221-229. ISSN 1359-835X

Creighton, CJ and Sutcliffe, MPF and Clyne, TW (2001) A multiple field image analysis procedure for characterisation of fibre alignment in composites. COMPOS PART A-APPL S, 32. pp. 221-229. ISSN 1359-835X

Crossland, WA and Wilkinson, TD and Manolis, IG and Redmond, MM and Davey, AB (2001) Telecommunications applications of LCOS devices. In: 9th International Topical Meeting on Optics of Liquid Crystals, 2001-9-30 to 2001-10-1, Sorrento, Italy pp. 1-14..

Crossland, WA and Wilkinson, TD and Travis, ARL and Eshraghian, K (2001) Next generation microdisplays and applications. In: SID (Society for Information Display) UK/Ireland Annual General Meeting (AGM), 2001-5- to --, Knebworth, Hertfordshire, UK.

Cryan, MJ and Carddock, IJ and Penty, RV and White, IH and Railton, CJ (2001) Electromagnetic compatibility analysis of multilayer PCBs Using a hybrid finite difference time domain (FDTD) - partial element equivalent circuit (PEEC) method. In: 31st European Microwave Conference, 2001-9-24 to 2001-9-28, London, UK pp. 445-448..

Cryan, MJ and Craddock, IJ and Penty, RV and Railton, CJ and White, IH (2001) Analysis of ridge waveguides loaded with 2D lattice structures using the finite difference time domain (FDTD) method. In: European Conference on Integrated Optics (ECIO 2001), 2001-4- to --, Paderborn, Germany.

Csanyi, G (2001) New ab initio formulation of electron correlation and spin resonance. PhD thesis, UNSPECIFIED.

Cui, JB and Robertson, J and Milne, WI (2001) Field emission site densities of nanostructured carbon. Materials Research Society Symposium - Proceedings, 675. W6.5.1-W6.5.5. ISSN 0272-9172

Cui, JB and Robertson, J and Milne, WI (2001) Field emission site densities of nanostructured carbon films deposited by a cathodic arc. Journal of Applied Physics, 89. pp. 5707-5711. ISSN 0021-8979

Cui, JB and Robertson, J and Milne, WI (2001) Improved electron emission from carbon film using a resistive layer. Journal of Applied Physics, 89. pp. 3490-3493. ISSN 0021-8979

Cui, JB and Robertson, J and Milne, WI (2001) The effect of film resistance on electron field emission from amorphous carbon films. Diamond and Related Materials, 10. pp. 868-872. ISSN 0925-9635

D

D, L and Yuliang, L and C, J and Yusheng, L (2001) Concentration field in near wakes. Journal of Tsinghua University, 41. pp. 117-120. ISSN 1000-0054

Dahoe, AE and Cant, RS and Pegg, MJ and Scarlett, B (2001) On the transient flow in the 20-liter explosion sphere. Journal of Loss Prevention in the Process Industries, 14. pp. 475-487. ISSN 0950-4230

Dahoe, AE and Cant, RS and Scarlett, B (2001) On the decay of turbulence in the 20-litre explosion sphere. Flow Turbulence and Combustion, 67. pp. 159-184. ISSN 1386-6184

Dambach, R and Hodson, HP (2001) Tip leakage flow in a radial inflow turbine with varying gap height. AIAA Journal of Propulsion and Power, 17. pp. 644-650. ISSN 0748-4658

Damgaard, JS and Palmer, AC (2001) Pipeline stability on a mobile and liquefied seabed: a discussion of magnitudes and engineering implications. In: OMAE 2001 : the 20th International Conference on Offshore Mechanics and Arctic Engineering, Rio de Janeiro, Brazil, 2001-- to -- pp. 195-204..

Date, P and Vinnicombe, G (2001) Measuring distance between systems under bounded power excitation. In: UNSPECIFIED pp. 1420-1425..

Date, P and Vinnicombe, G (2001) Measuring distance between systems under bounded power excitation. In: The 2001 American Control Conference, 2001-6- to --.

Davey, MC and MacKay, DJC (2001) Reliable communication over channels with insertions, deletions, and substitutions. In: UNSPECIFIED pp. 687-698..

Davidson, PA (2001) Aluminum (aluminium): approaching the new millennium. In: Mechanics for a New Millennium: the 20th International Congress of Theoretical and Applied Mechanics (ICTAM), 2000-8- to --, Chicago, Illinois, USA pp. 85-98..

Davidson, PA (2001) An Introduction to Magnetohydrodynamics. Cambridge texts in applied mathematics . Cambridge University Press, Cambridge, UK, -.

Dawes, WN and Dhanasekaran, PC and Demargne, AAJ and Kellar, WP and Savill, AM (2001) Reducing bottlenecks in the CAD-to-mesh-to-solution cycle time to allow CFD to participate in design. Transactions of the ASME Journal of Turbomachinery, 123. pp. 552-557. ISSN 0889-504X

De Borst, R and Askes, H and Gutierrez, MA and Wells, GN (2001) Computational aspects of material instabilities. In: 6th Greek National Congress on Mechanics, 2001-7-19 to 2001-7-21, Thessaloniki, Greece pp. 1-8..

De Borst, R and Wells, GN and Sluys, LJ (2001) Some observations on embedded discontinuity models. Engineering Computations, 18. pp. 241-254. ISSN 0264-4401

De Gaudenzi, R and Guillén i Fàbregas, A and Martinez, A and Ponticelli, A (2001) High power and spectral efficiency coded digital modulation schemes for nonlinear satellite channels. In: DSP 2001: 7th International Workshop on Digital Signal Processing Techniques for Space Communications, 2001-10-1 to 2001-10-3, Sesimbra, Portugal.

De Hondt, P and Perkins, SP and Coles, HJ (2001) Perylene-based fluorescent liquid crystal dye guest-host mixtures. Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals, 366. pp. 263-270. ISSN 1058-725X

De Mello, JDB and Binder, R and Klein, AN and Hutchings, IM (2001) Effect of compaction pressure and powder grade on microstructure and hardness of steam oxidised sintered iron. Powder Metallurgy, 44. pp. 53-61. ISSN 0032-5899

De Mello, JDB and Hutchings, IM (2001) Effect of processing parameters on the surface durability of steam-oxidized sintered iron. Wear, 250. pp. 435-448. ISSN 0043-1648

De Mello, JDB and Hutchings, IM (2001) Surface durability of steam-oxidized sintered iron: effect of surface topography. In: Tribology 2001. Austrian Tribology Society, Vienna, pp. 105-112.

Demargne, AAJ and Longley, JP (2001) Cavity and protrusion effects in a single-stage compressor. In: ASME Turbo Expo — Land, Sea and Air, Gas Turbine Conference, 2001-6-4 to 2001-6-7, New Orleans, Louisiana, USA.

Dempsey, JP and Palmer, AC and Sodhi, DS (2001) High pressure zone formation during compressive ice failure. Engineering Fracture Mechanics, 68. pp. 1961-1974. ISSN 0013-7944

Deshpande, VS and Ashby, MF and Fleck, NA (2001) Foam topology: bending versus stretching dominated architectures. International Journal of Solids and Structures, 49. pp. 1035-1040. ISSN 1359-6454

Deshpande, VS and Cleveringa, HHM and Van der Giessen, E and Needleman, A (2001) A discrete dislocation analysis of fatigue crack growth. Journal De Physique. IV : JP, 11. Pr569-Pr575. ISSN 1155-4339

Deshpande, VS and Cleveringa, HMM and van der Giessen, E and Needleman, A (2001) A discrete dislocation analysis of fatigue crack growth. Journal de Physique IV, 5. pp. 69-75. ISSN 1155-4339

Deshpande, VS and Fleck, NA (2001) Collapse of truss core sandwich beams in 3-point bending. International Journal of Solids and Structures, 38. pp. 6275-6305. ISSN 0020-7683

Deshpande, VS and Fleck, NA (2001) Effective properties of the octet-truss lattice material. Journal of the Mechanics and Physics of Solids, 49. pp. 1747-1769. ISSN 0022-5096

Deshpande, VS and Fleck, NA (2001) Multi-axial yield behaviour of polymer foams. Acta Materialia, 49. pp. 1859-1866. ISSN 1359-6454

Deshpande, VS and Needleman, A and van der Giessen, E (2001) Dislocation dynamics is chaotic. Scripta Materialia, 45. pp. 1047-1053. ISSN 1359-6462

Deshpande, VS and Needleman, A and van der Giessen, E (2001) A discrete dislocation analysis of crack growth. In: 10th International Conference on Fracture, ICF' 01, 2001-12-2 to 2001-12-6, Honolulu, Hawaii, USA.

Deshpande, VS and Needleman, A and van der Giessen, E (2001) A discrete dislocation analysis of near-threshold fatigue crack growth. Acta Materialia, 49. pp. 3189-3203. ISSN 1359-6454

Dick, A and Torr, P and Ruffle, S and Cipolla, R (2001) Combining single view recognition and multiple view stereo for architectural scenes. In: The 8th IEEE International Conference on Computer Vision (ICCV'01), -- to --.

Dick, A and Torr, P and Ruffle, S and Cipolla, R (2001) Combining single view recognition and multiple view stereo for architectural scenes. In: The 8th IEEE International Conference on Computer Vision (ICCV'01), 2001-7- to --, Vancouver, Cananda pp. 268-274..

Dietrich, R and Pellegrino, S (2001) Feasibility study of a deployable mesh reflector: phase 2. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Dobrescu, D and Rusu, A and Udrea, F and Dobrescu, L (2001) Image force effect on forward characteristic of a rectifier metal-semiconductor contact. In: The 24th International Semiconductor Conference; CAS 2001, 2001-10- to --, Sinaia, Romania pp. 429-432..

Druilhe, C and Garnsey, E (2001) Academic spin-off ventures: a resource-opportunity approach. In: New technology-based firms in the new millennium. Pergamon, Oxford.

Drummond, TW and Cipolla, R (2001) Real-time tracking of highly articulated structures in the presence of noisy measurements. In: The 8th IEEE International Conference on Computer Vision (ICCV'02), 2001-7- to --, Vancouver, Cananda pp. 315-320..

Dupere, IDJ and Dawes, WN and Tester, BJ and Wilson, AG (2001) Predictions of multiple tone noise and distortion noise in a transonic fan using unsteady CFD. In: 4th European Conference on Turbomachinery, 2001-3-20 to 2001-3-23, Florence, Italy pp. 435-442..

Dupere, IDJ and Dowling, AP (2001) The absorption of sound near abrupt axisymmetric area expansions. Journal of Sound and Vibration, 239. pp. 709-730. ISSN 0022-460X

Durrell, J (2001) Critical current anisotropy in high temperature superconductors. PhD thesis, UNSPECIFIED.

de Freitas, JFG and Andrieu, C and Hojen Sorensen, P and Niranjan, M and Gee, AH (2001) Sequential Monte Carlo methods for neural networks. In: Sequential Monte Carlo Methods in Practice. Springer-Verlag, New York, pp. 359-379.

de Rivaz, P and Kingsbury, NG (2001) Bayesian image deconvolution and denoising using complex wavelets. In: The IEEE International Conference on Image Processing (ICIP'01), 2001-10- to -- pp. 273-276..

de Sa, VR and MacKay, DJC (2001) Model fitting as an aid to bridge balancing in neuronal recording. In: UNSPECIFIED pp. 1651-1656..

del Rey Chamorro, FM (2001) Understanding the use and retrieval of product and process knowledge.

E

E M A, M and M F, A (2001) Viability assessment: a case study of metal foams. In: Encyclopedia of Materials: Science and Technology. Elsevier Press, Amsterdam, The Netherlands.

Earl, CF and Eckert, CM and Johnson, J (2001) Complexity in planning design processes. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 149-156..

Earl, CF and Eckert, CM and Johnson, JH (2001) Complexity of planning in design. In: 2001 ASME Design Engineering Technical Conferences (DETC'01), 2001-9-9 to 2001-9-12, Pittsburgh, PA, US pp. 147-154..

Eckert, CM (2001) The communication bottleneck in knitwear design: analysis and computing solutions. Computer Supported Cooperative Work, 10. pp. 29-74. ISSN 0925-9724

Eckert, CM and Clarkson, PJ and Stacey, MK (2001) Information flow in engineering companies: problems and their causes. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 43-50..

Eckert, CM and Demaid, A (2001) Classifying design and design management in seasonal industries. International Journal of Innovation Management, 5. pp. 401-425. ISSN 1363-9196

Eckert, CM and Stacey, MK (2001) Designing in the context of fashion - Designing the fashion context. In: Designing the Context Symposium, 2001-12-18 to 2001-12-20, Delft, The Netherlands pp. 113-129..

Eckert, CM and Stacey, MK (2001) Dimensions of communication in design. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 473-480..

Eckert, CM and Stacey, MK (2001) Sources of inspiration in industrial practice: the case of knitwear design. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Eckert, CM and Zanker, W and Clarkson, PJ (2001) Aspects for a better understanding of changes. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 147-154..

Elsner, W and Vilmin, S and Dawes, WN and Hodson, HP and Savill, AM (2001) Modelling of unsteady boundary layer on a blade profile with unNEWT PUIM code. In: Proceedings of CFD for Turbomachinery Applications (CFDTurbo2001), 2001-9- to --, Gdansk, Poland 236-..

Erlich, M and Mills, JF (2001) A critical review of new product development performance research. In: International Working Conference on Strategic Manufacturing, 2001-8-19 to --, Aalborg, Denmark.

Evans, AG and Hutchinson, JW and Fleck, NA and Ashby, MF and Wadley, HN (2001) The topological design of multifunctional cellular metals. Progress in Materials Science, 46. pp. 209-327. ISSN 0079-6425

Evans, AG and Hutchinson, JW and Fleck, NA and Ashby, MF and Wadley, HN (2001) The topological design of multifunctional cellular metals. Progress in Materials Science, 46. pp. 309-327. ISSN 0079-6425

Evesque, S and Aimaswamy, AM and Dowling, AP (2001) Adaptive combustion instability control with saturation. 37th Joint Propulsion Conference and Exhibit.

Evesque, S and Dowling, AP (2001) LMS algorithm for adaptive control of combustion oscillations. Combustion Science and Technology, 164. pp. 65-93. ISSN 0010-2202

Evesque, S and Dowling, AP and Annaswamy, AM (2001) Adaptive combustion instability control with saturation. In: 37th AIAA/ASME/SAE/SAE/ASEE Joint Propulsion Conference, 2001-7- to --, Salt Lake City, Utah, USA.

F

Farrukh, CJP and Phaal, R and Probert, DR (2001) Industrial practice in technology planning: implications for a useful tool catalogue for technology management. In: Portland International Conference on Management of Engineering and Technology (PICMET 2001), 2001-7-29 to 2001-8-2, Portland, OR, US.

Feih, S and Shercliff, HR and McGrath, G (2001) Quality assesment and design guidelines for adhesively bonded peel-joint geometries in composite aerospace structures. In: 6th International Conference on Deformation and Fracture of Composites (DFC6), 2001-4- to --, UMIST, Manchester, UK.

Feih, S and Shercliff, HR and McGrath, G (2001) Simplifying finite element design verification of adhesively bonded composite joints by customising MSC/PATRAN and ABAQUS. In: Proceedings of the Conference ICCE-8, 2001-7- to --, Tenerife, Spain.

Fenner, RA (2001) Can urban drainage be sustainable without improving maintenance? In: 1st National Conference on Sustainable Urban Drainage, 2001-6-18 to 2001-6-19, Coventry.

Fenner, RA (2001) Sewer asset condition and performance. In: Meeting of EPSRC network programme SEWNET, 2001-5-8 to --, Derby, UK.

Ferrari, AC (2001) A model to interpret the Raman spectra of disordered, amorphous, and nanostructured carbons. Materials Research Society Symposium Proceedings, 675. p. W11.5-. ISSN 1526-2421

Ferrari, AC and Robertson, J (2001) Origin of the 1150-cm-1 Raman mode in nanocrystalline diamond. Physical Review B: Condensed Matter and Materials Physics, 63. 121405-. ISSN 1098-0121

Finlay, TCR and White, DJ and Bolton, MD and Nagayama, T (2001) Press-in piling: The installation of steel tubular piles with and without driving shoes. In: 5th International Conference on Deep Foundation Practice, 2001-4- to --, Singapore pp. 199-208..

Fitzgerald, WJ (2001) Markov chain Monte Carlo methods with applications to signal processing. SIGNAL PROCESS, 81. pp. 3-18. ISSN 0165-1684

Flanagan, JR and King, S and Wolpert, DM and Johansson, RS (2001) Sensorimotor prediction and memory in object manipulation. Canadian Journal of Experimental Psychology, 55. pp. 87-95. ISSN 1196-1961

Fleck, NA (2001) Multi-axial strength of metallic foams and lattice materials. Journal of the JSMS: Materials Science for the 21st Century, A. pp. 336-340.

Fleck, NA and Chen, C and Ashby, MF (2001) Size effects in the fracture of metallic foams. In: Metfoam 2001: The International Conference on Cellular Metals and Metal Foaming Technology, 2001-6- to --, Bremen, Germany pp. 293-298..

Fleck, NA and Hutchinson, JW (2001) A reformulation of strain gradient plasticity. Journal of the Mechanics and Physics of Solids, 49. pp. 2245-2271. ISSN 0022-5096

Fleck, NA and Liu, D (2001) Microbuckle initiation from a patch of large amplitude fibre waviness in a composite under compression and bending. European Journal of Mechanics, Series A; Solids, 20. pp. 23-38. ISSN 0997-7538

Fleck, NA and Olurin, OB (2001) The effect of hole size upon the strength of metallic and polymeric foams. Journal of the Mechanics and Physics of Solids, 49. pp. 2015-2030. ISSN 0022-5096

Fleck, NA and Olurin, OB and Chen, C and Ashby, MF (2001) The effect of hole size upon the strength of metallic and polymeric foams. Journal of the Mechanics and Physics of Solids, 49. pp. 2015-2030. ISSN 0022-5096

Flewitt, AJ and Dyson, AP and Robertson, J and Milne, WI (2001) Low temperature growth of silicon nitride by electron cyclotron resonance plasma enhanced chemical vapour deposition. Thin Solid Films, 383. pp. 172-177. ISSN 0040-6090

Fong, W and Godsill, SJ (2001) Monte Carlo smoothing with application to audio signal enhancement. In: The 11th International Conference on Statistical Signal Processing, 2001-8- to -- pp. 18-21..

Fong, W and Godsill, SJ (2001) Monte Carlo smoothing with application to audio signal enhancement. In: The 11th IEEE Signal Processing Workshop on Statistical Signal Processing, 2001-8- to --, Singapore pp. 18-21..

Fong, WNW and Godsill, SJ (2001) Monte Carlo smoothing for non-linearly distorted signals. In: The 26th International Conference on International Conference on Acoustics, Speech, and Signal Processing (ICASSP), 2001-5- to --, Salt Lake City, UT, US pp. 3997-4000..

Ford, DW and Kay, JM (2001) Planning boards - is there a future? In: 18th International Manufacturing Conference, 2001-9-5 to 2001-9-7, Dublin, Ireland.

Ford, RG and Collings, N (2001) The dynamic effect of residual gas temperature on combustion torque at idle. SAE Transactions, 110. pp. 2263-2269. ISSN 0096-736X

Ford, RG and Glover, K (2001) Spark ignition engine idle speed control using a novel framework and enabling control of the tradeoff between fuel consumption and load rejection capability. Vehicle System Dynamics, 36. pp. 225-251. ISSN 0042-3114

Foundoukas, N and Madabhushi, SPG (2001) Construction process induced vibrations on underground structures. In: 4th National Conference on Geotechnical and Geo­envi­ronmental Engineering, -- to --, Athens, Greece.

Fraser, P and Horsfall, T and Gregory, M (2001) Taken on trust: the role of contracts in product development collaborations involving small firms. In: EIASM Workshop on Trust Within and Between Organisations, 2001-11-29 to 2001-11-30, Amsterdam, Netherlands.

Fraser, P and Moultrie, J and Holdway, R (2001) Exploratory studies of a proposed Design Maturity Model. In: 8th International Product Development Management Conference, 2001-6-11 to 2001-6-12, University of Twente, Holland.

Fraser, P and Rose, C and Gregory, M (2001) Assessing co-development relationships. In: 8th International Product Development Management Conference, 2001-6-11 to 2001-6-12, University of Twente, Netherlands.

Frizelle, G (2001) Managing complexity in product development. In: First Joint IEEE/IEE Internet Conference, 2001-- to --, Online.

Frizelle, G and Suhov, YM (2001) An entropic measurement of queueing behaviour in a class of manufacturing operations. P ROY SOC LOND A MAT, 457. pp. 1579-1601. ISSN 1364-5021

Frizelle, GDM (2001) Managing complexity in product development. In: Internet Seminar sponsored by the Florida Institute of Technology, -- to --.

Frizelle, GDM and Suhov, YM (2001) An entropic measurement of queueing behaviour in a class of manufacturing operations. Proceedings of the Royal Society of London: Series A, 457. pp. 1579-1602. ISSN 1364-5021

Froelund, K and Schramm, J and Tian, T and Wong, V and Hochgreb, S (2001) Analysis of the piston ring/liner oil film development during warm-up for an SI engine. Transactions of the ASME Journal of Engineering for Gas Turbines and Power, 123. pp. 109-116. ISSN 0742-4795

Froelund, K and Schramm, J and Tian, T and Wong, V and Hochgreb, S (2001) Analysis of the piston ring/liner oil film development during warm-up for an SI engine. Transactions of the ASME Journal of Engineering for Gas Turbines and Power, 123. pp. 109-116. ISSN 0742-4795

G

Gage, SA and Hunt, GR and Linden, PF (2001) Top down ventilation and cooling. Journal of Architectural and Planning Research, 18. pp. 286-301. ISSN 0738-0895

Gales, MJF (2001) Acoustic factorisation. In: The IEEE Workshop on Automatic Speech Recognition and Understanding (ASRU 2001), 2001-12- to --, Madonna di Campiglio, Italy pp. 77-80..

Gales, MJF (2001) Adaptive training for robust ASR. In: The IEEE Workshop on Automatic Speech Recognition and Understanding (ASRU 2001), 2001-12- to --, Madonna di Campiglio, Italy pp. 15-20..

Gales, MJF (2001) Multiple-cluster adaptive training schemes. In: 26th International Conference on Acoustics, Speech, and Signal Processing, 2001-5- to --, Salt Lake City, UT, US pp. 361-364..

Gales, MJF (2001) Transformation streams and the HMM error model. Technical Report. Cambridge University, Cambridge, UK.

Gamage, S and Lasenby, J (2001) Inferring dynamical information from 3D position data using geometric algebra. In: The Conference on Applied Geometric Algebras in Computer Science and Engineering (AGACSE), 2001-7- to -- pp. 395-405..

Gandin, CA and Brechet, Y and Rappaz, M and Canova, G and Ashby, MF and Shercliff, HR (2001) Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys. In: 7th European Conference on Advanced Materials and Processes (Euromat 2001), 2001-6- to -- 259-..

Gardner, DM and Udrea, F and Ensell, G and Sheng, K and Popescu, AE and Amaratunga, GAJ and Milne, WI (2001) Failure mechanisms of SOI high-voltage LIGBTs and LDMOSes under unclamped inductive switching. In: The 13th IEEE International Symposium on Power Semiconductor Devices and ICs (ISPSD), 2001-6- to --, Osaka, Japan pp. 335-338..

Gardner, J and Covington, J and Udrea, F and Dogaru, T and Lu, C and Milne, WI (2001) SOI-based micro-hotplate microcalorimeter gas sensor with integrated BiCMOS transducer. In: The 15th European Conference on Solid-State Transducers; Transducers '01, 2001-6- to --, Munich, Germany pp. 1688-1691..

Garner, DM and Amaratunga, GAJ (2001) Analytic modelling of the thin-film field-emission triode. SOLID STATE ELECTRON, 45. pp. 879-886. ISSN 0038-1101

Garner, DM and Udrea, F and Lim, HT and Ensell, G and Popescu, AE and Sheng, K and Milne, WI (2001) Silicon-on-insulator power integrated circuits. Microelectronics Journal, 32. pp. 517-526. ISSN 0026-2692

Garnsey, E (2001) Knowledge based enterprise in a new economy. In: New economy: new entrepreneurs: entrepreneurship in the Netherlands. UNSPECIFIED.

Garnsey, E (2001) Theory of new venture growth inspired by Penrose. In: UNSPECIFIED.

Genc, AU and Glover, K and Ford, RG (2001) Nonlinear control of hydraulic actuators in variable cam timing engines. In: International Workshop on Modeling, Emissions and Control in Automotive Engines, (MECA’01), 2001-9-9 to 2001-9-10, Salerno, Italy.

Georgiou, TT and Smith, MC (2001) Remarks on ?Robustness analysis of nonlinear feedback systems: an input-output approach? IEEE Transactions on Automatic Control, 46. pp. 171-172. ISSN 0018-9286

Georgiou, TT and Smith, MC (2001) Remarks on “Robustness analysis of nonlinear feedback systems: an input-output approach”. IEEE Transactions on Automatic Control, 46. pp. 171-172. ISSN 0018-9286

Gerst, M and Eckert, CM and Clarkson, PJ and Lindemann, U (2001) Innovation in the tension of change and reuse. In: 13th International Conference on Engineering Design (ICED 01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 371-378..

Ghahramani, Z (2001) An introduction to hidden Markov models and Bayesian networks. International Journal of Pattern Recognition and Artificial Intelligence, 15. pp. 9-42. ISSN 0218-0014

Ghahramani, Z (2001) An introduction to hidden Markov models and Bayesian networks. In: Hidden Markov Models: Applications in Computer Vision. Series in Machine Perception and Artificial Intelligence, 45 . World Scientific Publishing, -.

Ghahramani, Z and Beal, MJ (2001) Graphical models and variational methods. In: Advanced Mean Field Methods: Theory and Practice. Neural Information Processing Series . MIT Press, Cambridge, MA, USA, pp. 161-177.

Ghahramani, Z and Beal, MJ (2001) Propagation algorithms for variational Bayesian learning. In: Advances in Neural Information Processing Systems 13. Bradford Series . MIT Press, Cambridge, MA, USA, pp. 507-513.

Ghosh, B and Madabhushi, SPG (2001) A study of effect of time discretisation in solving seismic wave propagation problems in soil. In: XVth International Conference on Soil Mechanics and Geotechnical Engineering: Lessons Learned From Recent Strong Earthquakes (Earthquake Geotechnical Engineering Satellite Conference), 2001-8-24 to 2001-8-25, Istanbul, Turkey.

Giannopoulos, P and Godsill, SJ (2001) Estimation of CAR processes observed in noise using Bayesian inference. In: The 26th International Conference on International Conference on Acoustics, Speech, and Signal Processing (ICASSP), 2001-5- to --, Salt Lake City, UT, US pp. 3133-3136..

Glauser, AR and Robertson, PA and Lowe, CR (2001) An electrokinetic sensor for studying immersed surfaces, using focused ultrasound. Sensors and Actuators B: Chemical, 80. pp. 68-82. ISSN 0925-4005

Glauser, AR and Robertson, PA and Lowe, CR (2001) An electrokinetic sensor for studying immersed surfaces, using focused ultrasound. Sensors and Actuators B: Chemical, 80. pp. 68-82. ISSN 0925-4005

Glauser, AR and Robertson, PA and Lowe, CR (2001) An electrokinetic sensor for studying immersed surfaces, using focused ultrasound. Sensors and Actuators, B: Chemical, 80. pp. 68-82. ISSN 0925-4005

Godsill, SJ (2001) On the relationship between Markov chain Monte Carlo methods for model uncertainty. Journal of Computational and Graphical Statistics, 10. pp. 230-248. ISSN 1061-8600

Godsill, SJ and Clapp, TC (2001) Improvement strategies for Monte Carlo particle filters. In: Sequential Monte Carlo Methods in Practice. Springer, New York, USA.

Godsill, SJ and Doucet, A and West, M (2001) Maximum a posteriori sequence estimation using Monte Carlo particle filters. Annals of the Institute of Statistical Mathematics, 53. pp. 82-96. ISSN 0020-3157

Godsill, SJ and Wolfe, PJ and Fong, WNW (2001) Statistical model-based approaches to audio restoration and analysis. Journal of New Music Research, 30. pp. 323-338. ISSN 0929-8215

Goloviznin, VM and Hynes, TP and Karabasov, SA (2001) Cabaret finite-difference schemes for the one-dimensional Euler equations | Vienmačiu{ogonek} Eulerio lygčiu{ogonek} sprendimas CABARET3 baigtiniu{ogonek}-skirtu- mu{ogonek} schemomis. Mathematical Modelling and Analysis, 6. pp. 210-220. ISSN 1392-6292

Goloviznin, VM and Hynes, TP and Karabasov, SA (2001) CABARET finite-difference schemes for one-dimensional Euler equations. Mathematical Modelling and Analysis, 6. pp. 210-220. ISSN 1392-6292

Goloviznin, VM and Hynes, TP and Karabasov, SA (2001) Comparative analysis of several high-resolution TVD schemes for the one-dimensional Euler equations. In: 3rd International Conference on Finite Difference Schemes, 2001-9-1 to 2001-9-4, Oalanga, Lithuania.

Gonzalez, P and Hodson, HP and Ulizar, I (2001) Improved blade profiles for high lift low pressure turbine applications. In: Conference Proceedings of the 4th European Conference on Turbomachinery, Fluid Dynamics and Thermodynamics, 2001-3-20 to 2001-3-23, Florence, Italy pp. 129-138..

Gonçalves, JM (2001) L2-gain of double integrators with saturation nonlinearity. Technical Report. California Institute of Technology (Caltech).

Gonçalves, JM (2001) Quadratic surface Lyapunov functions in global stability analysis of saturation systems. In: The American Control Conference, 6, 2001-6- to --, Arlington, VA, US pp. 4183-4188..

Gonçalves, JM and Megretski, A and Dahleh, MA (2001) Global analysis of piecewise linear systems using impact maps and quadratic surface Lyapunov functions. In: The European Control Conference (ECC) 2001, 2001-9-4 to 2001-9-7, Porto, Portugal pp. 1357-1362..

Gonçalves, JM and Megretski, A and Dahleh, MA (2001) Global stability of relay feedback systems. IEEE Transactions on Automatic Control, 46. pp. 550-562. ISSN 0018-9286

Graf, RAG and Kuo, CY and Dowling, AP and Graham, WR (2001) Tyre/road interaction noise. In: International Congress and Exhibition on Noise Control Engineering, 2001-8- to --, The Hague, The Netherlands.

Graham, WR (2001) An assessment of the 2-D vortex method in aircraft wake simulation. Aeronautical Journal, 105. pp. 653-666. ISSN 0001-9240

Greses, J and Hilton, PA and Barlow, CY and Steen, WM (2001) Spectroscopic studies of plume/plasma in different gas environments. In: The 20th ICALEO Congress 2001, 2001-10-15 to 2001-10-18, Jacksonville, Florida pp. 1043-1052..

Grognard, F and Jadot, F and Magni, L and Bastin, G and Sepulchre, R and Wertz, V (2001) Robust stabilization of a nonlinear cement mill model. IEEE Transactions on Automatic Control, 46. pp. 618-623. ISSN 0018-9286

Grognard, F and Sepulchre, R and IEEE, and IEEE, (2001) Global analysis of a continuous-time flow which computes time-optimal switchings. In: UNSPECIFIED pp. 3826-3831..

Gulam Razul, S and Andrieu, C and Fitzgerald, WJ (2001) Bayesian model selection and parameter estimation of nuclear emission spectra using RJMCMC. Technical Report. University of Cambridge: Department of Engineering, Cambridge, UK.

Gunawardana, A and Byrne, WJ (2001) Discounted likelihood linear regression for rapid speaker adaptation. Computer Speech and Language, 15. pp. 15-38. ISSN 0885-2308

H

H R, L and M P F, S (2001) A semi-empirical friction model for cold metal rolling. Tribology Transactions, 44. pp. 284-290. ISSN 0569-8197

Haan, N and Godsill, SJ (2001) Sequential methods for DNA sequencing. In: The 26th International Conference on International Conference on Acoustics, Speech, and Signal Processing (ICASSP), 2001-5- to --, Salt Lake City, UT, US pp. 1045-1048..

Haan, NM and Godsill, SJ (2001) A time-varying model for DNA sequencing data. In: The 11th IEEE Signal Processing Workshop on Statistical Signal Processing, 2001-8- to --, Singapore pp. 245-248..

Haigh, SK and Madabhushi, SPG and Newland, DE (2001) Newmarkian analysis of liquefaction induced lateral spreading. In: 4th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, 2001-3- to --, San Diego, CA, US.

Haigh, SK and Teymur, B and Madabhushi, SPG and Newland, DE (2001) Applications of wavelet analysis to the investigation of the dynamic behaviour of geotechnical structures. In: 10th International conference on Soil Dynamics and Earthquake Engineering; SDEE '01, 2001-10-9 to 2001-10-12, Philadelphia, PA, US pp. 995-1006..

Hain, T and Woodland, PC and Evermann, G and Povey, D (2001) New features in the CU-HTK system for transcription of conversational telephone speech. In: IEEE international Conference on Acoustics Speech and Signal Processing, 2001-5-7 to 2001-5-11, Salt Lake City, Utah pp. 57-60..

Hanna, S and Britter, RE (2001) The effect of roughness obstacles on flow and dispersion in urban and industrial areas. In: 7th International Conference on Harmonisation of Atmospheric Dispersion Modelling for Regulatory Purposes, 2001-5-28 to 2001-5-31, Belgirate, Lake Maggiore, Italy.

Hanna, SR and Britter, RE and Franzese, P (2001) The effect of roughness obstacles on flow and dispersion in urban and industrial areas. In: 5th Annual GMU Transport and Dispersion Modelling Workshop, 2001-7-18 to 2001-7-19, Fairfax, Virginia.

Harmer, Q and Clarkson, PJ and Wallace, KM and Farmer, AR (2001) Design for low-volume production. Institute for Manufacturing, University of Cambridge, Cambridge, UK.

Harrison, LJ and Clarkson, PJ and Keates, S (2001) Inclusive design: user capabilities and product demands. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 299-306..

Harte, AM and Fleck, NA and Ashby, MF (2001) The fatigue strength of sandwich beams with an aluminium alloy foam core. International Journal of Fatigue, 23. pp. 499-507. ISSN 0142-1123

Haruno, M and Wolpert, DM and Kawato, M (2001) Mosaic model for sensorimotor learning and control. Neural Computation, 13. pp. 2201-2220. ISSN 0899-7667

Hawkes, ER and Cant, RS (2001) Implications of a flame surface density approach to large eddy simulation of premixed turbulent combustion. Combustion and Flame, Volume. pp. 1617-1629. ISSN 0010-2180

Hawkes, ER and Cant, RS (2001) Implications of a flame surface density approach to large eddy simulation of premixed turbulent combustion. COMBUST FLAME, 126. pp. 1617-1629. ISSN 0010-2180

Hawkes, ER and Cant, RS (2001) Physical and numerical realizability requirements for flame surface density approaches to large-eddy and Reynolds averaged simulation of premixed turbulent combustion. Combustion Theory and Modelling, 5. pp. 699-720. ISSN 1364-7830

Heracleous, L and Barrett, M (2001) Organizational change as discourse: communicative actions and deep structures in the context of information technology implementation. Academy of Management Journal, 44. pp. 755-778. ISSN 0001-4273

Hill, M and Massara, A and Gioannini, M and Penty, RV and White, IH (2001) Performance of single mode laser components using 2D photonic lattice reflectors. LEOS Summer Topical Meeting. pp. 7-8. ISSN 1099-4742

Hill, M and Massara, AB and Gioannini, M and Penty, RV and White, IH (2001) Performance of single mode laser components using 2D photonic lattice reflectors. In: Advanced Semiconductor Lasers and Applications/Ultraviolet and Blue Lasers and Their Applications/Ultralong Haul DWDM Transmission and Networking/WDM Components, 2001 Digest of the LEOS Summer Topical Meetings, 2001-7-30 to 2001-8-1, Copper Mountain, CO, USA.

Hiniduma Udugama Gamage, SS and Lasenby, J (2001) Estimation of centres and axes of rotation of articulated bodies in general motion for global skeleton fitting. Technical Report. University of Cambridge Department of Engineering, Cambridge, UK.

Hiniduma Udugama Gamage, SS and Lasenby, J (2001) Extraction of rigid body dynamics from motion capture data. Technical Report. University of Cambridge Department of Engineering, Cambridge, UK.

Hiniduma Udugama Gamage, SS and Lasenby, J (2001) A new least squares solution for estimation of centre and axis of rotation. Technical Report. University of Cambridge Department of Engineering, Cambridge, UK.

Hochgreb, S (2001) Fuel distribution and combustion characteristics in a direct-injection, spark-ignited (Disi) engine under stratified operation. SAE Transactions, 110. pp. 2351-2364. ISSN 0096-736X

Hochgreb, S (2001) Liquid fuel impingement on the piston bowl of a direct-injection, spark- ignited (Disi) engine under stratified operation. SAE Transactions, 110. pp. 2365-2375. ISSN 0096-736X

Holburn, DM and Lalithambika, VA and Joyner, VM and Samsudin, RJ and Mears, RJ (2001) An integrated CMOS transceiver for indoor optical wireless links. In: UNSPECIFIED pp. 154-159..

Holburn, DM and Mears, RJ and Samsudin, RJ and Joyner, VM and Lalithambika, VA (2001) A CMOS 155Mb/s optical wireless transmitter for indoor networks. In: UNSPECIFIED pp. 124-132..

Houle, TJ and Onischenko, AI and Rorison, JM and Penty, RV and White, IH and Springthorpe, AJ and White, K and Paddon, P and Garanzotis, T (2001) Temperature dependence of threshold current – a better criterion than T0? In: 9th Conference on Physics and Simulation of Optoelectronic Devices, 2001-1-22 to 2001-1-25, San Jose, California, USA pp. 238-246..

Houle, TJ and Onischenko, AI and Rorison, JM and Penty, RV and White, IH and Springthorpe, AJ and White, K and Paddon, P and Garanzotis, T (2001) Temperature dependence of threshold current: a better criterion than T0? In: Physics and Simulation of Optoelectronic Devices Conference, 9th, 2001-1- to --, San Jose, CA, USA pp. 238-246..

Houle, TJ and Williams, KA and Murray, B and Rorison, JM and White, IH and Springthorpe, AJ and White, K and Paddon, P and Crump, PA and Silver, M (2001) A detailed comparison of the temperature sensitivity of threshold of InGaAsP/InP, AlGaAs/GaAs, and AlInGaAs/InP lasers. In: Conference on Lasers and Electro-Optics, 2001-5- to --, Baltimore, MD, USA.

Huang, S and Amaratunga, GAJ and Udrea, F (2001) A novel single gate MOS controlled current saturated thyristor. IEEE Electron Device Letters, 22. pp. 438-440. ISSN 0741-3106

Huang, S and Amaratunga, GAJ and Udrea, F (2001) A novel single gate MOS controlled current saturated thyristor. IEE Electron Device Letters, 22. pp. 438-440. ISSN 0741-3106

Huang, S and Amaratunga, GAJ and Udrea, F and Sheng, K and Waind, P and Coulbeck, L and Taylor, P (2001) A dual-channel IEGT. Microelectronics Journal, 32. pp. 755-761. ISSN 0026-2692

Huang, S and Amaratunga, GAJ and Udrea, F and Waind, P and Coulbeck, L and Taylor, P (2001) A new single gate MOS controlled thyristor with current saturation and large SOA. In: The 6th IEEE International Conference on Solid-State and Integrated Circuit Technology, 2001-10- to --, Shanghai, China pp. 162-165..

Huang, S and Sheng, K and Amaratunga, GAJ and Udrea, F (2001) A dynamic n-buffer insulated gate bipolar transistor. Solid-State Electronics, 45. pp. 173-182. ISSN 0038-1101

Huang, W and Pellegrino, S (2001) Shape memory alloy actuators for deployable structures: phase I. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Hubbard, S and Dowling, AP (2001) Acoustics resonances of an industrial gas turbine combustion system. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 123. pp. 766-773. ISSN 1528-8919

Huber, JE and Fleck, NA (2001) Multi-axial electrical switching of a ferroelectric: theory versus experiment. Journal of the Mechanics and Physics of Solids, 49. pp. 785-811. ISSN 0022-5096

Hudgins, J and Santi, E and Caiafa, A and Lengel, K and Palmer, PR (2001) Thyristors. In: Power Electronics Handbook. Academic Press, -.

Hughes, A and Cosh, A (2001) Innovation: the contribution of European SMEs. In: Enterprises in Europe: Data 1987-97. Sixth Report. Eurostat, Luxembourg.

Hughes, A and Cosh, AD and Cox, M (2001) The impact of financial management training on management and business performance: an evaluation of the Small Business Initiative. Technical Report. British Bankers Association and Small Business Service of the DTI, London.

Hugo, OA and Garnsey, EW (2001) Investigating the growth paths of young technology-based firms: a process approach. Centre for Technology Management, Institute of Manufacturing.

Hunt, F and Farrukh, CJ and Phaal, R (2001) Technology re-use: developing a practical approach to making the most of your technological assets. In: 10th International Conference on Management of Technology (IAMOT 2001), 2001-3-19 to 2001-3-22, Lausanne, Switzerland pp. 317-330..

Hunt, GR and Cooper, P and Linden, PF (2001) Thermal stratification produced by plumes and jets in enclosed spaces. Building and Environment, 36. pp. 871-882. ISSN 0360-1323

Hunt, GR and Kaye, NG (2001) Virtual origin correction for lazy turbulent plumes. Journal of Fluid Mechanics, 435. pp. 377-396. ISSN 0022-1120

Hunt, GR and Linden, PF (2001) Steady-state flows in an enclosure ventilated by buoyancy forces assisted by wind. J FLUID MECH, 426. pp. 355-386. ISSN 0022-1120

Hunt, HEM (2001) Encyclopedia of materials. In: Encyclopedia of materials. UNSPECIFIED, -.

Hutchings, IM (2001) Keynote: abrasion process in wear manufacturing. In: EUROMAT 2001: Polymer Processing and Structure Relationships, 2001-6-10 to 2001-6-14, Rimini, Italy.

Hutchings, IM (2001) Tribology in the U. K.: past, present and future. Journal of Japanese Society of Tribologists (Toraiborojisuto), 46. pp. 17-23. ISSN 0915-1168

Hutchings, IM (2001) Wear and lubrication. In: Encyclopaedia of Materials Science and Technology. Elsevier Science . Elsevier, Amsterdam, Netherlands, pp. 9551-9556.

Hutchinson, T and Fox, P and O'Neill, W (2001) Direct production of metallic objects using laser fused slips. In: Materials Opportunities on Layered Manufacturing Technology 2, 2001-6-3 to 2001-6-6, UMIST, Manchester, Great Britain.

Hwang, F (2001) Towards improved computer interfaces for motion-impaired users.

Hwang, F and Keates, S and Langdon, PM and Clarkson, PJ and Robinson, P (2001) Perception and haptics: towards more accessible computers for motion-impaired users. In: Perceptual User Interfaces (PUI 2001), 2001-11-15 to 2001-11-16.

Hwang, F and Langdon, PM and Keates, S and Clarkson, PJ (2001) Haptic assistance to improve computer access for motion-impaired users. In: EuroHaptics 2001, 2001-7-1 to 2001-7-4 pp. 176-178..

Hynes, TP and Karabasov, SA (2001) Unsteady calculation of 2-D inviscid flow with shocks. In: 6th International Conference on Mathematical Modelling and Analysis (MMA), 2001-5- to --, Vilinius, Lithuania.

Hynes, TP and Karabasov, SA (2001) A compact high resolution monotonic difference scheme for the one dimensional Euler equations. In: 6th International Conference on Mathematical Modelling and Analysis (MMA), 2001-5- to --, Vilinius, Lithuania.

Hynes, TP and Karabasov, SA (2001) Unsteady calculation of 2-d inviscid flow with shocks. In: Proceedings of the 6th International Conference on Mathematical Modelling and Analysis, 2001-5-31 to 2001-6-2, Vilnius, Lithuania p. 34..

Hynes, TP and Karabasov, SA (2001) A compact high-resolution monotonic difference scheme for the one-dimensional Euler equations. In: Proceedings of the 6th International Conference on Mathematical Modelling and Analysis, 2001-5-31 to 2001-6-2, Vilnius, Lithuania p. 33..

I

Ilie, A and Ferrari, AC and Yagi, T and Rodil, SE and Robertson, J and Barborini, E and Milani, P (2001) Role of sp2 phase in field emission from nanostructured carbons. Journal of Applied Physics, 90. pp. 2024-2032. ISSN 0021-8979

Imbeni, V and Martini, C and Lanzoni, E and Poli, G and Hutchings, IM (2001) Tribological behaviour of multi-layered PVD nitride coatings. Wear, 250. pp. 997-1002. ISSN 0043-1648

Infantino, I and Cipolla, R and Chella, A (2001) Reconstruction of architectural scenes from uncalibrated photos and maps. IEICE Transactions on Information and Systems E: Series D, 84. pp. 1620-1625. ISSN 0916-8532

Infantino, I and Cipolla, R and Chella, A (2001) Reconstruction of architectural scenes from uncalibrated photos and maps. In: UNSPECIFIED pp. 1620-1625..

Ingham, JD and Webster, M and Heard, PJ and Penty, RV and White, IH (2001) 1.25 Gb/s bidirectional multimode fibre data link using a dual-purpose vertical-cavity laser and detector. In: 27th European Conference on Optical Communication 2001, ECOC 01, 2001-9-30 to 2001-10-4, Amsterdam, The Netherlands pp. 462-463..

Inoue, A and Drummond, T and Cipolla, R (2001) Real time feature-based facial tracking using Lie algebras. IEICE Transactions on Information and Systems, E84-D. pp. 1733-1738. ISSN 0916-8532

Inoue, A and Drummond, T and Cipolla, R (2001) Real time feature-based facial tracking using Lie algebras. IEICE T INF SYST, E84D. pp. 1733-1738. ISSN 0916-8532

Inskip, KJ and Best, PN and Longair, MS and MacKay, DJC (2001) Infrared Magnitude-Redshift Relations for Luminous Radio Galaxies. Mon.Not.Roy.Astron.Soc., 329. 277-.

Ionicioiu, R and Amaratunga, GAJ and Udrea, F (2001) Quantum computation with ballistic electrons. International Journal of Modern Physics B, 15. pp. 125-133. ISSN 0217-9792

Izmajlowicz, MAT and Morrison, NA and Flewitt, AJ and Milne, WI (2001) Directional field aided lateral crystallization of amorphous silicon thin films. Materials Research Society Symposium Proceedings, 664. p. A6.7-. ISSN 1072-3587

J

Jacobsz, SW and Standing, JR and Mair, RJ and Soga, K and Hagiwara, T and Sugiyama, T (2001) The effects of tunneling near single driven piles in dry sand. In: The regional conference on geotechnical aspects of Underground Construction in Soft Ground, 2001-4- to -- pp. 29-35..

Jacobz, SW and Standing, JR and Mair, RJ and Soga, K and Hagiwara, T and ` Sugiyama, T (2001) Tunnelling effects on driven piles. In: The Conference on Response of Buildings to Excavation-induced Ground Movements, 2001-7- to -- pp. 337-348..

Jafari, MR and Au, SKA and Soga, K and Bolton, MD and Komiya, K (2001) Fundamental laboratory investigation of compensation grouting in clay. ASCE Geotechnical Special Publication, 113. pp. 445-459. ISSN 0895-0563

Jalobeanu, A and Kingsbury, NG and Zerubia, J (2001) Image deconvolution using hidden Markov tree modeling of complex wavelet packets. In: The IEEE International Conference on Image Processing (ICIP'01), 2001-10- to -- pp. 201-204..

Jarratt, TAW (2001) Change propagation in product development.

Jarratt, TAW and Cooke, AJ (2001) A comparison of cricket ball cores. In: Materials and Science in Sports, 2001-4-22 to 2001-4-25, Coronado, CA, USA pp. 133-144..

Jarrett, JP and Clarkson, PJ (2001) Improving the product by accelerating the process. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 141-148..

Jenkins, KW and Cant, RS (2001) Flame kernel interactions in a turbulent environment. In: DNS/LES: progress and challenges : proceedings of the AFOSR international conference on DNS/LES. Greyden.

Jeppesen, BP and Cebon, D (2001) Real-time fault identification in an active roll control system. In: The 17th International Symposium of the International Association for Vehicle System Dynamics (IAVSD): the Dynamics of Vehicles on Roads and on Tracks, 2001-8-20 to 2001-8-24, Lyngby, Denmark pp. 360-371..

Jiang, C and Liang, D and Wang, G (2001) A finite volume scheme for weakly compressible equations, part 2: application in incompressible flows. In: The 29th IAHR Congress, 2001-9-16 to 2001-9-21, Beijing, China pp. 851-856..

Joer, H and Bolton, MD and Randolph, MR (2001) Compression and crushing behaviour of calcareous soils. In: International Workshop on Soil Crushability, IWSC'01, 2001-- to --, Yamaguchi University, Japan.

Johnson, KW (2001) A creative process for material selection in product design. PhD thesis, UNSPECIFIED.

Johnson, KW and Lenau, T and Ashby, MF (2001) The aesthetic and perceived attributes of materials and products. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Johnson, SE and Jourlin, P and Sparck Jones, K and Woodland, PC (2001) Information retrieval from unsegmented broadcast news audio. International Journal of Speech Technology, 4. pp. 251-268. ISSN 1381-2416

Johnson, SE and Jourlin, P and Sparck Jones, K and Woodland, PC (2001) Spoken document retrieval for TREC-9 at Cambridge University. NIST Special Publication: The Ninth Text REtrieval Conference (TREC 9), 500. pp. 117-126.

Jones, M (2001) From control to drift: the dynamics of corporate information structures, by Ciborra CU. New Technology, Work and Employment, 16. pp. 146-147.

Jones, M (2001) An interpretive method for the formative evaluation of an electronic patient record system. In: UNSPECIFIED.

Jones, M and Shoib, G (2001) Sales people in general: they don't have strong thinking and problem solving skills: rationality, culture and IS in Egypt. In: UNSPECIFIED.

Juniper, MP and Leroux, B and Lacas, F and Candel, S (2001) Stabilization of cryogenic flames and effects of recess. In: Combustion dans les Moteurs Fusees. Cepadues, Toulouse, France, pp. 221-231.

Juniper, MP and Tripathi, A and Scouflaire, P and Rolon, JC and Candel, S (2001) Turbulent combustion of sprays under supercritical conditions. In: Proceedings of the IUTAM Symposium Turbulent Mixing and Combustion, 2001-6-3 to 2001-6-6, Ontario, Canada pp. 439-446..

Juniper, MP and Tripathi, A and Scouflaire, P and Rolon, JC and Candel, S (2001) The structure of cryogenic flames and subcritical and supercritical pressures. In: Combustion dans les Moteurs Fusees. Cepadues, Toulouse, France, pp. 347-357.

K

Kambara, M and Babu, NH and Sadki, ES and Cooper, JR and Minami, H and Cardwell, DA (2001) High temperature phase relationships in (Y,Nd)123 superconducting oxides. Physica C: Superconductivity, 357-36. pp. 649-653. ISSN 0921-4534

Kambara, M and Babu, NH and Sadki, ES and Cooper, JR and Minami, H and Cardwell, DA and Campbell, AM and Inoue, IH (2001) High intergranular critical currents in metallic MgB2 superconductor. SUPERCOND SCI TECH, 14. L5-L7. ISSN 0953-2048

Kambara, M and Babu, NH and Sadki, ES and Cooper, JR and Minami, H and Cardwell, DA and Campbell, AM and Inoue, IH (2001) High intergranular critical currents in metallic MgB~2 superconductor. Superconductor Science and Technology, 14. L5-L7. ISSN 0953-2048

Kambara, M and Babu, NH and Shi, Y and Cardwell, DA (2001) Crystal growth of melt-textured Nd-123 under 1% oxygen partial pressure atmosphere. IEEE Transactions on Applied Superconductivity, 11. pp. 3442-3445. ISSN 1051-8223

Kambara, M and Babu, NH and Shi, Y and Cardwell, DA (2001) Growth of melt-textured Nd-123 by hot seeding under reduced oxygen partial pressure. Journal of Materials Research, 16. pp. 1163-1170. ISSN 0884-2914

Kambara, M and HariBabu, N and Shi, Y and Cardwell, DA (2001) Crystal growth of melt-textured Nd-123 under 1% oxygen partial pressure atmosphere. IEEE Transactions on Applied Superconductivity, 11. pp. 3442-3445. ISSN 1051-8223

Kambara, M and HariBabu, N and Shi, Y and Cardwell, DA (2001) Crystal growth of melt-textured Nd-123 under 1% oxygen partial pressure atmosphere. In: UNSPECIFIED pp. 3442-3445..

Kauzlarich, JJ and Williams, JA (2001) Archard wear and component geometry. Proceedings of the Institution of Mechanical Engineers, J: Journal of Engineering Tribology, 215. pp. 387-403. ISSN 1350-6501

Kauzlarich, JJ and Williams, JA (2001) Archard wear and component geometry. P I MECH ENG J-J ENG, 215. pp. 387-403. ISSN 1350-6501

Kawano, K and Abell, JS and Bradley, AD and Lo, W and Cardwell, DA (2001) Magnetic field and current distributins in melt-textured YBa 2Cu 3O 7-x with an artificial grain boundary. IEEE Transactions on Applied Superconductivity, 11. pp. 3505-3508. ISSN 1051-8223

Kawano, K and Abell, JS and Bradley, AD and Lo, W and Cardwell, DA (2001) Magnetic field and current distributions in melt-textured YBa2 Cu3O7-x with an artificial grain boundary. IEEE Transactions on Applied Superconductivity, 11. p.3505-3508.

Kawano, K and Abell, JS and Bradley, AD and Lo, W and Cardwell, DA (2001) Magnetic field and current distributions in melt-textured YBa2Cu3O7-x with an artificial grain boundary. IEEE Transactions on Applied Superconductivity, 11. pp. 3505-3508. ISSN 1051-8223

Kawano, K and Abell, JS and Bradley, AD and Lo, W and Cardwell, DA (2001) Magnetic field and current distributions in melt-textured YBa2Cu3O7-x with an artificial grain boundary. In: UNSPECIFIED pp. 3505-3508..

Kawano, K and Abell, JS and Kambara, M and Babu, NH and Cardwell, DA (2001) Evidence for high intergranular current flow in a single-phase polycrystalline MgB2 superconductor. Applied Physics Letters, 79. pp. 2216-2218. ISSN 0003-6951

Keates, S and Clarkson, PJ (2001) Combining utility, usability and accessibility methods for universal access. In: CHI 2001 anyone anywhere: conference on human factors in computing systems, 2001-3-31 to 2001-4-5, Seattle, MI, USA.

Keates, S and Clarkson, PJ and Robinson, P (2001) Gesture input and motion-impaired users. In: Encyclopedia of Microcomputers. Marcel Dekker, Inc, pp. 147-166.

Keates, S and Clarkson, PJ and Robinson, P (2001) Gesture input and motion-impaired users. In: Encyclopedia of Library and Information Science. Taylor and Francis (CRC Press), pp. 128-150.

Keates, S and Hwang, F and Langdon, PM and Clarkson, PJ and Robinson, P (2001) Using cursor control measures to suggest methods of cursor assistance for motion-impaired users. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Keates, S and Langdon, PM and Clarkson, PJ and Robinson, P (2001) Cognitive considerations in the design of multi-modal input systems. In: 1st International Conference on Universal Access and HCI (UAHCI), 2001-8-5 to 2001-8-10, New Orleans, USA.

Keates, S and Langdon, PM and Clarkson, PJ and Robinson, P (2001) A practical approach to design for universal access: the information point case study. In: 1st International Conference on Universal Access and HCI (UAHCI), 2001-8-5 to 2001-8-10, New Orleans, USA.

Kelly, DA and Hutchings, IM (2001) A new method for measurement of particle abrasivity. Wear, 250. pp. 76-80. ISSN 0043-1648

Kelly, S and Jones, M (2001) Groupware and the social infrastructure of communication. Communications of the ACM, 44. pp. 77-79. ISSN 0001-0782

Kennerley, M and Neely, A (2001) Enterprise resource planning: Analysing the impact. Integrated Manufacturing Systems, 12. pp. 103-113. ISSN 0957-6061

Kennish, YC and Shercliff, HR and Liddell, I (2001) Tensile strength and tear resistance of woven polyethylene fabric. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kennish, YC and Shercliff, HR and Liddell, I (2001) Tensile strength and tear resistance of woven polyethylene fabric. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Kerrigan, EC and Maciejowski, JM (2001) Robust Feasibility in Model Predictive Control: Necessary and Sufficient Conditions. In: The 40th IEEE Conference on Decision and Control, -- to -- pp. 728-733..

Kesse, G and Chan, C and Lees, JM (2001) Non-linear finite element analysis of RC beams prestressed with CFRP straps. In: 5th International Conference on Fibre-Reinforced Plastics for Reinforced Concrete Structures (FRPRCS-5), 2001-7-16 to 2001-7-18, Cambridge, UK pp. 281-290..

Khan, AH and O'Neill, W and Sutcliffe, CJ and Tunna, L (2001) Design of an axisymmetric supersonic nozzle for micro laser cutting. In: The 20th ICALEO Congress 2001, 2001-10-15 to 2001-10-18 pp. 353-362..

Kim, JH and Woodland, PC (2001) The use of prosody in a combined system for punctuation generation and speech recognition. In: 7th European Conference on Speech Communication and Technology, 2001-9-3 to 2001-9-7, Aalborg, Denmark pp. 2757-2760..

Kim, TB and Zhao, CY and Lu, TJ and Hodson, HP (2001) Convective heat dissipation with lattice-frame materials. Mechanics of Materials, 36. pp. 767-780. ISSN 0167-6636

Kim, TK and Choi, JP and Kee, SC and Kim, SR (2001) Independent component analysis based frontal face detection. Proceedings of Workshops in Image Processing and Image Understanding (IPIU).

Kim, TK and Kee, SC and Kim, SR (2001) Independent component analysis based frontal face detection. Proceedings of Workshops in Image Processing and Image Understanding (IPIU).

Kim, TK and Kee, SC and Kim, SR (2001) Real-time normalization and feature extraction of 3D face data using curvature characteristics. In: 10th IEEE International Workshop on Robot and Human Interactive Communication, 2001-9-18 to 2001-9-21, Paris, France pp. 74-79..

Kimura, M and Nozawa, R and Inoue, S and Shimoda, T and Lui, BOK and Tam, SWB and Migliorato, P (2001) Extraction of trap states at the oxide-Silicon interface and grain boundary in polycrystalline Silicon thin-film transistors. Japanese Journal of Applied Physics, 40. pp. 112-113. ISSN 0021-4922

Kingsbury, NG (2001) Complex wavelets for shift invariant analysis and filtering of signals. Applied and Computational Harmonic Analysis, 10. pp. 234-253. ISSN 1063-5203

Kiss, T and Orban, G and Lengyel, M and Erdi, P (2001) Intrahippocampal gamma and theta rhythm generation in a network model of inhibitory interneurons. Neurocomputing, 38-40. pp. 713-719. ISSN 0925-2312

Kleinsorge, B and Rodil, SE and Adamopoulos, G and Robertson, J and Grambole, D and Fukarek, W (2001) Hydrogen and disorder in diamond-like carbon. Diamond and Related Materials, 10. pp. 965-969. ISSN 0925-9635

Kobayashi, I and Soga, K and Lizuka, A and Ohta, H and Dalton, C (2001) Effect of pore water migration on self-boring pressuremeter strength. JSCE Journal of Applied Mechanics, 4. pp. 285-294.

Kollingbaum, M and Heikkila, T and Peeters, P and Matson, J and Valckenaers, P and McFarlane, D and Bluemink, GJ (2001) Emergent flow shop control based on MASCADA agents. In: UNSPECIFIED pp. 187-192..

Komiya, K and Soga, K and Akagi, H and Jafari, MR and Bolton, MD (2001) Soil consolidation associated with grouting during shield tunnelling in soft clayey ground. Géotechnique, 51. pp. 835-846. ISSN 0016-8505

Korenberg, AT and Ghahramani, Z (2001) Adaptation to switching force fields. In: 11th Annual Meeting of Neural Control of Movement, 2001-3-24 to 2001-4-1, Seville, Spain.

Korenberg, AT and Ghahramani, Z (2001) Adaptative feedback control for non-stationary dynamics. In: 3rd International Conference on Sensorimotor Control in Man and Machines, 2001-- to --, Marseille, France.

Krishnamurthy, V and Yin, G and Singh, SS (2001) Adaptive step-size algorithms for blind interference suppression in DS/CDMA systems. IEEE Transactions on Signal Processing, 49. pp. 190-201. ISSN 1053-587X

Kukathasan, S and Pellegrino, S (2001) Vibration of prestressed membrane reflectors. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Kutter, BL and Madabhushi, SPG (2001) General report on session 9: model and full scale test of geotechnical structures including centrifuge tests. In: 4th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, 2001-3- to --, San Diego, CA, USA.

Kutulya, LA and Vashchenko, VV and Doroshenko, AO and Pivnenko, MN and Chepeleva, LV and Pivnenko, NS and Shkolnikova, NI (2001) New chiral E- and Z-isomers of the 1R,4R-2-arylidene-p-menthane-3-ones in induced cholesteric and ferroelectric liquid crystals. Proceedings of SPIE - The International Society for Optical Engineering, 4418. pp. 89-98. ISSN 0277-786X

Kwok, T and Wilkinson, TD and Crossland, WA (2001) CMOS camera with on-chip signal processing for optical correlators. In: Wave Optics and VLSI Photonic Devices for Information Processing. Proceedings of SPIE, 4435 . SPIE: The International Society for Optical Engineering, pp. 184-195.

L

Lahav, M and Durkan, C and Gabai, R and Katz, E and Willner, I and Welland, ME (2001) Redox Activation of a Polyaniline-Coated Cantilever: An Electro-Driven Microdevice Parts of this research are supported by The Israel Ministry of Science and the Israel Science Foundation. M. Lahav gratefully acknowledges the support of The Clore Israel Foundation Scholars Programme. Angew Chem Int Ed Engl, 40. pp. 4095-4097.

Lahav, M and Durkan, C and Gabai, R and Katz, E and Willner, I and Welland, ME (2001) Redox activation of a polyaniline-coated cantilever: an electro-driven microdevice. Angewandte Chemie (International Edition), 40. pp. 4095-4097. ISSN 0570-0833

Lahav, M and Durkan, C and Gabai, R and Katz, E and Willner, I and Welland, ME (2001) Redox activation of a polyaniline-coated cantilever: an electro-driven microdevice. Angewandte Chemie, 113. pp. 4219-4221. ISSN 0044-8249

Lahav, M and Gabai, R and Katz, E and Willner, I and Durkan, C and Welland, ME (2001) Redox-activation of a polyaniline coated cantilever: An electro-driven machine microdevice. In: ECEM-6: European Conference on Molecular Electronics, 2001-9-12 to 2001-9-16, Roldue, Kerkrabe, The Netherlands.

Lai, CY and Pellegrino, S (2001) Design and testing of a 1.5m offset CTRS demonstrator. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lai, CY and Pellegrino, S (2001) Non-linear finite element analysis of CRTS reflectors. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lai, CY and Pellegrino, S (2001) Shape and stress analysis of offset CRTS reflectors. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lai, CY and Pellegrino, S (2001) Shape and stress analysis of symmetric CRTS reflectors. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Lai, DF and Robertson, J and Milne, WI (2001) Plasma oxidation of silicon using an electron cyclotron wave resonance (ecwr) plasma source. Thin Solid Films, 383. pp. 220-223. ISSN 0040-6090

Lalithambika, VA and Joyner, VM and Holburn, DM and Mears, RJ (2001) Development of a CMOS 310Mb/s receiver for free space optical wireless links. In: UNSPECIFIED pp. 133-143..

Langdon, PM and Bracewell, RH and Blessing, LTM and Wallace, KM and Clarkson, PJ (2001) A practical methodology for integrating software development and empirical techniques in design. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 557-564..

Langdon, PM and Chakrabarti, A (2001) Improving access to design solution spaces using visualization and data reduction techniques. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 3-10..

Langdon, PM and Keates, S and Clarkson, PJ and Robinson, P (2001) Investigating the cursor movement parameters for haptic assistance of motion-impaired users. In: Integration of Assistive Technology in the Information Age: the 7th International Conference on Rehabilitation Robotics, -- to -- pp. 237-242..

Langdon, PM and Keates, S and Clarkson, PJ and Robinson, P (2001) Investigating the parameters of force-feedback assistance for motion-impaired users in a GUI selection task. In: The 1st International Conference on Universal Access and HCI (UAHCI), 2001-8-5 to 2001-8-10.

Lapeer, RJA and Prager, RW (2001) Fetal head moulding: finite element analysis of a fetal skull subjected to uterine pressures during the first stage of labour. Journal of Biomechanics, 34. pp. 1125-1133. ISSN 0021-9290

Lasenby, AN and Lasenby, J (2001) Applications of geometric algebra in physics and links with engineering. In: Geometric Algebra with Applications in Science and Engineering. Birkhauser, Boston, MA, USA, pp. 430-456.

Lasenby, J and Bayro Corrochano, E (2001) Analysis and computation of projective invariants from multiple views in the geometric algebra framework. In: Invariants for Pattern Recognition and Classification. Machine Perception and Artificial Intelligence, 42 . World Scientific Publishing, London, UK, pp. 1-22.

Lasenby, J and Stevenson, AXS (2001) Using geometric algebra for optical motion capture. In: Geometric Algebra with Applications in Science and Engineering. Birkhauser, Boston, MA, USA, pp. 147-167.

Lasenby, J and Stevenson, AXS (2001) The geometry and algebra of computer vision. In: Geometric Algebra with Applications in Science and Engineering. Birkhauser, Boston, MA, USA, pp. 123-146.

Lawrence, NA and Wilkinson, TD and Crossland, WA (2001) Combined image decompression and display driving using wavelet-based multiple line addressing. SID International Symposium Digest of Technical Papers, 32. pp. 98-101. ISSN 0097-966X

Lawrence, NA and Wilkinson, TD and Crossland, WA (2001) Integrated image decompression and display driving for portable communication devices using DWTs. In: Wavelet Applications VIII. Proceedings of SPIE, 4391 . SPIE: The International Society for Optical Engineering, pp. 197-208.

Le, HR and Sutcliffe, MPF (2001) Rolling of thin strip and foil: Application of a tribological model for "mixed" lubrication. American Society of Mechanical Engineers, Tribology Division, TRIB. pp. 1-8.

Le, HR and Sutcliffe, MPF (2001) A robust model for rolling of thin strip and foil. INT J MECH SCI, 43. pp. 1405-1419. ISSN 0020-7403

Lee, CJ and Al-Tabbaa, A and Bolton, MD (2001) Development of tensile force in piles in swelling ground. In: UNSPECIFIED pp. 345-350..

Lee, CJ and Bolton, MD and Al Tabbaa, A (2001) Recent findings on negative skin friction on piles and in pile groups in consolidating ground. In: 5th International Conference on Deep Foundation Practice, 2001-4- to --, Singapore pp. 273-280..

Lee, SW and Bolton, MD and Dasari, GR and Mair, RJ and Soga, K and Hagiwara, T (2001) Centrifuge and numerical simulation of compensation grouting near tunnel linings. In: The 15th International Conference on Soil Mechanics and Geotechnical Engineering (XVth ICSMGE), 2001-8-27 to 2001-8-31, Istanbul, Turkey pp. 1399-1402..

Lee, SW and Bolton, MD and Mair, RJ and Hagiwara, T and Soga, K and Dasari, GR (2001) Centrifuge modelling of injections near tunnel linings. International Journal of Physical Modelling in Geotechnics, 1. pp. 9-24. ISSN 1346-213X

Lee, SW and Bolton, MD and Mair, RJ and Soga, K and Dasari, GR and Hagiwara, T (2001) Soil Models and stress paths on injection in sand. In: Conference on Geotechnical Aspects of Underground Construction in Soft Ground, 2001-4- to --, Shanghai, China pp. 626-631..

Lees, JM (2001) Fibre-reinforced polymers in reinforced and prestressed concrete applications: moving forward. Progress in Structural Engineering and Materials, 3. pp. 122-131. ISSN 1365-0556

Lester, G and Coles, H (2001) PTFE alignment for rapid prototyping of LCDs. Proceedings of SPIE - The International Society for Optical Engineering, 4759. pp. 463-468. ISSN 0277-786X

Leung, HY and Burgoyne, CJ (2001) Analysis of FRP-reinforced concrete beam with aramid spirals as compression confinement. In: The International Conference on Structural Engineering Mechanics and Computation, 2001-6- to --, Cape Town, South Africa pp. 335-342..

Leung, HY and Burgoyne, CJ (2001) Compressive behaviour of concrete confined by aramid fibre spirals. In: The International Conference on Structural Engineering Mechanics and Computation, 2001-6- to --, Cape Town, South Africa, pp. 1357-1346..

Leung, HY and Burgoyne, CJ (2001) Prestressed concrete beam with aramid fibre compression confiinement and external tendons. In: The 5th International Conference on Fibre-Reinforced Plastics for Reinforced Concrete Structures, FRPRCS-5, 2001-7-16 to 2001-7-18, Cambridge, UK pp. 875-886..

Li, G and Bracewell, RH and Wallace, KM (2001) A knowledge framework to support engineering design. In: The 8th International Conference on Concurrent Engineering (CE 2001), 2001-7- to --, Anaheim, CA, USA KM1-5..

Li, JP and Balazs, ME and Parks, GT and Clarkson, PJ (2001) Complexity analysis of evaluating distances in the genetic algorithm using species conservation. In: Proceedings of the 2001 Congress on Evolutionary Computation (CEC2001), 2001-5-27 to 2001-5-30, Seoul, Korea pp. 52-59..

Liu, JS and Parks, GT and Clarkson, PJ (2001) Shape optimisation of axisymmetric cylindrical nozzles in spherical pressure vessels subject to stress constraints. International Journal of Pressure Vessels and Piping, 78. pp. 1-9. ISSN 0308-0161

Liu, JS and Parks, GT and Clarkson, PJ (2001) Shape optimisation of turbine disks under multiple thermo-mechanical loads. In: 3rd ASMO UK/ISSMO Conference on Engineering Design Optimization, 2001-7-9 to 2001-7-10, Harrogate, West Yorkshire pp. 151-158..

Livesey, F (2001) Technology and innovation policy: past, present, and future. Kennedy School Review, June 2. pp. 11-24.

Loo, P and Kingsbury, NG (2001) Motion-estimation-based registration of geometrically distorted images for watermark recovery. In: The 3rd SPIE International Conference on Security and Watermarking of Multimedia Contents, 2001-1- to -- pp. 606-617..

Lu, C-C and Udrea, F and Gardner, JW and Setiadi, D and Dogaru, T and Tsai, TH and Covington, JA (2001) Design and coupled-effect simulations of CMOS micro gas-sensors built on SOI thin membranes. Proceedings of SPIE - The International Society for Optical Engineering, 4408. pp. 86-95. ISSN 0277-786X

Lu, CC and Gardner, JW and Udrea, F (2001) Artificial olfaction and electronic nose technology. Instruments Today, 6. pp. 86-96.

Lu, CC and Gardner, JW and Udrea, F (2001) Design and development of SOI MOSFET micro gas sensors. Instruments Today, 5. pp. 76-90.

Lu, CC and Udrea, F and Gardner, JW and Setiadi, D and Dogaru, T and Tsai, TH and Covington, JA (2001) Design and coupled-effect simulations of CMOS micro gas sensors built on SOI thin membranes. In: The SPIE International Symposium on the Design, Test, Integration, and Packaging of MEMS/MOEMS, 2001-4- to --, Cannes, France pp. 86-95..

Lu, TJ and Kim, T and Zhao, CY and du Chene, A and Hodson, HP (2001) Thermal management with micro-architectured materials and metal foams. In: ONR Workshop, 2001-6- to --, Cambridge University, Cambridge, England.

Lui, OKB and Tam, SWB and Migliorato, P and Shimoda, T (2001) Method for the determination of bulk and interface density of states in thin-film transistors. Journal of Applied Physics, 89. pp. 6453-6458. ISSN 0021-8979

Lynch, RJ and Palmer, AC (2001) Development of sensors, probes and imaging techniques for pollutant monitoring in geo-environmental model tests. International Journal of Physical Modelling in Geotechnics, 1. pp. 17-28. ISSN 1346-213X

M

M F, A and K W, J (2001) Classification and choice in product design. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

M P F, S and H R, L and R, A (2001) Modeling of micro-pit evolution in rolling or strip-drawing. Transactions of the ASME: Journal of Tribology, 123. pp. 791-798. ISSN 0742-4787

MacKay, DJC (2001) Erratum: Good error-correcting codes based on very sparse matrices (IEEE transactions on information theory (2001) 5:47). IEEE Transactions on Information Theory, 47. p. 2101. ISSN 0018-9448

MacKay, DJC (2001) Good error-correcting codes based on very sparse matrices (vol 45, pg 339, 1999). IEEE T INFORM THEORY, 47. p. 2101. ISSN 0018-9448

MacKay, DJC and Davey, MC (2001) Evaluation of Gallager codes for short block length and high rate applications. In: UNSPECIFIED pp. 113-130..

MacKay, DJC and Davey, MC (2001) Two small Gallager codes. In: UNSPECIFIED pp. 131-133..

MacMillan, S and Steele, J and Austin, S and Kirby, P and Spence, R (2001) Development and verification of a generic framework for conceptual design. Design Studies, 22. pp. 169-191. ISSN 0142-694X

Maciejowski, JM (2001) MPC: A paradigm shift for automatic control. Proceedings of the International Conference on Systems Science, 1. pp. 133-143.

Maciejowski, JM and Casavola, A and Mosca, E and Angeli, D and Demenkov, MN and Filimonov, NB (2001) Discussion on: 'Variable horizon robust predictive control via adjustable controllability sets' by M. N. Demenkov and N. B. Filimonov. EUR J CONTROL, 7. pp. 605-608. ISSN 0947-3580

Maciejowski, JM and Lemos, JM (2001) Predictive methods in fault-tolerant control. In: Control of Complex Systems. Springer, London, pp. 229-240.

Macmillan, SG (2001) Interdisciplinary design in practice. In: Interdisciplinary design in practice. Inst of Civil Engineers Pub, -.

Macmillan, SG (2001) Interdisciplinary design in practice. In: Interdisciplinary design in practice. Inst of Civil Engineers Pub, -.

Macmillan, SG (2001) Towards an interdisciplinary design process. In: Interdisciplinary design in practice. Inst of Civil Engineers Pub, -.

Madabhushi, SPG and Singh, SK (2001) Behaviour of landfill liners under earthquake loading. In: The 8th International Conference on Civil and Structural Engineering Computing, 2001-9- to -- pp. 293-294..

Madabhushi, SPG and Teymur, B and Haigh, SK and Brennan, AJ (2001) Recent advances in modelling of liquefaction and lateral spreading. In: Proceedings of the International Symposium on Geotechnical Centrifuge Modelling and Networking, 2001-- to --, Padma and Hari Harilela Lecture Theatre (LTC), The Hong Kong University of Science and Technology, Hong Kong.

Mair, RJ and Jardine, FM (2001) Tunnelling methods. In: Building Response to Tunnelling: Case Studies from Construction of the Jubilee Line Extension, London: Volume 1: Projects and Methods. CIRIA Special Publication . Thomas Telford, pp. 127-134.

Mair, RJ and Taylor, RN (2001) Elizabeth House: settlement predictions. In: Building Response to Tunnelling: Case Studies from Construction of the Jubilee Line Extension, London: Volume 1: Projects and Methods. CIRIA Special Publication . Thomas Telford, pp. 195-215.

Mair, RJ and Taylor, RN (2001) Settlement predictions for Neptune, Murdoch and Clegg Houses and adjacent masonry walls. In: Building Response to Tunnelling: Case Studies from Construction of the Jubilee Line Extension, London: Volume 1: Projects and Methods. CIRIA Special Publication . Thomas Telford, pp. 217-228.

Malecki, RE and Rhie, CM and McKinney, RG and Ouyang, H and Syed, SA and Colket, MB and Madabhushi, RK (2001) Application of an advanced CFD-based analysis system to the PW6000 combustor to optimize exit temperature distribution-part I: Description and validation of the analysis tool. Proceedings of the ASME Turbo Expo, 2.

Manolis, IG and Wilkinson, TD and Redmond, MM and Crossland, WA (2001) Beam steering optical switches using LCOS: The ROSES demonstration. In: Boulder Workshop on Liquid Crystals Switching and Telecommunications, 2001-6- to --, Boulder, CO, USA.

Marinelli, C and Bordovsky, M and Sargent, LJ and Gioannini, M and Rorison, JM and Penty, RV and White, IH and Heard, PJ and Benyoucef, M and Kuball, M and Hasnain, G and Takeuchi, T and Schneider, RP (2001) Design and performance analysis of deep-etch air/nitride distributed Bragg reflector gratings for AlInGaN laser diodes. APPL PHYS LETT, 79. pp. 4076-4078. ISSN 0003-6951

Marinelli, C and Sargent, LJ and Bordovsky, M and Wonfor, A and Rorison, JM and Penty, RV and White, IH and Heard, PJ and Benyoucef, M and Kuball, M and Hasnain, G and Schneider, RP (2001) Design and fabrication of air/semiconductor Bragg gratings for short wavelength nitride-based lasers. In: Conference on Lasers and Electro-Optics, CLEO 01, 2001-5-6 to 2001-5-11, Baltimore, MD, USA 82-..

Marinelli, C and Sargent, LJ and Bordovsky, M and Wonfor, A and Rorison, JM and Penty, RV and White, IH and Heard, PJ and Hasnain, G and Schneider, RP (2001) Enhanced-performance operation of InGaN MQW lasers with air/nitride distributed Bragg reflector defined by focused ion beam etching. In: 5th Conference on In-Plane Semiconductor Lasers, 2001-1- to --, San Jose, CA, USA pp. 57-66..

Markaki, AE and Clyne, TW (2001) The effect of cell wall microstructure on the deformation and fracture of aluminium-based foams. Acta Materialia, 49. pp. 1677-1686. ISSN 1359-6454

Martinez, E and Andujar, JL and Polo, MC and Esteve, J and Robertson, J and Milne, WI (2001) Study of the mechanical properties of tetrahedral amorphous carbon films by nanoindentation and nanowear. Diamond and Related Materials, 10. pp. 145-152. ISSN 0925-9635

Massara, AB and Sargent, LJ and Heard, PJ and Penty, RV and White, IH (2001) 10 Gb/s operation of novel single mode, two-contact InGaAsP lasers with low drive current. In: Technical Digest. Summaries of papers presented at the Conference on Lasers and Electro-Optics, CLEO' 01, 2001-5-6 to 2001-5-11, Baltimore, MD, USA pp. 191-192..

Massara, AB and Sargent, LJ and Heard, PJ and Penty, RV and White, IH (2001) 10Gb/s operation of novel single mode, two-contact InGaAsP lasers with low drive current. In: Conference on Lasers and Electro-Optics, CLEO 01, 2001-5-6 to 2001-5-11, Baltimore, MD, USA pp. 191-192..

Massara, AB and Sargent, LJ and Heard, PJ and Penty, RV and White, IH (2001) 10Gb/s single mode operation of two-contact InGaAsP lasers with ultra-low drive current. In: 27th European Conference on Optical Communication 2001, ECOC 01, 2001-9-30 to 2001-10-4, Amsterdam, The Netherlands pp. 406-407..

Massara, AB and Sargent, LJ and Penty, RV and White, IH (2001) High coupling in novel 2D-lattice distributed reflector laser gratings. Conference on Optical Fiber Communication, Technical Digest Series, 54. WDD63/1-WDD63/3.

Massara, AB and Sargent, LJ and Penty, RV and White, IH (2001) High coupling in novel 2D-lattice distributed reflector laser gratings. In: Optical Fiber Communication Conference and Exhibit, 2001, OFC 2001, 2001-3- to --, Anaheim, CA, USA.

Massara, AB and Yang, S and Houle, TJ and Thilakumara, RP and Penty, RV and White, IH (2001) Uncooled, 10Gb/s operation of two-contact InGaAsP lasers with low drive current. Conference on Optical Fiber Communication, Technical Digest Series, 54. WDD72/1-WDD72/3.

Massara, AB and Yang, S and Houle, TJ and Thilakumara, RP and Penty, RV and White, IH (2001) Uncooled, 10 Gb/s operation of two-contact InGaAsP lasers with low drive current. In: Optical Fiber Communication Conference and Exhibit, 2001, OFC 2001, 2001-3- to --, Anaheim, CA, USA.

Matthews, PC and Ahmed, S and Aurisicchio, M (2001) Extracting experience through protocol analysis. In: IEEE 1st International Conference on Data Mining 2001, 2001-11- to --, San Jose, CA, USA.

Matthews, PC and Langdon, PM and Wallace, KM (2001) New techniques for design knowledge exploration: a comparison of three data grouping approaches. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 107-114..

McDowell, GR and Bolton, MD (2001) Micro mechanics of elastic soil. Soils and Foundations, 41. pp. 147-152. ISSN 0385-1621

McFarlane, DC and Chang, Y and Matson, J and Shaw, A (2001) A production responsiveness audit. In: Portland International Conference on Management of Engineering and Technology (PICMET 2001), 2001-7-29 to 2001-8-2, Portland, Oregon.

McFarlane, DC and Chirn, JL (2001) Building holonic systems in today's factories: a migration strategy. Journal of Applied Systems Studies: Special Issue on Holonic and Multi-Agent Systems, 2. ISSN 1466-7738

McFarlane, DC and Gregory, MJ and Thorne, A (2001) E-Manufacturing in Japan. Technical Report. DTI-OSTEMS.

McFarlane, DC and Kollingbaum, M and Matson, J and Valckenaers, P (2001) Development of algorithms for agent-based control of manufacturing flow shops. In: E-systems and E-man for Cybernetics in Cyberspace International Conference, SMC 2001, IEEE International Conference on Systems Man and Cybernetics, 2001-10- to --, Tuscon, AZ, USA pp. 146-151..

McGregor, BM and Chu, DP and Migliorato, P and Durkan, C and Welland, ME and Hasegawa, K and Shimoda, T (2001) Investigation of PZT resistance dependence on excess lead using a low frequency small signal AC response. In: 13th International Symposium on Integrated Ferroelectrics (ISIF 2001), 2001-3- to --, Colorado Springs, Colorado, USA.

McIntosh, AC and Brindley, J and Yang, XS (2001) The effect of large step pressure drops on strained premixed flames. Combustion and Flame, 125. pp. 1207-1216. ISSN 0010-2180

Melo, AF and Clarkson, PJ (2001) Design process planning using a state-action model. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 345-352..

Mendonca, PRS and Wong, KYK and Cipolla, R (2001) Epipolar geometry from profiles under circular motion. IEEE Transactions on Pattern Analysis and Machine Intelligence, 23. pp. 604-616. ISSN 0162-8828

Menkiti, CO and Mair, RJ and Miles, R (2001) Highway tunnel performance during the 1999 Duzce earthquake. In: The 15th International Conference on Soil Mechanics and Geotechnical Engineering, 2001-8- to -- pp. 1365-1368..

Menkiti, CO and Mair, RJ and Miles, R (2001) Tunnelling in complex ground conditions in Bolu, Turkey. In: The Symposium on Underground Construction, 2001-9- to -- pp. 546-548..

Merritt, AS and Muir, RJ (2001) Investigations of lubrication and soil conditioning for tunnelling and pipe jacking in clay soils. In: The Symposium on Underground Construction, 2001-9- to -- pp. 117-127..

Michiels, W and Sepulchre, R and Roose, D (2001) Stability of perturbed delay differential equations and stabilization of nonlinear cascade systems. SIAM JOURNAL ON CONTROL AND OPTIMIZATION, 40. pp. 661-680. ISSN 0363-0129

Middleton, CR (2001) Plastic analysis bridge assessment. Concrete Engineering International, 5. pp. 67-70. ISSN 1460-5856

Migliorato, P and Bavidge, NG and Boero, M and Shimoda, T (2001) Device physics of Poly-Si TFTs: trap-assisted G-R processes and transient effects. In: International Workshop on Active Matrix Liquid Crystal Displays (AM-LCD'01), 2001-7-11 to 2001-7-13, Tokyo, Japan p.195-..

Migliorato, P and Tam, SWB and Lui, OKB and Shimoda, T (2001) Determination of the surface potential in thin-film transistors from C-V measurements. Journal of Applied Physics, 89. pp. 6449-6452. ISSN 0021-8979

Mihaila, A and Udrea, F and Azar, R and Brezeanu, G (2001) Analysis of static and dynamic behaviour of SiC and Si devices connected in cascode configuration. In: The 24th International Semiconductor Conference; CAS 2001, 2001-10- to --, Sinaia, Romania pp. 333-336..

Mihalia, A and Udrea, F and Sheng, K and Azar, R (2001) Mixed-mode investigation of hybrid SiC/Si cascode configurations. In: The International Semiconductor Device Research Symposium, 2001-12- to --, Washington, USA pp. 575-578..

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2001) Time-resolved vane-rotor-vane interaction in a transonic one-and-a-half stage turbine. In: UNSPECIFIED pp. 675-685..

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2001) Time-resolved vane-rotor-vane interaction in a transonic one-and-a-half stage turbine. In: 4th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics (Euroturbo 4), 2001-3-20 to 2001-3-23, Florence, Italy pp. 937-949..

Miller, RJ and Moss, RW and Ainsworth, RW and Harvey, NW (2001) Time-resolved vane-rotor-vane interaction in a transonic one-and-a-half stage turbine. Proceedings of Institution of Mechanical Engineers, PT A: Journal of Power and Energy, 215. pp. 675-685. ISSN 0957-6509

Mills, JF and Platts, KW and Bourne, MCS (2001) Applying resource-based theory: methods, outcomes and utility for managers. In: 8th International European Operations Management Association Conference, 2001-6-3 to 2001-6-5, Bath, UK.

Mills, JF and Platts, KW and Bourne, MCS (2001) Resource-based strategising: the analysis of a service strength. In: EIASM Workshop on Micro Strategy and Strategising, 2001-2-1 to 2001-2-3, Brussels, Belgium pp. 910-930..

Milne, WI and Ilie, A and Cui, JB and Ferrari, AC and Robertson, J (2001) Field emission from nano-cluster carbon films. Diamond and Related Materials, 10. pp. 260-264. ISSN 0925-9635

Milne, WI and Ilie, A and Cui, JB and Robertson, J (2001) Field emission from nano-cluster carbon films. Diamond and Related Materials, 10. pp. 260-264. ISSN 0925-9635

Milne, WI and Teo, KBK and Chhowalla, M and Amaratunga, GAJ and Yuan, J and Robertson, J and Legagneax, P and Pribat, D and Bruenger, W and Trautmann, V (2001) Investigating carbon materials for use as the electron emission source in a parallel electron-beam lithography system. Current Applied Physics, 1. pp. 317-320. ISSN 1567-1739

Milne, WI and Teo, KBK and Chhowalla, M and Amaratunga, GAJ and Yuan, J and Robertson, J and Legagneux, P and Pirio, G and Bouzehouane, K and Pribat, D and Bruenger, W and Trautmann, C (2001) Investigating carbon materials for use as the electron emission source in a parallel electron-beam lithography system. Current Applied Physics, 1. pp. 317-320. ISSN 1567-1739

Milne, WI and Teo, KBK and Chhowalla, M and Amaratunga, GAJ and Yuan, J and Robertson, J and Legagneux, P and Pirio, G and Pribat, D and Bouzehouane, K and Bruenger, W and Trautmann, C (2001) Carbon films for use as the electron source in a parallel e-beam lithography system. In: UNSPECIFIED pp. 235-247..

Misjak, F and Lengyel, M and Erdi, P (2001) Episodic memory and cognitive map in a rate model network of the rat hippocampus. In: The International Conference on Artificial Neural Networks - ICANN 2001, 2001-8-21 to 2001-8-25 pp. 1135-1140..

Morais, MM and Burgoyne, CJ (2001) Ductility of sections prestressed with FRP. In: The 5th International Conference on Fibre-Reinforced Plastics for Reinforced Concrete Structures, FRPRCS-5, 2001-7-16 to 2001-7-18, Cambridge, UK pp. 731-740..

Morais, MM and Burgoyne, CJ (2001) Energy dissipation in sections prestressed with FRP tendons. In: The International Conference on Composite in Construction (CCC 2001), 2001-10- to --, Porto, Portugal pp. 421-426..

Morgan, CN and Yu, S and Penty, RV and White, IH (2001) Highly compact, low loss silica based 2DIO wavelength filter for WDM datacommunications networks. In: 27th European Conference on Optical Communication 2001, ECOC 01, 2001-9-30 to 2001-10-4, Amsterdam, The Netherlands pp. 26-27..

Morgan, R and Papworth, A and Sutcliffe, CJ and O'Neill, W (2001) Fabrication of metallic objects by direct metal laser re-melting (DMLR) of stainless steel powders. Proceedings of the 12th Solid Freeform Fabrication Symposium. ISSN 1053-2153

Morgan, R and Papworth, AJ and Sutcliffe, C and Fox, P and O'Neill, W (2001) Direct metal laser re-melting (DMLR) of 316L stainless steel powder. Part 1:Analysis of thin wall structures. In: Proceedings of the 12th Annual Solid Freeform Fabrication Symposium, 2001-8-6 to 2001-8-8, Austin, TX.

Morgan, R and Sutcliffe, C and Papworth, A and O'Neill, W (2001) Direct metal laser re-melting of 316L stainless steel powder part 2: analysis of cubic primitives. In: 12th Solid Freeform Fabrication Symposium, 2001-8- to --, Austin, Texas pp. 283-295..

Morgan, R and Sutcliffe, C and Papworth, A and O'Neill, W (2001) Fabrication of metal components by direct metal laser re-melting (DMLR). In: Proceedings of the 12th Annual Solid Freeform Fabrication Symposium 2001, 2001-8-6 to 2001-8-8, Austin, TX.

Morgan, R and Sutcliffe, CJ and O'Neill, W (2001) Experimental investigation of nanosecond pulsed Nd : YAG laser re-melted pre-placed powder beds. Rapid Prototyping Journal, 7. pp. 159-172. ISSN 1355-2546

Morgenthal, G and McRobie, FA (2001) Aeroelastic bridge response analysis using a quasi-3D extension of the discrete vortex method. In: 5th Asia-Pacific Conference on Wind Engineering (APCWE 5), 2001-- to --, Kyoto, Japan.

Morgenthal, G and McRobie, FA (2001) Lock-in prediction for bridge decks using a Discrete Vortex Method. In: The 1st International Conference on Conference on Computational Fluid and Solid Mechanics, 2001-6-12 to 2001-6-15 pp. 1329-1333..

Morgenthal, G and McRobie, FA and Jang, SJ (2001) Numerical models for bridge deck aerodynamics and their validation. In: The IABSE Conference on Cable Supported Bridges: Challenging Technical Limits, 2001-6-12 to 2001-6-14, Seoul, Korea pp. 188-189..

Morley, CT and Denton, SR (2001) Modified plasticity theory for reinforced concrete slab structures of limited ductility. In: International Conference on Structural Engineering Mechanics and Computation, 2001-4-2 to 2001-4-4, Cape Town, South Africa pp. 1523-1530..

Morrison, NA and Rodil, SE and Robertson, J and Milne, WI (2001) Chemical sputtering of ta-C: Implications for the deposition of carbon nitride. Journal of Applied Physics, 89. pp. 5754-5759. ISSN 0021-8979

Morrison, NA and Rodil, SE and Robertson, J and Milne, WI (2001) Chemical sputtering of ta-C: Implications for the deposition of carbon nitride. Journal of Applied Physics, 89. pp. 5754-5759. ISSN 0021-8979

Moultrie, J (2001) Developing a design audit tool.

Moultrie, J and Fraser, P and Holdway, R and Clarkson, PJ (2001) Better by design: development of a framework to guide design improvement in SMEs. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 3-10..

Musgrave, B and Coles, MJ and Perkins, SP and Coles, HJ (2001) Enhanced flexoelectric switching behaviour in the chiral nematic phase. MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 366. pp. 735-742. ISSN 1058-725X

Musgrave, B and Coles, MJ and Perkins, SP and Coles, HJ (2001) Enhanced flexoelectric switching behaviour in the chiral nematic phase. Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals, 366. pp. 735-742. ISSN 1058-725X

N

Nagaune, F and Miyasaka, T and Tagami, S and Shigekane, H and Kirihata, H and Palmer, PR (2001) Short on-pulse reverse recovery behavior of free wheeling diode. In: The 13th International Symposium on Power Semiconductor Devices, -- to -- pp. 203-206..

Nakagawa, K and Soga, K and Mitchell, JK (2001) Closure: Observation of Biot compressional wave of the second kind in granular soils. Geotechnique, 51. pp. 85-89. ISSN 0016-8505

Nandhakumar, J and Jones, M (2001) Accounting for time: managing time in project-based teamworking. Accounting, Organizations and Society, 26. pp. 193-214. ISSN 0361-3682

Neely, A and Filippini, R and Forza, C and Vinelli, A and Hii, J (2001) A framework for analysing business performance, firm innovation and related contextual factors: Perceptions of managers and policy makers in two European regions. Integrated Manufacturing Systems, 12. pp. 114-124. ISSN 0957-6061

Ng, CW (2001) An evaluation of a new product data model. Masters thesis, UNSPECIFIED.

Ng, R and Udrea, F and Sheng, K and Amaratunga, GAJ (2001) A study of the CoolMOS integral diode: analysis and optimisation. In: The 24th International Semiconductor Conference; CAS 2001, 2001-10- to --, Sinaia, Romania pp. 461-464..

Ng, R and Udrea, F and Sheng, K and Ueno, K and Amaratunga, GAJ and Nishiura, M (2001) Lateral unbalanced super junction (USJ)/3D-RESURF for high breakdown voltage on SOI. In: The 11th IEEE International Symposium on Power Semiconductor Devices and ICs (ISPSD), 2001-6- to --, Osaka, Japan pp. 395-398..

Nickels, TB (2001) The mean velocity profile for wall-bounded flows at low Reynolds number. In: 14th Australasian Fluid Mechanics Conference, 2001-12-9 to 2001-12-14, Adelaide, Australia.

Nickels, TB and Marusic, I (2001) On the different contributions of coherent structures to the spectra of a turbulent round jet and a turbulent boundary layer. Journal of Fluid Mechanics, 448. pp. 367-385. ISSN 0022-1120

Nidamarti, S and Chakrabarti, A and Bligh, TP (2001) Improving requirement satisfaction ability of the designer. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 237-244..

Ning, F and Xu, L (2001) Application of GMRES method to two-dimensional steady turbulence flows. Acta Mechanica Sinica, 33. ISSN 0567-7718

Ning, F and Xu, L (2001) Application of one equation Spalart-Allmaras turbulence model in the numerical simulations of internal flows. Chinese Journal of Engineering Thermophysics, 22. ISSN 0253-231X

Ning, F and Xu, L (2001) Numerical investigation of transonic compressor rotor flow using an implicit 3D flow solver with one-equation Spalart-Allmaras turbulence model. In: ASME Turbo Expo, Power for Land, Sea and Air, 2001-6-4 to 2001-6-7, New Orleans, Louisiana, USA.

Nock, H and Young, SJ (2001) A comparison of exact and approximate algorithms for decoding and training loosely coupled HMMs. In: The Institute of Acoustics Workshop on Innovation in Speech Processing (WISP 2001), 2001-4- to -- pp. 47-62..

Noot, C and Coles, MJ and Musgrave, B and Perkins, SP and Coles, HJ (2001) The flexoelectric behaviour of a hypertwisted chiral nematic liquid crystal. Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals, 366. pp. 725-733. ISSN 1058-725X

O

O'Brien, DC and Faulkner, GE and Jim, K and Zyambo, EB and Edwards, DJ and Whitehead, M and Stavrinou, P and Parry, G and Bellon, J and Sibley, MJ and Lalithambika, VA and Joyner, VM and Samsudin, RJ and Atkinson, R and Holburn, DM and Mears, RJ (2001) High speed integrated optical wireless transceivers for in-building optical LANS. In: UNSPECIFIED pp. 104-114..

O'Brien, DC and Faulkner, GE and Jim, K and Zyambo, EB and Edwards, DJ and Whitehead, M and Stavrinou, P and Parry, G and Bellon, J and Sibley, MJ and Lalithambika, VA and Joyner, VM and Samsudin, RJ and Holburn, DM and Mears, RJ (2001) A high-speed integrated optical wireless system demonstrator. In: UNSPECIFIED pp. 145-153..

O'Donovan, BD (2001) Building better design process models.

O'Neill, W (2001) Experimental and theoretical analysis of slot generation by laser and high speed gas vortex. Proceedings of IMechE (B) Engineering Manufacture, 215. pp. 1-14. ISSN 0954-4054

O'Neill, W and Elboughey, A and Steen, WM and Volgsanger, M (2001) Selective removal of steel by a laser slotting process. Proceedings of the Institute of Mechanical Engineers Journal of Engineering Manufacture, Part B, 215. pp. 1051-1064. ISSN 0954-4054

O'Neill, W and Voglsanger, M and Elboughey, A and Steen, WM (2001) On the selective removal of steel by laser-assisted vortex machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215. pp. 1051-1064. ISSN 0954-4054

Okano, K and Yamada, T and Sawabe, A and Koizumi, S and Itoh, J and Amaratunga, GAJ (2001) Metal-insulator-vacuum type electron emission from N-containing chemical vapor deposited diamond. APPL PHYS LETT, 79. pp. 275-277. ISSN 0003-6951

Olurin, OB and Fleck, NA and Ashby, MF (2001) Tensile and compressive failure of notched cellular foams. ADV ENG MATER, 3. pp. 55-58. ISSN 1438-1656

Olurin, OB and McCullough, KY and Fleck, NA and Ashby, MF (2001) Fatigue crack propagation in aluminium alloy foams. International Journal of Fatigue, 23. pp. 375-382. ISSN 0142-1123

Orban, G and Kiss, T and Lengyel, M and Erdi, P (2001) Hippocampal rhythm generation: gamma-related theta-frequency resonance in CA3 interneurons. Biological Cybernetics, 84. pp. 123-132. ISSN 0340-1200

Orton, MR and Fitzgerald, WJ (2001) A Bayesian approach to tracking multiple targets using sensor arrays and particle filters. Technical Report. University of Cambridge: Department of Engineering, Cambridge, UK.

Oyen Tiesma, M and Cook, RF (2001) Technique for estimating the fracture resistance of cultured neocartilage. Journal of Materials Science: Materials in Medicine, 12. pp. 327-332. ISSN 0957-4530

Oyen-Tiesma, M and Toivola, YA and Cook, RF (2001) Load-displacement behavior during sharp indentation of viscous-elastic-plastic materials. Materials Research Society Symposium - Proceedings, 649. Q1.5.1-Q1.5.6. ISSN 0272-9172

P

Palmer, AC (2001) If global warming is real, how should humankind respond? Oil and Gas Journal, 99. pp. 24-26.

Palmer, PR (2001) Concurrent design of power semiconductor devices. In: University of Cambridge Thermal Materials Workshop, 2001-5- to --, Cambridge, UK.

Palmer, PR and Abu Khaizaran, MS (2001) The series connection of IGBTs in a current source inverter. IEEE Power Electronics Specialists Conference, 1. pp. 170-175. ISSN 0275-9306

Palmer, PR and Joyce, JC and Eng, PY and Hudgins, J and Santi, E and Dougal, R (2001) Circuit simulator models for the diode and IGBT with full temperature dependent features. IEEE Power Electronics Specialists Conference, 4. pp. 2171-2177. ISSN 0275-9306

Papachristos, VD and Panagopoulos, CN and Christoffersen, LW and Markaki, AE (2001) Youngâs modulus, hardness and scratch adhesion of Ni-P-W multilayered alloy coating produced by pulse plating. Thin Solid Films, 396. pp. 173-182. ISSN 0040-6090

Papworth, AJ and Chhowalla, M and Alexandrou, I and Ducati, C and Kiely, CJ and Amaratunga, GAJ (2001) STEM and HREM analysis of vertically aligned carbon nanotubes. In: UNSPECIFIED pp. 327-330..

Parks, GT and Li, J and Balazs, ME and Miller, I (2001) An empirical investigation of elitism in multi-objective genetic algorithms. Foundations of Computing and Decision Sciences, 26. pp. 51-74. ISSN 0867-6356

Pathirana, GPV and Udrea, F and Rusu, A (2001) Novel 3D SOI RF power MOSFET. In: UNSPECIFIED pp. 241-244..

Peake, N (2001) Nonlinear stability of a fluid-loaded elastic plate with mean flow. Journal of Fluid Mechanics, 434. pp. 101-118. ISSN 0022-1120

Peake, N (2001) Nonlinear stability of a fluid-loaded elastic plate with mean flow. J FLUID MECH, 434. pp. 101-118. ISSN 0022-1120

Peake, N and Cooper, AJ (2001) Acoustic propagation in ducts with slowly varying elliptic cross-section. J SOUND VIB, 243. pp. 381-401. ISSN 0022-460X

Peake, N and Cooper, AJ (2001) Acoustic propagation in ducts with slowly-varying elliptic cross-section. Journal of Sound and Vibration, 243. pp. 381-401. ISSN 0022-460X

Peake, N and Sorokin, S (2001) On the behaviour of fluid-loaded sandwich panels with mean flow. Journal of Sound and Vibration, 242. pp. 597-617. ISSN 0022-460X

Peake, N and Sorokin, SV (2001) On the behaviour of fluid-loaded sandwich panels with mean flow. J SOUND VIB, 242. pp. 597-617. ISSN 0022-460X

Pearson, J and Moore, DF and Milne, WI and Taylor, AJW and Elmes, SA and Davies, M (2001) Microfabrication and application of reservoir pins for liquid transfer in biotechnology. Proceedings of SPIE - The International Society for Optical Engineering, 4407. pp. 281-294. ISSN 0277-786X

Peerlings, RHJ and Fleck, NA (2001) Enriched effective modelling of elastic periodic composites. In: ECCM 2001: European Conference on Computational Mechanics, 2001-6-26 to 2001-6-29, Cracow, Poland pp. 336-340..

Peerlings, RHJ and Fleck, NA (2001) Numerical analysis of strain gradient effects in periodic media. Journal de Physique IV, 11. pp. 154-160. ISSN 1155-4339

Peerlings, RHJ and Fleck, NA (2001) Numerical analysis of strain gradient effects in periodic media. In: UNSPECIFIED pp. 153-160..

Pellegrino, S (2001) Collapsible rib-tensioned surface (CRTS) technology development: final report. Technical Report. Cambridge University Department of Engineering, Cambridge, UK.

Pellegrino, S and Lai, CY (2001) Umbrella-type furlable reflector based on tension-truss concept. In: The 42nd AIAA Conference on Structures, Structural Dynamics, and Materials Conference, 2001-4- to -- pp. 2228-2237..

Pellegrino, S and Tibbert, G (2001) Furlable reflector concept for small satellites. In: The 42nd AIAA Conference on Structures, Structural Dynamics, and Materials Conference, 2001-4- to -- pp. 594-604..

Perkins, SP and Shoosmith, DE and Coles, HJ (2001) Novel room temperature fluorinated ferroelectric organosiloxane liquid crystal mixtures. MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 364. pp. 943-950. ISSN 1058-725X

Perry, MA and Koltsov, DK and Flack, TJ and Welland, ME (2001) A new numerical method in micromagnetics. In: International Conference on Magnetism and Magnetic Materials, 2001-11- to --, Seattle, WA, US.

Perwass, CUB and Lasenby, J (2001) 3D-Reconstruction from vanishing points. In: Geometric Computing with Clifford Algebras: Theoretical Foundations and Applications in Computer Vision and Robotics. Springer, pp. 371-392.

Perwass, CUB and Lasenby, J (2001) A unified description of multiple view geometry. In: Geometric Computing with Clifford Algebras: Theoretical Foundations and Applications in Computer Vision and Robotics. Springer, pp. 337-369.

Phaal, R and Farrukh, CJP and Probert, DR (2001) Characterisation of technology roadmaps: purpose and format. In: Technology Management in the Knowledge Era. Institute of Electrical and Electronics Engineers & Portland International Centre for Management of Engineering and Technology, pp. 367-374.

Phaal, R and Farrukh, CJP and Probert, DR (2001) Characterisation of technology roadmaps: purpose and format. In: Portland International Conference on Management of Engineering and Technology (PICMET 2001), 2001-7-29 to 2001-8-2, Portland, OR, US.

Phaal, R and Farrukh, CJP and Probert, DR (2001) Structuring a systematic approach to technology management: concepts and practice. In: 10th International Association for Management of Technology (IAMOT 2001), 2001-3-19 to 2001-3-22, Lausanne, Switzerland.

Phaal, R and Farrukh, CJP and Probert, DR (2001) Technology management process assessment: a case study. International Journal of Operations & Production Management, 21. pp. 1116-1132. ISSN 0144-3577

Pivnenko, MN and Vashchenko, VV and Krivoshey, AI and Kutulya, LA and Goodby, JW (2001) New chiral ether derivatives of 2-arylidene-p-menthane-3-ones as components of induced ferroelectric systems. Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals, 364. pp. 557-565. ISSN 1058-725X

Platts, KW and Bourne, MCS and Elliott, R (2001) Manufacturing performance measurement. In: International Encyclopedia of Business and Management. Thomson Learning, -.

Platts, MJ (2001) Developing competence and trust: maintaining the heart of a profession. In: 8th Annual Conference of the Australian Asociation for Professional and Applied Ethics, 2001-9-27 to 2001-9-29, Adelaide, Australia.

Platts, MJ (2001) Knowledge in action: response to Jos Kessels. Reason in Practice, 1. pp. 83-4. ISSN 1473-589X

Platts, MJ (2001) Lean design. In: 25th British Investment Casting Trade Association (BICTA) Conference 2001, 2001-6-10 to 2001-6-12, Cheltenham, UK.

Platts, MJ (2001) Verbal and numerical decision analysis: parallels with sketching and drawing. Journal of Multi'Criteria Decision Analysis, 10. 173-. ISSN 1057-9214

Popescu, A and Udrea, F and Sheng, K and Garner, D and Lim, HT and Ng, R and Khoo, G and Milne, WI (2001) Advanced RESURF concepts in SOI devices - optimisation and fabrication. In: 10th International Symposium on Silicon-on-Insulator Technology and Devices, 2001-3- to --, Washington, DC, USA pp. 325-330..

Popov, AA and Thompson, JMT and McRobie, FA (2001) Chaotic energy exchange through auto-parametric resonance in cylindrical shells. Journal of Sound and Vibration, 248. pp. 395-412. ISSN 0022-460X

Povey, D and Woodland, PC (2001) Improved discriminative training techniques for large vocabulary continuous speech recognition. In: IEEE international Conference on Acoustics Speech and Signal Processing, 2001-5-7 to 2001-5-11, Salt Lake City, Utah pp. 45-48..

Prager, RW and Gee, AH and Treece, G and Berman, LH (2001) Freehand 3D ultrasound without voxels: volume measurement and visualisation using the Stradx system. In: Proceedings of the Conference on Ultrasonics International, 2001-7-2 to 2001-7-5, Delft, Netherlands.

Prager, RW and Gee, AH and Treece, GM and Berman, LH (2001) Analysis of speckle in ultrasound images using fractional-order statistics of the homodyned k-distribuction. In: Proceedings of the Conference on Ultrasonics International, 2001-7-2 to 2001-7-5, Delft, Netherlands.

Prager, RW and Gee, AH and Treece, GM and Berman, LH (2001) Speckle detection in ultrasound images using first order statistics. Technical Report. Cambridge University, Cambridge, UK.

Probert, DR and Canez, LE and Platts, KW (2001) Technology transfer and succession planning: The relevance of make-or-buy analysis. In: UNSPECIFIED pp. 439-443..

Probert, DR and Canez, LE and Platts, KW (2001) Technology transfer and succession planning: the relevance of make-or-buy analysis. In: Portland International Conference on Management of Engineering and Technology (PICMET 2001), 2001-7-29 to 2001-8-2, Portland, OR, USA pp. 253-254..

Punskaya, E and Andrieu, C and Doucet, A and Fitzgerald, WJ (2001) Particle filtering for demodulation in fading channels with non-Gaussian additive noise. IEEE Transactions on Communications, 49. pp. 579-582. ISSN 0090-6778

Punskaya, E and Andrieu, C and Doucet, A and Fitzgerald, WJ (2001) Particle filtering for multiuser detection in fading CDMA channels. In: UNSPECIFIED pp. 38-41..

R

Racine, B and Ferrari, AC and Morrison, NA and Hutchings, I and Milne, WI and Robertson, J (2001) Properties of amorphous carbon–silicon alloys deposited by a high plasma density source. Journal of Applied Physics, 90. pp. 5002-5012. ISSN 0021-8979

Racine, B and Ferrari, AC and Morrison, NA and Hutchings, I and Milne, WI and Robertson, J (2001) Properties of amorphous carbon-silicon alloys deposited by a high plasma density source. Journal of Applied Physics, 90. pp. 5002-5012. ISSN 0021-8979

Racine, B and Ferrari, AC and Morrison, NA and Hutchings, I and Milne, WI and Robertson, J (2001) Properties of amorphous carbon-silicon alloys deposited by a high plasma density source. Journal of Applied Physics, 90. pp. 5002-5012. ISSN 0021-8979

Raman, S and Ahn, SH and Lawrence, NA and Davey, AB and Wilkinson, TD and Crossland, WA (2001) Design of a tiled PL-LCD large-area display. In: Novel Optical Systems Design and Optimization IV. Proceedings of SPIE, 4442 . SPIE: The International Society for Optical Engineering, pp. 6-14.

Ramesh, ON and Hodson, HP (2001) Transition initiation by unsteadiness and roughness in a high-lift turbine blade: an experimental study. In: ERCOFTAC/SIG-33 Symposium on Global Flow Instability and Control, 2001-9-22 to 2001-9-26, Crete, Greece.

Ramesh, ON and Hodson, HP and Harvey, NW (2001) Separation control in ultra-high lift aerofoils by unsteadiness and surface roughness. In: International symposium on 15th International Symposium on Air breathing Engines, 2001-9-3 to 2001-9-7, Bangalore, India.

Rangel, C and Wild, DL and Falciani, F and Ghahramani, Z (2001) Modelling biological responses using gene expression profiling and linear dynamical systems. In: The 2nd International Conference on Systems Biology: The Future of Biology in the 21st Century (ICSB), 2001-11-4 to 2001-11-7, California, US pp. 248-256..

Rashed, AM and Williams, KA and Penty, RV and White, IH (2001) Finite difference beam propagation model for tapered waveguide with intracavity lens. In: 9th Conference on Physics and Simulation of Optoelectronic Devices, 2001-1-22 to 2001-1-25, San Jose, California, USA pp. 602-609..

Rashid, R and Flewitt, AJ and Robertson, J and Milne, WI (2001) High quality growth of SiO2 at 80oC by electron cyclotron resonance (ECR) for thin film transistors. In: Advanced Materials and Devices for Large-Area Electronics Symposium, 2001-4- to --, San Francisco, CA, US pp. 335-340..

Rashid, R and Flewitt, AJ and Robertson, J and Milne, WI (2001) Low temperature growth of high quality SiO2 at less that 100oC by ECR-PECVD for TFTs. In: The 1st International Semiconductor Technology Conference, 2001-5- to --, Shanghai, China pp. 185-195..

Rasmussen, CE and Ghahramani, Z (2001) Occam's razor. In: 14th Annual Conference on Advances on Neural Information Processing Systems, NIPS 2000, 2000-11- to --, Denver, CO, US pp. 294-300..

Ratnam, S and Soga, K and Mair, RJ and Whittle, R and Tedd, P (2001) An in situ permeability measurement technique for cut-off walls using the Cambridge self boring pressuremeter. In: The 15th International Conference on Soil Mechanics and Geotechnical Engineering (XVth ICSMGE) v.1, 2001-8- to -- pp. 491-494..

Ratnam, S and Soga, K and Mair, RJ and Whittle, RW and Tedd, P (2001) Permeability measurement using the self boring pressuremeter. In: International Conference on In Situ Measurement of Soil Properties and Case Histories, 2001-5- to --, Bali, Indonesia pp. 667-672..

Ratnam, S and Soga, K and Whittle, R (2001) Revisiting Hvorslev's intake factors using the finite element method. Geotechnique, 51. pp. 641-645. ISSN 0016-8505

Ratti, C and Di Sabatino, S and Caton, F and Britter, RE and Brown, M and Burian, S (2001) Analysis of 3-D urban databases with respect to the pollution dispersion for a number of European and American cities. In: 3rd International Conference on Urban Air Quality, 2001-3-19 to 2001-3-23, Loutraki, Greece -..

Redanz, P and Fleck, NA (2001) Discrete element modelling of compaction of cylindrical powder particles. In: UNSPECIFIED pp. 293-298..

Redanz, P and Fleck, NA (2001) The compaction of a random distribution of metal cylinders by the discrete element method. Acta Materialia, 49. pp. 4325-4335. ISSN 1359-6454

Reeves, TH and Kingsbury, NG (2001) R-D quantisation of complex coefficients in zerotree coding. In: The 11th International Workshop on Statistical Signal Processing, 2001-8- to -- pp. 480-483..

Reinshcke, J and Cantoni, M and Smith, MC (2001) A robust control framework for linear, time-invariant, spatially distributed systems. SIAM Journal on Control and Optimization, 40. pp. 610-627. ISSN 0363-0129

Reinshcke, J and Cantoni, M and Smith, MC (2001) A robust control framework for linear, time-invariant, spatially distributed systems. SIAM Journal on Control and Optimization, 40. pp. 610-627. ISSN 0363-0129

Remmers, JJC and Wells, GN and De Borst, R (2001) Analysis of delamination growth with discontinuous finite elements. In: 2nd European Conference on Computational Mechanics, ECCM'01, 2001-6-26 to 2001-6-29, Cracow, Poland.

Remnant, AM and Perkins, SP and Coles, HJ (2001) Photoisomerising effects in nitroazo ferroelectric dye guest host systems. MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 366. pp. 751-760. ISSN 1058-725X

Remnant, AM and Perkins, SP and Coles, HJ (2001) Photoisomerising effects in nitroazo flexoelectric dimeric nematic systems. Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals, 366. pp. 761-769. ISSN 1058-725X

Renardy, M and Renardy, Y and Li, J (2001) Numerical simulation of moving contact line problems using a volume-of-fluid method. Journal of Computational Physics, 171. pp. 243-263. ISSN 0021-9991

Renardy, YY and Li, J (2001) Merging of drops to form bamboo waves. International Journal of Multiphase Flow, 27. pp. 753-763. ISSN 0301-9322

Ringer, MA and Drummond, TW and Lasenby, J (2001) Using occlusions to aid position estimation for visual motion capture. In: 20th International Conference on Computer Vision and Pattern Recognition (CVPR 2001), 2001-12-11 to 2001-12-13, Kauai, HI, US pp. 464-469..

Robertson, D and Bolton, MD (2001) DEM simulations of crushable grains and soils. In: 4th International Conference on Micromechanics of Granular Media Powders and Grains, 2001-5-21 to 2001-5-25, Sendai, Japan pp. 623-626..

Robertson, J (2001) Defects in diamond-like carbon. Physica Status Solidi A - Applied Reasearch, 186. pp. 177-185. ISSN 0031-8965

Robertson, J (2001) Schottky barrier heights and band offsets of high-K dielectrics. Integrated Ferroelectrics, 32. pp. 251-258. ISSN 1058-4587

Robertson, J (2001) Schottky barrier heights and band offsets of high-K dielectrics. In: UNSPECIFIED pp. 943-950..

Robertson, J (2001) Thermodynamic model of the role of Hydrogen dilution in plasma deposition of microcrystalline silicon. In: Amorphous and Heterogeneous Silicon-Based Films, Symposium A, Materials Research Society Spring Meeting 2001, 2001-4- to --, San Francisco, CA, USA A1.5-..

Robertson, J (2001) Ultrathin carbon coatings for magnetic storage technology. Thin Solid Films, 383. pp. 81-88. ISSN 0040-6090

Rodgers, PA and Caldwell, NHM and Clarkson, PJ and Huxor, AP (2001) The management of concept design knowledge in modern product development organizations. International Journal of Computer Integrated Manufacturing, 14. pp. 108-115. ISSN 0951-192X

Rodgers, PA and Caldwell, NHM and Huxor, AP (2001) An internet-based approach to the capture and reuse of knowledge in design. In: Industrial Knowledge Management: A Micro-Level Approach. Springer-Verlag, London, UK, pp. 249-263.

Rodil, S and Milne, WI and Robertson, J and Brown, LM (2001) Dual ion plasma-beam sources used to maximise sp^3 C–C bonds in carbon nitride. Diamond and Related Materials, 10. pp. 1125-1131. ISSN 0925-9635

Rodil, SE and Ferrari, AC and Robertson, J and Milne, WI (2001) Raman and infrared modes of hydrogenated amorphous carbon nitride. Journal of Applied Physics, 89. pp. 5425-5430. ISSN 0021-8979

Rodil, SE and Ferrari, AC and Robertson, J and Milne, WI (2001) Raman and infrared modes of hydrogenated amorphous carbon nitride. Journal of Applied Physics, 89. pp. 5425-5430. ISSN 0021-8979

Rosales, R and Stark, JA and Fitzgerald, WJ and Hladky, SB (2001) Bayesian restoration of ion channel records using hidden Markov models. Biophysical Journal, 80. pp. 1088-1103. ISSN 0006-3495

Rosales, R and Stark, JA and Fitzgerald, WJ and Hladky, SB (2001) Bayesian restoration of ion channel records using hidden Markov models. Biophysical Journal, 80. pp. 1088-1103. ISSN 0006-3495

Rosales, R and Stark, JA and Fitzgerald, WJ and Hladky, SB (2001) Bayesian restoration of ion channel records using hidden Markov models. BIOPHYS J, 80. pp. 1088-1103. ISSN 0006-3495

Rosti, AV and Gales, MJF (2001) Generalised linear Gaussian models. Technical Report. Cambridge University, Cambridge, UK.

Roweis, ST and Ghahramani, Z (2001) Learning nonlinear dynamical systems using the expectation-maximization algorithm. In: Kalman Filtering and Neural Networks. Wiley and Sons, pp. 175-220.

Roychowdhury, DG and Das, SK and Sundararajan, TS and Tucker, PG (2001) Development of a finite volume non-orthogonal, collocated grid based solution algorithm for solution of incompressible N-S equations in complex geometries. NAFEMS International Journal of CFD Case Studies, 3. pp. 83-108.

Roychowdhury, DG and Tucker, PG and Rayner, D (2001) Prediction of oscillatory flow in a sharp 180 degree bend. In: ICFD, Conference on Numerical Methods for Fluid Dynamics, 2001-3-26 to 2001-3-29, University of Oxford, England -..

Rupesinghe, NL and Chhowalla, M and Teo, KBK and Amaratunga, GAJ (2001) Field emission vacuum power switch using vertically aligned carbon nanotubes. In: UNSPECIFIED pp. 3-4..

Russell, MJ and Shercliff, HR and Threadgill, PL (2001) Development and application of an analytical process model for friction stir welding. In: Automotive Aluminum 2001: a Conference of the TMS Annual Meeting, 2001-2- to -- pp. 225-234..

S

S E, GDC and K W, P and A, F (2001) Advanced manufacturing technology selection: a strategic approach. In: 11th Brazilian Conference on Production Engineering, 2001-8-11 to 2001-8-14, Salvador, Brazil.

Sano, N and Wang, H and Chhowalla, M and Alexandrou, I and Amaratunga, GA (2001) Synthesis of carbon 'onions' in water. Nature, 414. pp. 506-507. ISSN 0028-0836

Sano, N and Wang, H and Chhowalla, M and Alexandrou, I and Amaratunga, GAJ (2001) Nanotechnology - Synthesis of carbon 'onions' in water. NATURE, 414. pp. 506-507. ISSN 0028-0836

Santi, E and Caiafa, A and Kang, X and Hudgins, JL and Palmer, PR and Goodwine, D and Monti, A (2001) Temperature effects on trench-gate IGBTs. In: IEEE Industry Applications Conference, 2001, 2001-9-30 to 2001-10-4, Chicago, IL, USA pp. 1931-1937..

Sargent, LJ and Massara, AB and Giovanni, M and Yong, J and Heard, PJ and Penty, RV and White, IH (2001) Investigation of 2D-lattice distributed reflector lasers. In: The 14th Annual Meeting of the IEEE Lasers and Electro-Optics Society, 2001-11-12 to 2001-11-13, San Diego, CA, USA pp. 275-276..

Sasaki, K and Burstein, GT and Hutchings, IM (2001) Improving the tribological properties of stainless steel surfaces by novel electrochemical processing. Proceedings of JAST Tribology Conference, 2. pp. 967-972. ISSN 0919-6005

Saxena, V and Williams, KA and Penty, RV and White, IH (2001) Ultrafast all-optical regeneration using a simple SOA/DFB laser device. In: 2nd Conference on WDM and Photonic Switching Devices for Network Applications, 2001-1- to --, San Jose, CA, USA pp. 74-77..

Scheffler, K and Young, SJ (2001) Automatic learning of dialogue strategy using dialogue simulation and reinforcement learning. In: The Conference on Empirical Methods in Natural Language Processing (NAACL), 2001-- to --.

Schittler, RR and Seo, JW and Gimzewski, JK and Durkan, C and Saifullah, MAM and Welland, ME (2001) Single crystals of single-walled carbon nanotubes formed by self-assembly. Science, 292. pp. 1136-1138. ISSN 0036-8075

Schmidt, I and Fleck, NA (2001) Crack growth resistance of metal foams. In: 10th International Conference on Fracture, 2001-12-3 to 2001-12-7, Honolulu, Hawaii pp. 336-340..

Schmidt, I and Fleck, NA (2001) Ductile fracture of two-dimensional cellular structures. International Journal of Fracture, 111. pp. 327-342. ISSN 0376-9429

Schofield, M and Gregory, M (2001) Patterns of communication around new product development in an emerging business. In: 8th International Product Development Management Conference, 2001-6-11 to 2001-6-12, University of Twente, Netherlands.

Scholtes, S (2001) Convergence properties of a regularization scheme for mathematical programs with complementarity constraints. SIAM Journal on Optimization, 11. pp. 918-936. ISSN 1052-6234

Scholtes, S and Stöhr, M (2001) How stringent is the linear independence assumption for mathematical programs with complementarity constraints? Mathematics of Operations Research, 26. pp. 851-863. ISSN 0364-765X

Schott, C and Perkins, SP and Coles, HJ (2001) Physical properties of some novel nematic bimesogens for the flexoelectric effect. MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 366. pp. 715-724. ISSN 1058-725X

Schott, C and Perkins, SP and Coles, HJ (2001) Physical properties of some novel nematic bimesogens for the flexoelectric effect. Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals, 366. pp. 715-724. ISSN 1058-725X

Schouten, NPV and Damasius, NG and McMahon, RA (2001) New drive concepts using single chip inverters. In: UNSPECIFIED pp. 1715-1720..

See, HJ and Parks, GT and Vassiliadis, VS and Wilson, DI (2001) A simulated annealing based scheduling algorithm for selecting reverse osmosis membrane cleaning schedules. In: UNSPECIFIED pp. 149-164..

Seffen, KA (2001) Analysis of transducers for digital loudspeakers and phased array antennae. Technical Report. UMIST.

Seffen, KA (2001) On the behavior of folded tape-springs. Transactions of the ASME: Journal of Applied Mechanics, 68. pp. 369-375. ISSN 0021-8936

Seffen, KA (2001) Through-thickness effects in curved piezoelectric beams. Technical Report. UMIST.

Seffen, KA and Parks, GT and Clarkson, PJ (2001) Observations on the controllability of motion of two-wheelers. P I MECH ENG I-J SYS, 215. pp. 143-156. ISSN 0959-6518

Sellars, MP and Porter, J and Greaves, SD and Wassell, IJ and Hopper, A and Fitzgerald, WJ (2001) Performance of fast start-up equaliser for broadband indoor radio. IEE P-COMMUN, 148. pp. 49-56. ISSN 1350-2425

Seo, Y and Heyden, A and Cipolla, R (2001) A linear iterative method for auto-calibration using the DAC equation. In: The 20th IEEE International Conference on Computer Vision and Pattern Recognition (CVPR'01), 2001-12- to --, Kauai, HI, US pp. 880-888..

Sepulchre, R and Arcak, M and Teel, AR (2001) Trading the stability of finite zeros for global stabilization of nonlinear cascade systems. In: UNSPECIFIED pp. 3025-3030..

Sharff, A and Fanutti, C and Shi, J and Calladine, CR and Luisi, B (2001) The role of the TolC family in protein transport and multidrug efflux: from stereochemical certainty to mechanistic hypothesis. European Journal of Biochemistry, 268. pp. 5011-5026. ISSN 0014-2956

Sharma, JS and Bolton, MD (2001) Centrifugal and numerical modelling of reinforced embankments on soft clay installed with wick drains. Geotextiles and Geomembranes, 19. pp. 23-44. ISSN 0266-1144

Sharma, JS and Bolton, MD and Boyle, RE (2001) A new technique for simulation of tunnel excavation in a centrifuge. GEOTECH TEST J, 24. pp. 343-349. ISSN 0149-6115

Sharma, SB and Sutcliffe, MPF (2001) Draping of woven composites over irregular surfaces. In: 13th International Conference on Composite Materials (ICCM-13), 2001-6-25 to 2001-6-29, Beijing, China.

Sharma, SB and Sutcliffe, MPF and Cliffort, MJ and Long, AC (2001) Experimental investigation of tow deformation during draping of woven fabrics. In: The 4th International Conference on Material Forming, ESAFORM, 2001-4- to --, Liege, Belgium pp. 107-110..

Shea, K (2001) An approach to multi-objective optimization for parametric synthesis. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 203-210..

Sheng, K and Udrea, F and Amaratunga, GAJ (2001) Double gate 3D AC switch - a new power semiconductor device. In: The 31st European Solid-State Device Research Conference (ESSDERC'01), 2001-9-11 to 2001-9-13, Nuremburg, Germany pp. 407-410..

Sheng, K and Udrea, F and Amaratunga, GAJ and Palmer, PR (2001) Behaviour of the CoolMOS device and its body diode. In: The 31st European Solid State Device Research Conference, 2001-9- to -- pp. 251-254..

Sheng, K and Udrea, F and Amaratunga, GAJ and Palmer, PR (2001) Behaviour of the CoolMOS device and its body diode. In: The 31st European Solid-State Device Research Conference (ESSDERC'01), 2001-9-11 to 2001-9-13, Nuremburg, Germany pp. 251-254..

Shercliff, HR and Fleck, NA (2001) Ashby Festschrift - Preface. PROG MATER SCI, 46. pp. 187-189. ISSN 0079-6425

Shercliff, HR and Lovatt, AM (2001) Selection of manufacturing processes in design and the role of process modelling. Progress in Materials Science, 46. pp. 429-459. ISSN 0079-6425

Shi, Y (2001) Can a global manufacturing network really learn? -- from best practice imitation towards international capability synthesis. In: 12th Annual Production and Operations Management (POMS) Conference, 2001-3-30 to 2001-4-2, Orlando, FL.

Shi, Y (2001) Development of global manufacturing strategy. In: 6th International Conference on Manufacturing Technology, 2001-12-16 to 2001-12-18, Hong Kong.

Shi, Y (2001) Internationalisation and evolution of manufacturing systems: classic process models, new industrial issues and academic challenges. In: Strategic Manufacturing. Proceedings of the International Federation For Information Processing (IFIP) Work Group 5.7 International Working Conference on Strategic Manufacturing . Aalborg University, Denmark.

Shi, Y (2001) Internationalisation of manufacturing system: business evolutions, new system dimensions and platform. In: The 6th Research Symposium on International Manufacturing: Global Integration, -- to -- pp. 113-123..

Shi, Y and Briggs, H and Gregory, MJ (2001) Global manufacturing strategy: contents, process and challenges. In: What Really Matters In Operations Management. Proceedings of the 8th International Conference of the European Operations Management Association (EurOMA 2001) . Bath University, Bath, pp. 46-59.

Shi, Y and Gregory, MJ (2001) The evolution of international manufacturing: from independent factory towards global value network. In: 5th International Conference on Growing the International Firm: Success in Mergers, Acquisitions, Networks and Alliances, 2001-10-4 to 2001-10-6, Berlin, Germany.

Shi, Y and Gregory, MJ (2001) Global manufacturing virtual network (GMVN): a new manufacturing system for market agility and global mobility. In: Modelling Techniques Supporting Strategic Manufacturing. Proceedings of the 4th International Workshop of the International Federation of Information Processing (IFIP) . Aalborg University, Denmark.

Shi, Y and Gregory, MJ (2001) The evolution of international manufacturing: from independent factory towards global value network. In: 5th International Conference on Growing the International Firm: Success in Mergers, Acquisitions, Networks and Alliances, 2001-10-4 to 2001-10-6, Berlin, Germany.

Shi, YJ and Gregory, M (2001) Global manufacturing strategy: content, process and new challenges. In: 11th Industrial Engineering and Engineering Management Conference (IE&EM 2001), 2001-8-10 to 2001-8-12, Tianjin, China pp. 460-471..

Shieh, J and Huber, JE and Fleck, NA and Ashby, MF (2001) The selection of sensors. Progress in Materials Science, 46. pp. 461-504. ISSN 0079-6425

Shields, AJ and O'Sullivan, MP and Farrer, I and Ritchie, DA and Leadbeater, ML and Patel, NK and Hogg, RA and Norman, CE and Curson, NJ and Pepper, M (2001) Single photon detection with a quantum dot transistor. In: UNSPECIFIED pp. 2058-2064..

Shields, AJ and O'Sullivan, MP and Farrer, I and Ritchie, DA and Leadbeater, ML and Pepper, M (2001) Single photon detection using self organised quantum dots. In: UNSPECIFIED pp. 1797-1800..

Shirazi, R and Frizelle, GDM (2001) Minimizing the number of tool switches on a flexible machine: An experimental study. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215. pp. 253-260. ISSN 0954-4054

Shirazi, R and Frizelle, GDM (2001) Minimizing the number of tool switches on a flexible machine: an empirical study. International Journal of Production Research, 39. pp. 3547-3560. ISSN 0020-7543

Shu, JY and Van der Giessen, E and Fleck, NA and Needleman, A (2001) Boundary layers in constrained plastic flow: comparison of nonlocal and discrete dislocation plasticity. Journal of the Mechanics and Physics of Solids, 49. pp. 1361-1395. ISSN 0022-5096

Simmonds, PG and Cooke, KM and Nickless, G and Britter, RE and Di Sabatino, S (2001) Tracer technology and the study of atmosphere dispersion in the urban environment. In: Proceedings of the NERC/URGENT Annual Conference, 2001-4-4 to 2001-4-6, Birmingham, UK.

Simone, A and Remmers, JJC and Wells, GN (2001) An interface element based on the partition of unity. Technical Report. Delft University of Technology, Delft, the Netherlands.

Simone, A and Wells, GN and Sluys, LJ (2001) A novel technique for modelling interfaces in reinforced brittle materials. In: 4th International Conference on Fracture Mechanics of Concrete Structures (FRAMCOS4), 2001-5-28 to 2001-6-1, Cachan, France pp. 841-846..

Singh, SS and Krishnamurthy, V (2001) Partially observed stochastic shortest path problem - application to sequential paging in cellular networks. In: 40th IEEE Conference on Decesion and Control, 2001-12-4 to 2001-12-7, Orlando, FL, USA pp. 1053-1058..

Singh, SS and Krishnamurthy, V and Poor, HV (2001) Admission control for DS-CDMA systems with fading. In: Global telecommunications conference. IEEE, San Antonio, TX, pp. 705-710.

Slater, SA and Young, JB (2001) The calculation of inertial particle transport in dilute gas-particle flows. INT J MULTIPHASE FLOW, 27. pp. 61-87. ISSN 0301-9322

Sluys, LJ and Estrin, Y and Wells, GN (2001) Multi-level analysis of localisation problems. In: 2nd European Conference on Computational Mechanics, 2001-6-26 to 2001-6-29, Cracow, Poland.

Smith, AN and Babinsky, H and Fulker, J and Ashill, P (2001) Control of normal shock wave/turbulent boundary-layer interactions using streamwise slots. In: 39th Aerospace Sciences Meeting and Exhibit, 2001-1-8 to 2001-1-11, Reno, NV, USA.

Smith, AN and Babinsky, H and Fulker, JL and Ashill, PA (2001) Normal Shock wave/turbulent boundary layer interactions in the presence of streamwise slots and grooves. In: Proceedings of the Royal Aeronautical Society Aerodynamics Conference, 2001-4- to --, London, UK.

Smith, AN and Babinsky, H and Fulker, JL and Ashill, PR (2001) Control of normal shock wave / turbulent boundary-layer interaction using streamwise slots. 39th Aerospace Sciences Meeting and Exhibit.

Smith, J and Clarkson, PJ (2001) Improving reliability during conceptual design. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 83-90..

Smith, MC (2001) Synthesis of passive mechanical networks: the inerter concept and its application. Technical Report. University of Cambridge, Cambridge, UK.

Smith, MC and Wang, FC (2001) Controller parametrisation for disturbance response decoupling: application to vehicle active suspension control. In: The 40th IEEE Conference on Decision and Control, -- to --.

Smith, MC and Wang, FC (2001) Controller parametrisation for disturbance response decoupling: application to vehicle active suspension control. In: The 40th IEEE Conference on Decision and Control, 2001-12-4 to 2001-12-7, Orlando, FL, USA pp. 105-110..

Smith, N and Gales, MJF (2001) Speech recognition using SVMs. In: The 15th Conference on Neural Information Processing Systems, 2001-12- to --, British Columbia, Canada pp. 1197-1204..

Smith, ND and Gales, MJF and Niranjan, M (2001) Data-dependent Kernels in SVM classification of speech patterns. Technical Report. Cambridge Univeristy, Cambridge, UK.

Smith, PJ and Cardwell, DA and Babu, NH and Kambara, M and Shi, Y (2001) Self-seeded melt growth of Au-doped Nd-Ba-Cu-O. Superconductor Science and Technology, 14. pp. 624-630. ISSN 0953-2048

Smith, PJ and Cardwell, DA and Babu, NH and Kambara, M and Shi, YH (2001) Preparation of doped precursor powders for the fabrication of large grain high temperature superconductors. IEEE Transactions on Applied Superconductivity, 11. pp. 2850-2853. ISSN 1051-8223

Smith, PJ and Cardwell, DA and Babu, NH and Kambara, M and Shi, YH (2001) Self-seeded melt growth of Au-doped Nd-Ba-Cu-O. SUPERCOND SCI TECH, 14. pp. 624-630. ISSN 0953-2048

Smith, PJ and Cardwell, DA and Hari-Babu, N and Kambara, M and Shi, YH (2001) Preparation of doped precursor powders for the fabrication of large grain high temperature superconductors. In: UNSPECIFIED pp. 2850-2853..

Sparck Jones, K and Jourlin, P and Johnson, SE and Woodland, PC (2001) The Cambridge multimedia document retrieval (MDR) project: summary of experiments. Technical Report. University of Cambridge, Cambridge, UK.

Speakman, SP and Rozenburg, GG and Clay, KJ and Milne, WI and Ilie, A and Garner, IA and Bressler, E and Steinke, JHG (2001) High performance organic semiconducting thin films: Ink jet printed polythiophene [rr-P3HT]. Organic Electronics, 2. pp. 65-73. ISSN 1566-1199

Spence, RJS and Macmillan, S and Kirby, P (2001) Interdisciplinary design in practice. Inst of Civil Engineers Pub, -.

Sridhar, I and Fleck, NA and Akisanya, AR (2001) Cold compaction of an array of cylindrical fibres. International Journal of Mechanical Sciences, 43. pp. 715-742. ISSN 0020-7403

Stacey, MK and Eckert, CM (2001) Managing uncertainty in design communications. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23, Glasgow, UK pp. 441-448..

Stallinga, P and Gomes, HL and Rost, H and Holmes, AB and Harrison, MG and Friend, RH (2001) Minority-carrier effects in poly-phenylenevinylene as studied by electrical characterization. J APPL PHYS, 89. pp. 1713-1724. ISSN 0021-8979

Stanistreet, TF and Allwood, JM (2001) Convergence properties of an Eulerian elastoviscoplastic problem solved directly from a system of first order equations. In: Simulation of Materials Processing: Theory, Methods and Applications. Routledge, Oxford, UK, pp. 67-72.

Stark, BH and Palmer, PR (2001) Design of single-gated multiple-mode power semiconductor devices. IEE Proceedings on Circuits, Devices and Systems, 148. pp. 64-70. ISSN 1350-2409

Steele, JH and Vinnicombe, G (2001) Closed-loop time-domain model validation in the nu-gap metric. In: 40th IEEE Conference on Decision and Control, 2001, 2001-12-4 to 2001-12-7, Orlando, FL, USA pp. 4332-4337..

Stenger, B and Mendonca, PRS and Cipolla, R (2001) Model-based 3D tracking of an articulated hand. In: The 20th IEEE International Conference on Computer Vision and Pattern Recognition (CVPR'01), 2001-12- to --, Kauai, HI, US pp. 310-315..

Stenger, B and Mendonca, PRS and Cipolla, R (2001) Model-based hand tracking using an unscented Kalman filter. In: The 12th British Machine Vision Conference (BMVC'01), 2001-9- to --, Manchester, UK pp. 63-72..

Stow, SR and Dowling, AP (2001) Thermoacoustic oscillations in an annular combustor. In: ASME Turbo Expo 2001, 2001-6-4 to 2001-6-7, New Orleans, LA, US.

Stratford, TJ and Burgoyne, CJ (2001) Shear analysis of concrete with brittle reinforcement. In: The 5th International Conference on Fibre-Reinforced Plastics for Reinforced Concrete Structures, FRPRCS-5, Cambridge, 16-18 July 2001 (vol.2), 2001-7-16 to 2001-7-18, Cambridge, UK pp. 939-948..

Stuetz, RM and Fenner, RA (2001) Odour measurements using sensor arrays. In: Odour in Wastewater Treatment: measurement, modelling and control. IWA Publishing, London, UK, -.

Stuttle, MN and Gales, MJF (2001) A mixture of gaussians front end for speech recognition. In: The 7th European Conference on Speech Communication and Technology, 2001-9- to --, Aalborg, Denmark pp. 675-678..

Suppapitnarm, A (2001) Multiobjective optimisation of bicycle design. PhD thesis, UNSPECIFIED.

Suppapitnarm, A (2001) A multiobjective simulated annealing code for conceptual bicycle-system design generation with a structural shape grammar. Technical Report. Cambridge University Engineering Department, Cambridge, UK.

Suppapitnarm, A and Parks, GT and Shea, K and Clarkson, PJ (2001) Conceptual design of the bicycle-rider system by multiobjective optimisation. In: The 3rd ASMO-UK/ISSMO Conference on Engineering Design Optimization Product and Process Improvement, 2001-7-9 to 2001-7-10 pp. 211-218..

Sutcliffe, MPF and Montmitonnet, P (2001) Numerical modelling of lubricated foil rolling | Un modèle de lubrification en laminage à froid. Revue de Metallurgie. Cahiers D'Informations Techniques, 98. pp. 435-442. ISSN 0035-1563

Sutcliffe, MPF and Yuwono, AH (2001) Experimental study of microbuckle initiation in a model composite system. Scripta Materialia, 45. pp. 831-837. ISSN 1359-6462

Swaminathan, N and Bilger, RW (2001) Analyses of conditional moment closure for turbulent premixed flames. Combustion Theory and Modelling, 5. pp. 241-260. ISSN 1364-7830

Swaminathan, N and Bilger, RW (2001) Scalar dissipation, diffusion, and dilatation in turbulent H2-air premixed flames with complex chemistry. Combustion Theory and Modelling, 5. pp. 429-446. ISSN 1364-7830

Swaminathan, N and Bilger, RW and Cuenot, B (2001) Relationship between turbulent scalar flux and conditional dilatation in premixed flames with complex chemistry. Combustion and Flame, 126. pp. 1764-1779. ISSN 0010-2180

T

Take, WA and Bolton, MD (2001) The use of centrifuge modelling to investigate progressive failure of overconsolidated clay embankments. In: International Workshop on Constitutive and Centrifuge Modelling: Two Extremes, 2001-7-8 to 2001-7-13, Monte Verita, Switzerland pp. 191-198..

Tam, SWB and Matsueda, Y and Kimura, M and Shimoda, T and Migliorato, P (2001) Poly-Si driving circuits for organic EL displays. Proceedings of SPIE, Flat P. pp. 125-133. ISSN 0361-0748

Tan, KH and Platts, KW (2001) Applying the connectance concept in manufacturing improvement plan selection: towards a handbook of manufacturing action plans. In: IFIP WG 5.7 International Working Conference on Strategic Manufacturing, 2001-8-26 to 2001-8-29, Aalborg, Denmark..

Tan, KH and Platts, KW (2001) A process for manufacturing objectives deployment. In: Twelfth Annual Conference of the Production and Operations Management Society (POM-2001), 2001-3-30 to 2001-4-2, Orlando, FL, USA.

Tan, KL and Warr, ST and Manolis, IG and Wilkinson, TD and Redmond, MM and Crossland, WA and Mears, RT and Robertson, B (2001) Dynamic holography for optical interconnections. II. Routing holograms with predictable location and intensity of each diffraction order. Journal of the Optical Society of America A: Optics and Image Science, 18. pp. 205-215. ISSN 1084-7529

Tan, LS and Tan, DGH and McMahon, RA and Carter, DRH (2001) Fifth-order state-space modeling of class E amplifiers with finite-series inductance and an anti-parallel diode at the switch. IEEE T CIRCUITS-I, 48. pp. 1141-1146. ISSN 1057-7122

Tanner, BK and LiBassi, A and Ferrari, AC and Robertson, J (2001) X-ray reflectivity of ultra-thin diamond-like carbon films. Materials Research Society Symposium Proceedings, 675. 11.4-11.5. ISSN 1526-2421

Taymur, B and Madabhushi, SPG (2001) CPT assessment of boundary effects in dynamic centrifuge modelling. In: 4th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, 2001-3- to --, San Diego, CA, USA.

Tee, CATH and Crossland, WA and Collings, N and Wilkinson, TD and Robertson, P (2001) Design of a free space optical switch demonstrator for a VCSEL-based photonic packet switch. In: UNSPECIFIED pp. 118-120..

Tee, CATH and Crossland, WA and Collings, N and Wilkinson, TD and Robertson, P (2001) Design of a free space optical switch demonstrator for a VCSEL-based photonic packet switch. In: The OSA Conference on Optics in Computing (OC), 2001-1- to --, Lake Tahoe, NV, US pp. 70-72..

Tee, CATH and Crossland, WA and Collings, N and Wilkinson, TD and Robertson, PA (2001) Design of a free space optical switch demonstrator for a VCSEL-based photonic packet switch. In: The OSA Conference on Optics in Computing (OC), 2001-1- to --, Lake Tahoe, NV, US pp. 70-72..

Teo, KBK and Chhowalla, M and Amaratunga, GAJ and Milne, WI and Hasko, DG and Pirio, G and Legagneux, P and Wyczisk, F and Pribat, D (2001) Uniform patterned growth of carbon nanotubes without surface carbon. APPL PHYS LETT, 79. pp. 1534-1536. ISSN 0003-6951

Teo, KBK and Chhowalla, M and Amaratunga, GAJ and Milne, WI and Pirio, G and Legagneux, P and Wyczisk, F and Pribat, D (2001) Preferential growth of carbon nanotubes/nanofibers using lithographically patterned catalysts. Materials Research Society. Symposium Proceedings, 675. W9.1-. ISSN 1526-2421

Teo, KBK and Rodil, SE and Tsai, JH and Ferrari, AC and Robertson, J and Milne, WI (2001) Effect of graphitic inclusions on the optical gap of tetrahedral amorphous carbon films. Journal of Applied Physics, 89. pp. 3706-3710. ISSN 0021-8979

Teymur, B and Madabhushi, SPG (2001) Application of harmonic wavelet analysis to soil motion data. In: The 18th Biennial Conference on Mechanical Vibration and Noise (2001 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference), 2001-9- to -- pp. 23-30..

Teymur, B and Madabhushi, SPG (2001) Application of wavelet analysis to the strong motion data recorded during the Kocaeli and 921 Ji-Ji earthquakes. In: XVth International Conference on Soil Mechanics and Geotechnical Engineering: Lessons Learned From Recent Strong Earthquakes (Earthquake Geotechnical Engineering Satellite Conference), 2001-8-24 to 2001-8-25, Istanbul, Turkey.

Teymur, B and Madabhushi, SPG (2001) Shear stress-strain analysis of sand under transient loading using harmonic wavelet analysis. In: 12th European Conference on Earthquake Engineering (12th ECEE), 2001-9-9 to 2001-9-13, London, UK.

Teymur, B and Madabhushi, SPG (2001) Understanding the ground motion of the Kocaeli earthquake, Turkey 1999. In: The 15th International Conference on Soil Mechanics and Geotechnical Engineering (XVth ICSMGE), 2001-8- to -- pp. 519-522..

Teymur, B and Madabhushi, SPG (2001) Usage of miniature CPT in dynamic centrifuge modelling to evaluate liquefaction resistance. In: The 10th International Conference on Soil Dynamics and Earthquake Engineering; SDEE' 2001, 2001-10- to -- p.211-..

Teymur, B and Madabhushi, SPG and Newland, DE (2001) Application of wavelet theory in the analysis of earthquake motions recorded during the Kocaeli earthquake. In: 4th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, 2001-3- to --, San Diego, CA, USA.

Thompson, RM and Stevenson, RM and Shields, AJ and Farrer, I and Lobo, CJ and Ritchie, DA and Leadbeater, ML and Pepper, M (2001) Single-photon emission from exciton complexes in individual quantum dots. PHYS REV B, 6420. -. ISSN 0163-1829

Todorov, E and Ghahramani, Z (2001) A theory of optimal motor-sensory primitives. In: 11th Annual Meeting of Neural Control of Movement, 2001-3-24 to 2001-4-1, Seville, Spain.

Trajkovic, T and Udrea, F and Amaratunga, GAJ (2001) Single to double gate TIGBTs - possible road-map to ultra-high voltage bipolar-MOS devices. In: The Bipolar/BiCMOS Circuits and Technology Meeting, 2001-9- to --, Minneapolis, MN, USA pp. 184-187..

Trajkovic, T and Udrea, F and Waind, PR and Thomson, J and Amaratunga, GAJ and Milne, WI (2001) Optimum design of 1.4 kV non-punch-through trench IGBTs: the next generation of high-power switching devices. I E T Circuits, Devices and Systems, 148. pp. 71-74. ISSN 1350-2409

Trajkovic, T and Udrea, F and Waind, PR and Thomson, J and Amaratunga, GAJ and Milne, WI (2001) Optimum design of 1.4 kV non-punch-through trench IGBTs: the next generation of high-power switching devices. IET Proceedings on Circuits Devices and Systems, 148. pp. 71-74. ISSN 1350-2409

Treece, GM and Prager, RW and Gee, AH (2001) Volume-based three-dimensional metamorphosis using sphere-guided region correspondence. Visual Computer, 17. pp. 397-414. ISSN 0178-2789

Treece, GM and Prager, RW and Gee, AH and Berman, L (2001) Correction of probe pressure artifacts in freehand 3D ultrasound. In: Medical Image Computing and Computer Assisted Intervention - MICCAI 2001. Lecture notes in computer science . Springer, Berlin, Germany, pp. 283-290.

Treece, GM and Prager, RW and Gee, AH and Berman, LH (2001) Correction of probe pressure artifacts in freehand 3D ultrasound - further results and convex probes. Technical Report. Cambridge University, Cambridge, UK.

Treece, GM and Prager, RW and Gee, AH and Berman, LH (2001) Correction of probe pressure artifacts in freehand 3D ultrasound - initial results. Technical Report. Cambridge University, Cambridge, UK.

Treece, GM and Prager, RW and Gee, AH and Berman, LH (2001) 3D ultrasound measurement of large organ volume. Medical Image Analysis, 5. pp. 41-54. ISSN 1361-8415

Trezona, RI and Hutchings, IM (2001) Resistance of paint coatings to multiple solid particle impact: effect of coating thickness and substrate material. Progress in Organic Coatings, 41. pp. 85-92. ISSN 0300-9440

Troughton, PT and Godsill, SJ (2001) MCMC methods for restoration of nonlinearly distorted autoregressive signals. SIGNAL PROCESS, 81. pp. 83-97. ISSN 0165-1684

Tucker, PG (2001) Computation of particle and scalar transport for complex geometry turbulent flows. Transactions of ASME, Journal of Fluids Engineering, 123. pp. 372-381. ISSN 0098-2202

Tucker, PG (2001) Computation of unsteady internal flows: fundamental methods with case studies. Kluwer Academic Publishers, Boston, USA, -.

Tucker, PG (2001) Models aid the analysis of electronics cooling. Microwaves and RF. pp. 95-96.

Tucker, PG (2001) Novel multigrid orientated solution adaptive time-step approaches. In: 7th International Conference on Numerical Methods for Fluid Dynamics, 2001-10- to --, Oxford, UK pp. 499-508..

Tucker, PG (2001) Temporal behaviour of flow in rotating cavities. In: 2nd International Symposium on Advances in Computational Heat Transfer, 2001-5-20 to 2001-5-25, Palm Cove, Queensland, Australia pp. 655-662..

Tucker, PG and Mosquera, A (2001) Introduction to grid and mesh generation for CFD. -.

Tucker, PG and Pan, Z (2001) URANS computations for a complex internal isothermal flow. Computer Methods in Applied Mechanics and Engineering, 190. pp. 2893-2907. ISSN 0045-7825

Tuerk, A and Johnson, SE and Jourlin, P and Sparck Jones, K and Woodland, PC (2001) The Cambridge University multimedia document retrieval demo system. International Journal of Speech Technology, 4. pp. 241-250. ISSN 1381-2416

Tuerk, A and Young, SJ (2001) Indicator variable dependent output probability modelling via continuous posterior functions. In: The IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP), 2001-5- to -- pp. 473-476..

Tuerk, A and Young, SJ (2001) A system for computer assisted grammar construction. Technical Report. University of Cambridge: Department of Engineering, Cambridge, UK.

Tullis, SW and Cant, RS (2001) Counter-gradient scalar transport in large eddy simulation of turbulent premixed flames. In: IUTAM Symposium on Turbulent Mixing and Combustion, 2001-6-3 to 2001-6-6, Kingston, Ontario, Canada pp. 259-267..

Tunna, L and Kearns, A and O'Neill, W and Sutcliffe, CJ (2001) Micromachining of copper using Nd : YAG laser radiation at 1064, 532, and 355 nm wavelengths. Optics and Laser Technology, 33. pp. 135-143. ISSN 0030-3992

Tunna, L and Khan, A and O'Neill, W (2001) Micromachining and cutting of 316L SS using DPSS lasers under controlled atmospheres. In: International Congress on Applications of Lasers and Electro-Optics (ICALEO 2001), 2001-10-13 to 2001-10-19, Florida, USA.

Tunna, L and O'Neill, W and Sutcliffe, C and Khan, AH (2001) Investigation of multi-wavelength DPSS laser micromachining of stainless steel. The Industrial Laser User, Autumn. pp. 28-30. ISSN 1366-963X

Tyler, EJ and Webster, M and Williams, KA and Wonfor, A and Penty, RV and White, IH (2001) Proposal and demonstration of transmission of 10 Gb/s over 300 m of installed-base 62.5 /spl mu/m multimode fibre using advanced modulation formats. In: Optical Fiber Communication Conference and Exhibit 2001, OFC 2001, 2001-3- to --, Anaheim, CA, USA.

U

Udrea, F and Gardner, JW and Setiadi, D and Covington, JA and Dogaru, T and Lu, CC and Milne, WI (2001) Design and simulations of SOI CMOS micro-hotplate gas sensors. Sensors and Actuators, B: Chemical, 78. pp. 180-190. ISSN 0925-4005

Udrea, F and Gardner, JW and Setiadi, D and Covington, JA and Dogaru, T and Lu, CC and Milne, WI (2001) Design and simulations of SOI CMOS micro-hotplate gas sensors. Sensors and Actuators B: Chemical, 78. pp. 180-190. ISSN 0925-4005

Udrea, F and Mihalia, A and Azar, R (2001) Silicon/oxide/silicon carbide (SiOSiC)- a new approach for high voltage, high frequencies integrated circuits. In: The 9th International Conference on Silicon Carbide and Related Materials ( ICSCRM2001), 2001-10- to --, Tsukuba, Japan pp. 1255-1258..

Udrea, F and Trajkovic, T and Thomson, J and Coulbeck, L and Waind, PR and Amaratunga, GAJ and Taylor, P (2001) Ultra-high voltage device termination using the 3D RESURF (super-junction) concept - experimental demonstration at 6.5 kV. In: The 11th IEEE International Symposium on Power Semiconductor Devices and ICs (ISPSD), 2001-6- to --, Osaka, Japan pp. 129-132..

Uebel, LF and Woodland, PC (2001) Discriminative linear transforms for speaker adaptation. In: ISCA Tutorial and Research Workshop (ITRW) on Adaptation Methods for Speech Recognition, 2001-8-29 to 2001-8-30, Sophia Antipolis, France pp. 61-64..

Uebel, LF and Woodland, PC (2001) Improvements in linear transform based speaker adaptation. In: IEEE international Conference on Acoustics Speech and Signal Processing, 2001-5-7 to 2001-5-11, Salt Lake City, Utah pp. 49-52..

Uebel, LF and Woodland, PC (2001) Speaker adaptation using lattice-based MLLR. In: ISCA Tutorial and Research Workshop (ITRW) on Adaptation Methods for Speech Recognition, 2001-8-29 to 2001-8-30, Sophia Antipolis, France pp. 57-60..

V

Van Beers, RJ and Wolpert, DM and Haggard, P (2001) Sensorimotor integration compensates for visual localization errors. during smooth pursuit eye movements. Journal of Neurophysiology, 85. pp. 1914-1922. ISSN 0022-3077

Van Zijl, GPA and Wells, GN (2001) Time scale in concrete fracture: a model based on partitions of unity. In: 4th International Conference on Fracture Mechanics of Concrete Structures (FRAMCOS4), 2001-5-28 to 2001-6-1, Cachan, France pp. 301-306..

Van Zijl, GPA and Wells, GN (2001) A rate dependent model for analysing the interaction between creep and fracture. In: 6th International Conference on Creep, Shrinkage and Durability Mechanics of Concrete and other Quasi-Brittle Materials, 2001-8-20 to 2001-8-22, Cambridge, MA, USA pp. 229-238..

Vantine, KJ and Christen, U and Glover, K and Collings, N (2001) Analysis of an event-based diesel engine model for control purposes. In: The 3rd IFAC Workshop on Advances in Automotive Control, 2001-3- to --, Karlsruhe, Germany pp. 351-356..

Vasil'ev, PP (2001) Coherent effects in the generation of femtosecond pulses in semiconductor lasers. Physics-Uspekhi, 44. pp. 645-647. ISSN 1063-7869

Vasil'ev, PP and Kan, H and Ohta, H and Hiruma, T (2001) Properties of electrons and holes during femtosecond cooperative emission. Quantum Electronics, 31. pp. 870-876. ISSN 1063-7818

Vasil'ev, PP and Kan, H and Ohta, H and Hiruma, T (2001) Properties of electrons and holes during femtosecond cooperative emission. Quantum Electronics, 31. pp. 870-876. ISSN 1063-7818

Vasil’ev, P and Kan, H and Ohta, H and Hiruma, T (2001) Experimental evidence of condensation of electron-hole pairs at room temperature during femtosecond cooperative emission. Physical Review B, 64. ISSN 0163-1829

Vasil’ev, PP and Kan, H and Ohta, H and Hiruma, T (2001) Condensation of electron-hole pairs in bulk GaAs at room temperature under conditions of femtosecond cooperative radiation. Journal of Experimental and Theoretical Physics, 93. pp. 1288-1295. ISSN 1063-7761

Vinnicombe, G (2001) On closed-loop identification: error distributions in the v-gap metric. In: 40th IEEE Conference on Decision and Control, 2001, 2001-12-4 to 2001-12-7, Orlando, FL, USA pp. 3099-3103..

van der Giessen, E and Deshpande, VS and Cleveringa, HHM and Needleman, A (2001) Discrete dislocation plasticity and crack tip fields in single crystals. Journal of the Mechanics and Physics of Solids, 49. pp. 2133-2153. ISSN 0022-5096

W

Waidman, S and Knupfer, M and Fink, J and Kleinsorge, B and Robertson, J (2001) Electronic structure studies of undoped and nitrogen-doped tetrahedral amorphous carbon using high-resolution electron energy-loss spectroscopy. Journal of Applied Physics, 89. pp. 3783-3792. ISSN 0021-8979

Wallace, KM and Clegg, C and Keane, A (2001) Visions for engineering design: a multi-disciplinary perspective. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 107-114..

Wang, P and Hutchings, IM and Duncan, SJ and Jenkins, L (2001) Effect of crystallinity on scratch behavior and other properties of TPO. In: Automotive TPO Global Conference, 2001-10- to --, Dearborn, MI pp. 201-212..

Ward, JR and Clarkson, PJ (2001) Design verification support for the medical device industry. In: The 13th International Conference on Engineering Design (ICED'01), 2001-8-21 to 2001-8-23 pp. 211-218..

Ward, JR and Clarkson, PJ (2001) Device-related medical error - current practice and solutions. In: The Drug Delivery Companies Report 2001. PharmaVentures Ltd, pp. 58-63.

Weber, M and Cipolla, R (2001) A practical method for estimation of point light-sources. In: The 12th British Machine Vision Conference (BMVC'01), 2001-9- to --, Manchester, UK pp. 471-480..

Webster, M and Tyler, EJ and White, IH and Penty, RV (2001) A multi-level subcarrier modulation technique for 10Gb/s installed base multimode fibre links. In: Conference on Lasers and Electro-Optics, CLEO 01, 2001-5-6 to 2001-5-11, Baltimore, MD, USA pp. 416-417..

Webster, M and Tyler, EJ and Wonfor, A and Penty, RV and White, IH (2001) Novel cascaded optical coding schemes for bandwidth efficient systems applications. In: Optical Fiber Communication Conference and Exhibit, 2001, OFC 2001, 2001-3- to --, Anaheim, CA, USA.

Webster, M and Wonfor, A and Penty, RV and White, IH (2001) All-optical 2R regeneration and wavelength conversion at 10 Gb/s in an integrated semiconductor optical amplifier/distributed feedback laser. In: 27th European Conference on Optical Communication 2001, ECOC 01, 2001-9-30 to 2001-10-4, Amsterdam, The Netherlands pp. 578-579..

Weeks, BL and Barber, ZH and Raval, M and Welland, ME and Rayment, T (2001) Coated silica tips for use in high-pressure, high-temperature, scanning tunneling microscopy. ULTRAMICROSCOPY, 87. pp. 19-23. ISSN 0304-3991

Wells, GN (2001) Discontinuous modelling of strain localisation and failure. PhD thesis, UNSPECIFIED.

Wells, GN and De Borst, R and Sluys, LJ (2001) Analysis of cohesive cracks under quasi-static and dynamic loading. In: IUTAM Symposium on Analytical and Computational Fracture Mechanics of Non-homogeneous Materials, 2001-6-18 to 2001-6-22, Cardiff, UK pp. 293-302..

Wells, GN and De Borst, R and Sluys, LJ (2001) An enhanced finite element method for analysing failure in elasto-plastic solids. In: International Conference on the Trends in Computational Structural Mechanics, 2001-5-20 to 2001-5-23, Lake Constance, Austria pp. 397-408..

Wells, GN and De Borst, R and Sluys, LJ (2001) A new method for simulating discontinuities using finite elements. In: 4th International Conference on Analysis of Discontinuous Deformation, 2001-6-6 to 2001-6-8, Glasgow, Scotland pp. 451-460..

Wells, GN and Remmers, JJC and De Borst, R and Sluys, LJ (2001) A large strain discontinuous finite element approach to laminated composites. In: IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strains, 2001-8-20 to 2001-8-24, Stuttgart, Germany pp. 355-364..

Wells, GN and Sluys, LJ (2001) Analysis of slip planes in three-dimensional solids. Computer Methods in Applied Mechanics and Engineering, 190. pp. 3591-3606. ISSN 0045-7825

Wells, GN and Sluys, LJ (2001) Discontinuous analysis of softening solids under impact loading. International Journal for Numerical and Analytical Methods in Geomechanics, 25. pp. 691-709. ISSN 0363-9061

Wells, GN and Sluys, LJ (2001) On the conceptual equivalence of embedded strong discontinuity and smeared crack formulations. Heron, 46. pp. 181-189. ISSN 0046-7316

Wells, GN and Sluys, LJ (2001) Three-dimensional embedded discontinuity model for brittle fracture. International Journal of Solids and Structures, 38. pp. 897-913. ISSN 0020-7683

Wells, GN and Sluys, LJ (2001) A new method for modelling cohesive cracks using finite elements. International Journal for Numerical Methods in Engineering, 50. pp. 2667-2682. ISSN 0029-5981

Wells, GN and Sluys, LJ (2001) A new methodology for the discrete analysis of concrete fracture under impact loading. In: 4th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FRAMCOS4), 2001-5-28 to 2001-6-1, Cachan, France pp. 847-856..

Wells, GN and Sluys, LJ (2001) A p-adaptive scheme for overcoming volumetric locking during isochoric plastic deformation. In: 2nd European Conference on Computational Mechanics, ECCM'01, 2001-6-26 to 2001-6-29, Cracow, Poland.

Wells, GN and Sluys, LJ and De Borst, R (2001) Computational modelling of cracks in viscoplastic media. In: 10th International Conference on Fracture (ICF10), 2001-12-2 to 2001-12-6, Honolulu, Hawaii, USA.

White, DJ and Barefoot, AJ and Bolton, MD (2001) Centrifuge modelling of upheaval buckling in sand. International Journal of Physical Modelling in Geotechnics, 1. pp. 19-28. ISSN 1346-213X

White, DJ and Bolton, MD (2001) Observing friction fatigue on a jacked pile. In: International Workshop on Constitutive and Centrifuge Modelling: Two Extremes, 2001-7-8 to 2001-7-13, Monte Verita, Switzerland pp. 347-354..

White, DJ and Springman, SM and Weber, T (2001) Discussion on problems governed by DEFORMATION. In: Workshop on Constitutive and Centrifuge Modelling: Two Extremes, 2001-7-8 to 2001-7-13, Monte Verita, Switzerland pp. 291-312..

White, DJ and Take, WA and Bolton, MD (2001) Measuring soil deformation in geotechnical models using digital images and PIV analysis. In: The 10th International Conference on Computer Methods and Advances in Geomechanics, 2001-1- to --, Tuscon, AZ, USA pp. 997-1002..

White, DJ and Take, WA and Bolton, MD and Munachen, SE (2001) A deformation measuring system for geotechnical testing based on digital imaging, close-range photogrammetry, and PIV image analysis. In: The 15th International Conference on Soil Mechanics and Geotechnical Engineering (XVth ICSMGE), 2001-8-27 to 2001-8-31, Istanbul, Turkey pp. 539-542..

White, IH and Penty, RV and Webster, M (2001) Components for packet switched optical networks. In: Global Communications Conference (Globecom 2001), 2001-11- to --, San Antonio, TX, USA.

Whittaker, EWD and Woodland, PC (2001) Efficient class-based language modelling for very large vocabularies. In: IEEE international Conference on Acoustics Speech and Signal Processing, 2001-5-7 to 2001-5-11, Salt Lake City, Utah pp. 545-548..

Wierzbicki, T and Doyoyo, M and Markaki, AE (2001) Redefining the concept of stress-strain curve for foams. In: The 2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001), 2001-6- to -- pp. 449-454..

Wiklund, U and Hutchings, IM (2001) Investigation of surface treatments for galling protection of titanium alloys. Wear, 251. pp. 1034-1041. ISSN 0043-1648

Wilkinson, TD (2001) Advanced microdisplay development. In: CUPID Conference on Microdisplays, 2001-9- to --, Edinburgh, Scotland.

Wilkinson, TD (2001) Electrically addressed SLMs for telecommunications. In: Basics and Perspective Applications of Liquid Crystals in Optical Communications Technologies (BALC2001) and Optics of Liquid Crystals (OLC2001), 2001-9-30 to 2001-10-1, Naples, Italy.

Wilkinson, TD (2001) Liquid crystal materials and applications for the next generation of microdisplays. In: 2nd Anglo-Japanese Seminar on Liquid Crystals, 2001-9- to --, York, UK.

Wilkinson, TD and Crossland, WA (2001) FLC over silicon based optical systems. In: 4th Euro-American Workshop on Optoelectronic Information Processing, 2001-5- to --, Valencia, Spain.

Wilkinson, TD and Crossland, WA (2001) Optical routing with liquid crystal arrays. In: Optoelectronic and Wireless Data Management, Processing, Storage, and Retrieval. Proceedings of SPIE, 4534 . SPIE: The International Society for Optical Engineering, pp. 64-69.

Wilkinson, TD and New, N (2001) Compact-optical-correlator-based helmet tracking system. In: Optical Pattern Recognition XII. Proceedings of SPIE, 4387 . SPIE: The International Society for Optical Engineering, pp. 52-59.

Wilkinson, TD and New, N (2001) Ferroelectric liquid crystal over silicon optical comparator. In: IOP Optical Group Meeting on Applied Photonic Processing, 2001-6- to --, London, UK.

Wilkinson, TD and New, N (2001) Head tracker based on a compact optical correlator. In: Helmet- and Head-Mounted Displays VI. Proceedings of SPIE, 4361 . SPIE: The International Society for Optical Engineering, pp. 108-114.

Wilkinson, TD and New, N and Crossland, WA (2001) Optical comparator based on an FLC over Silicon SLM. Molecular Crystals and Liquid Crystals, 360. pp. 17-27. ISSN 1058-725X

Wilkinson, TD and Redmond, MM and Manolis, IG and Robertson, B and Crossland, WA (2001) OTuC3 High tilt angle FLC over silicon SLM for optical crossconnects. In: Optics in Computing, 2001-1- to --, Lake Tahoe, NV, US pp. 38-40..

Williams, JA (2001) Advances in the modelling of boundary lubrication. In: The 28th International Symposium on Symposium on tribology; Boundary and Mixed Lubrication Science and Application, 2001-9- to -- pp. 37-48..

Williams, JA (2001) Friction and wear of rotating pivots in MEMS and other small scale devices. Wear, 251. pp. 965-972. ISSN 0043-1648

Williams, JA and Hyncica, AM (2001) Mechanisms of abrasive wear in lubricated contacts. In: Hydraulic Failure Analysis: Fluids, Components and System Effects. American Soicety for Testing and Materials, pp. 13-31.

Williams, KA and Penty, RV and White, IH and Silver, M (2001) Requirements for uncooled direct lasers modulation at 10Gb/s. In: UNSPECIFIED pp. 118-127..

Williams, T and Ellis, B and Maull, R and Gregory, MJ (2001) Offset strategies in the global aerospace sector. In: The 6th Research Symposium on International Manufacturing: global integration, -- to -- pp. 153-166..

Williams, T and Maull, R and Ellis, B and Gregory, MJ (2001) Global aerospace competences: strategy and supply chain tiers. In: What Really Matters in Operations Management. Proceedings of EurOMA 8th International Annual Conference . European Operations Management Association (EurOMA), Bath, UK, pp. 35-45.

Wilson, S and Probert, DR (2001) Innovation processes within the healthcare industry: Determining critical success factors aligned to product strategies. In: UNSPECIFIED pp. 133-138..

Wilson, S and Probert, DR (2001) Innovation processes within the healthcare industry: determining critical success factors. In: The Portland International Conference on Management of Engineering and Technology (PICMET '01), 2, -- to -- pp. 133-138..

Winistoerfer, AU and Meier, U and Lees, JM (2001) CARBOSTRAP - Advanced composite tendons. In: ACUN-3 international composites conference; Technology convergence in composites applications, 2001-2- to -- pp. 24-30..

Witney, AG and Vetter, P and Wolpert, DM (2001) The influence of previous experience on predictive motor control. Neuroreport, 12. pp. 649-653. ISSN 0959-4965

Witze, PO and Hochgreb, S and Kayes, D and Michelsen, HA and Shaddix, CR (2001) Time-resolved laser-induced incandescence and laser elastic-scattering measurements in a propane diffusion flame. Applied Optics, 40. pp. 2443-2452. ISSN 0003-6935

Wolfe, PJ and Dorfler, M and Godsill, SJ (2001) Multi-Gabor dictionaries for audio time-frequency analysis. In: IEEE Workshop on Applications of Signal Processing to Audio and Acoustics (WASPAA01), 2001-10-21 to 2001-10-24, New Paltz, NY, US pp. 43-46..

Wolfe, PJ and Godsill, SJ (2001) On Bayesian estimation of spectral components for broadband noise reduction in audio signals. Technical Report. University of Cambridge: Department of Engineering, Cambridge, UK.

Wolfe, PJ and Godsill, SJ (2001) Perceptually motivated approaches to music restoration. Journal of New Music Research, 30. pp. 83-92. ISSN 0929-8215

Wolfe, PJ and Godsill, SJ (2001) Simple alternatives to the Ephraim and Malah suppression rule for speech enhancement. In: The 11th IEEE Signal Processing Workshop on Statistical Signal Processing, 2001-8- to --, Singapore pp. 496-499..

Wolpert, DM and Flanagan, JR (2001) Motor prediction. Current Biology, 11. pp. 729-732. ISSN 0960-9822

Wolpert, DM and Ghahramani, Z and Flanagan, JR (2001) Perspectives and problems in motor learning. Trends in Cognitive Sciences, 5. pp. 487-494. ISSN 1364-6613

Wolpert, DM and Ghahramani, Z and Flanagan, JR (2001) Perspectives and problems in motor learning. Trends in Cognitive Sciences, 5. pp. 487-494. ISSN 1364-6613

Wonfor, A and Yu, S and Penty, RV and White, IH (2001) Constant output power control in an optical crosspoint switch allowing enhanced noise performance operation. In: 27th European Conference on Optical Communication 2001, ECOC 01, 2001-9-30 to 2001-10-4, Amsterdam, The Netherlands pp. 136-137..

Wonfor, A and Yu, S and Penty, RV and White, IH (2001) Novel output power control of a semiconductor optical amplifier based switch. In: Conference on Lasers and Electro-Optics, CLEO 01, 2001-5-6 to 2001-5-11, Baltimore, MD, USA pp. 43-44..

Wong, KYK and Cipolla, R (2001) Structure and motion from silhouettes. In: The 8th IEEE International Conference on Computer Vision (ICCV'02), 2001-7- to --, Vancouver, Cananda pp. 217-222..

Wong, KYK and Mendonca, PRS and Cipolla, R (2001) Head model acquisition from silhouettes. In: The 4th International Workshop on Visual Form, 2001-5- to --, Capri, Italy pp. 787-796..

Woodland, PC (2001) Speaker adaptation for continuous density HMMs: a review. In: ISCA Tutorial and Research Workshop (ITRW) on Adaptation Methods for Speech Recognition, 2001-8-29 to 2001-8-30, Sophia Antipolis, France pp. 11-19..

X

Xu, L and Hynes, TP and Denton, JD (2001) Towards long length scale unsteady modelling in turbomachines. In: The 15th International Symposium on Airbreathing Engines (XV ISABE), 2001-9-3 to 2001-9-7, Bangalore, India pp. 57-58..

Xu, XZ and Xu, L and Cai, H (2001) Numerical investigation into cascade flow under partial admission. Chinese Journal of Engineering Thermophysics, 22. ISSN 0253-231X

Xu, XZ and Xu, L and Cai, H (2001) Some important problems about impeller design and the influence into internal flow and performance. Chinese Journal of Engineering Thermophysics, 22. ISSN 0253-231X

Y

Yang, S and Williams, KA and Penty, RV and White, IH and Wood, I and White, JK (2001) Enhanced performance of uncooled strongly-gain-coupled MQW DFB in 10Gb/s link applications. In: 27th European Conference on Optical Communication 2001, ECOC 01, 2001-9-30 to 2001-10-4, Amsterdam, The Netherlands pp. 124-125..

Yang, XS (2001) Asymptotic solutions of compaction in porous media. Applied Mathematics Letters, 14. pp. 765-768. ISSN 0893-9659

Yang, XS (2001) Chaos in small-world networks. Physical Review E: Statistical, Non-Linear and Soft Matter Physics, 63. 046206-. ISSN 1063-651X

Yang, XS (2001) Density-driven compactional flow in porous media. Journal of Computation and Applied Mathematics, 130. pp. 245-257. ISSN 0377-0427

Yassin, G and Jung, G and Dikovsky, V and Barboy, I and Kambara, M and Cardwell, DA and Withington, S (2001) Investigation of microwave propagation in high-temperature superconducting. IEEE Microwave and Wireless Components Letters, 11. pp. 413-415. ISSN 1531-1309

Yassin, G and Jung, G and Dikovsky, V and Barboy, I and Kambara, M and Cardwell, DA and Withington, S (2001) Investigation of microwave propagation in high-temperature superconducting. IEEE Microwave and Wireless Components Letters, 11. pp. 413-415. ISSN 1531-1309

Yimsiri, S and Soga, K (2001) Anisotropy of highly-overconsolidated clay in small- and intermediate-strain levels. In: The 14th Southeast Asian Geotechnical Conference; Geotechnical Engineering, 2001-12- to -- pp. 599-604..

Yimsiri, S and Soga, K (2001) Effects of soil fabric on undrained behaviour of sands. In: 4th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, 2001-3- to --, San Diego, CA, USA.

Yong, JCL and Rorison, JM and Penty, RV and White, IH (2001) Material gain comparison for InGaAsP, AlGaInAs and InGaAsN for 1.3 micron laser diodes. In: Conference on Lasers and Electro-Optics, CLEO 01, 2001-5-6 to 2001-5-11, Baltimore, MD, USA pp. 479-480..

Young, JB and Wilcock, RC (2001) Modelling the air-cooled gas turbine Part 1 - General thermodynamics. Proceedings of the ASME Turbo Expo, 2.

Young, JB and Wilcock, RC (2001) Modelling the air-cooled gas turbine Part 2 - Coolant flows and losses. Proceedings of the ASME Turbo Expo, 2.

Young, SJ (2001) Statistical modelling in continuous speech recognition (CSR). In: The 17th International Conference on Uncertainty in Artificial Intelligence (UAI 2001), 2001-8- to -- pp. 562-571..

Yuan, J and Teo, KBK and Milne, WI and Robertson, J and Legagneux, P and Pirio, G and Pribat, D and Bouzehouane, K and Bruenger, W and Trautmann, C (2001) Fabrication and analysis of conductive channels in diamond-like amorphous carbon films. In: Electron Microscopy and Analysis. Institute of Physics Conference Series, 168 . IoP, pp. 287-290.

Yuan, X and Udrea, F and Coulbeck, L and Waind, PR and Amaratunga, GAJ (2001) Modelling of IGBTs with local lifetime control. In: The 1st International Semiconductor Technology Conference, 2001-5- to --, Shanghai, China pp. 422-431..

Yuan, X and Udrea, F and Trajkovic, T and Thomson, J and Waind, P and Taylor, P and Amaratunga, GAJ (2001) Enhanced on-state performance trench IGBT with a self-aligned p base. In: 2001 IEEE Industry Applications Conference (36th IAS Annual Meeting), 2001-9-30 to 2001-10-4, Chicago, IL, USA pp. 1033-1037..

Z

Zhang, ZG and Chu, DP and McGregor, BM and Migliorato, P and Hasegawa, K and Shimoda, T (2001) Asymmetric polarization and imprint in (Pb,La)(Zr,Ti)O3 thin films. In: 10th International Meeting on Ferroelectricity (IMF-10), 2001-9- to --, Madrid, Spain.

Zhao, CY and Kim, T and Lu, TJ and Hodson, HP (2001) Thermal transport phenomena in novel lightweight metal foams. In: Heat Exchange Engineering, 2001-6- to --, Birmingham, UK.

Zhao, CY and Lu, TJ and Kim, T and Hodson, HP (2001) Numerical modelling on thermal management with porous metals. In: ADOPT, 2001-8- to --, MIT, Cambridge, MA, USA.

Zhao, D and Shi, Y and Gregory, MJ (2001) Manufacturing virtual network systems. In: The 6th Research Symposium on International Manufacturing: Global Integration, 2001-9-9 to 2001-9-11, Cambridge, UK pp. 197-205..

Zhong, JJ and Travis, ARL and Payne, FP and Moore, JR (2001) The anti-reflection coating design for a wedge flat panel projection display. SID International Symposium: Digest of Technical Papers, 32. pp. 914-917.

Zhong, JJ and Travis, ARL and Payne, FP and Moore, JR (2001) The anti-reflection coating design for a wedge flat panel projection display. In: The 32nd Symposium of the Society for Information Display (SID 2001), 2001-6- to -- pp. 914-917..

Zhu, M and Dowling, AP and Bray, AM (2001) Integration of CFD and low-order models for combustion oscillations in aeroengines. In: 15th International Symposium on Air-Breathing Engines ISABE, 2001-9-3 to 2001-9-7, Bangalore, India.

Zhu, M and Dowling, AP and Bray, KNC (2001) Flame transfer function calculations for combustion oscillations. In: ASME Turbo Expo 2001, 2001-6-4 to 2001-6-7, Atlanta, GA, US -..

Zhu, M and Dowling, AP and Bray, KNC (2001) Self-excited oscillations in combustors with spray atomizers. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 123. pp. 779-786. ISSN 0742-4795

This list was generated on Sat Sep 20 08:02:51 2014 BST.